How to use Tattoo Sheets on Polymer Clay

In this easy 3 minute video, we’ll show you tips and tricks to successfully using tattoo sheets on Polymer Clay.
*+*+Products Used *+*+
Pre-Printed Tattoo Sheets -
lunarlovedesig...
UV Resin -
a.co/d/aCBvLKa
Duraclear Polyurethane Varnish (If you dont want to use Resin!) -
a.co/d/7ysLf2q
Blank Tattoo Sheets (Create your own with Inkjet) -
a.co/d/0fDlscb
** I only recommend products I would use myself and all opinions expressed here are my own. This post may contain affiliate links that at no additional cost to you, I may earn a small commission. This is how I am able to continue providing free tutorials to the clay community. Thanks for being here! **

[@DJ-nd6vd]

Hi lovely! what a genius idea thanks so much for the tutorial!! Unfortunately the ‘blank design your own’ link doesn’t seem to be working can you give me the link here?

[@cocalinette]

Vidéo top par contre votre lien sur la feuille vierge n'ai pas valide dommage 😢

[@mariadejesusfiat]

It would be nice if you can show the cutting, i think it’s the main issue with this technique. However it’s a wonderful idea!! Thanks!

[@beablessing4435]

there are no links in your description as you mentioned. Where can we get those Tattoo Decals, what products are you using, etc?

[@sun-risen8686]

Hi, did u find out which tattoo decals?? TIA

[@LunarLoveDesignCo]

Oh my goodness, your right - Just noticed that section was missing! I just updated the list of all the supplies I used :) Thanks for bringing this to my attention

[@Vkreth]

Hello! It looks like the link to the blank paper doesn’t work, can you tell me the brand?

[@debbiebillman6262]

Is the clay dry when applying the tattoo?

[@brunnetteluv101]

The Polymer Clay is raw when applying the tattoo sheet. So it’s not baked yet. There is some moisture inside raw clay from the plastisizers but nothing enough to affect the transfer process. 😁

[@mtnsnowgirl]

How do you keep it from crinkling during baking? I've used others and let it dry before cutting, but once I pulled out of the oven, the pattern was crinkly and unusable.

[@brunnetteluv101]

Hmm, it crinkles during baking? I would try burnishing it down on your clay real well and making sure there is no air bubbles. I wonder what brand paper tattoos you’re getting - it could be a paper incompatibility. Does it have a paper brand name on the back?

[@mtnsnowgirl]

@@brunnetteluv101 I purchased them from another clay makers site, so I am not sure. It seems to adhere to the clay fine, nice and clear and shiny like a temporary tattoo. And I baked it like I do everything else, but the design looks cracked.

[@margarety5443]

Where is the link to the polyurethane coating?

[@LunarLoveDesignCo]

Hey Margaret, I just included it - thanks for the reminder! You can use either the high gloss or matte clear versions listed :) apply about 2 thin coats, a little goes a long way.

[@kristinakilby6798]

Those are really pretty are everything is done.

[@dianeharris2623]

Can you share a link where to purchase the tattoo images? Thanks so much❤

[@tracytesch7652]

ohhhh excited. i just ordered some from your website! cant wait to try! thank you!

[@cesarleylim]

What kind a tatto sheets i saw many on amazon and i am wander witch be better thank you Great tutorial

[@LunarLoveDesignCo]

Thank you so much! I hope you found a brand you love by now, (my apologies - I JUST now figured out how to use my comment sections ) if not, I just included the link for the brand I use in the video description. I've tried the silluoite ones also, but I wasn't a fan especially considering the price.

[@SGColours]

Thank you for this tutorial. I will try this method. I was trying with nail transfer... but it doesn't work. 😅

[@kerriefearby9542]

Nail transfers need the glue to stay on.

[@websitedesigner7158]

Brilliant

[@joyceparkes2678]

😻🙏🏽

[@maryroudebush5240]

What was your temperature on your oven and for how long to bake?

[@LunarLoveDesignCo]

My oven was set for 275 F and I baked them for 35 minutes. :)

[@carolineeewright]

Hi! Is there a trick to using this type of transfer? I followed this to a T but I noticed when I push the cutters down, it pulls the transfer inward, exposing some of the white clay. My cutters are sharp and I let the transfer dry for about a minute first, but I’m sure it’s still user error lol. I’m so excited to use my new beauties!

[@LunarLoveDesignCo]

Hey @carolineshipitzzz ! It sounds like its being streched of some sort. The only thing that comes to mind is if your clay slab might be a little too thick or if the inside of your cutter is catching the sides. Trying cleaning your cutter and testing out a piece of tattoo on a thin piece of clay. That should help! If not, shoot me a video in an email or DM :D

[@carolineeewright]

@@LunarLoveDesignCo thank you! I’m using an atlas and rolling it out on a 2, but I’ll try a 3!

[@LunarLoveDesignCo]

@@carolineeewright that should be thin enough already then. I use mine on level 1. Send me a video if you can :)

[@andrearossiello9969]

Which UV Resin do you prefer?

[@LunarLoveDesignCo]

I've tried ALOT of different UV resins, but my favorite it the colourpour one because its thicker and doesn't run down the sides of my polymer clay pieces resulting in a mess. Plus I noticed it doesn't yellow like some of the other brands I've tried. I added the link in the video description. Thanks so much for watching!

[@6736ganderjlo]

Thanks those are beautiful

[@LunarLoveDesignCo]

Thank you so much! :)

[@bjuana13]

This is so cool.. where can you get the tattoos from

[@LunarLoveDesignCo]

Hi Darling, I just added the link for the pre-printed tattoo sheets as well as blank tattoo sheets to create your own, located in the video details. Thanks so much for watching :)

[@bjuana13]

@@LunarLoveDesignCo oh wow! Thank you 😊 so much for everything 💕