How To Use The Dahua NKB1000-E Network Control Keyboard

In this new video, Connor goes through all the details of the ‪@DahuaUKIreland‬ NKB1000-E Network Control Keyboard including how to initiate & operate the device, how to control a PTZ through a recorder and solely through the PTZ.
We also demonstrate the different functions & features available through the device, like how to switch recorder channels split views, and options like zoom, iris and focus.
-=-
⌨️ Dahua NKB1000-E Keyboard:
www.mastdigital.co.uk/dhi-nkb...
🔗 Dahua DH-SD5A445GB-HNR:
www.mastdigital.co.uk/dh-sd5a...
🔗 Dahua NVR5216-16P-I -16
www.mastdigital.co.uk/dhi-nvr...
-=-
0:00 Intro
0:25 Setup Overview
1:01 Keyboard Initiation
2:00 How to Control a PTZ through a Recorder
3:55 How to Use the Other PTZ Functions
4:51 How to Switch Recorder Channels & Split Views
5:15 How to Control a PTZ Directly
6:28 Outro
-=-
Our Full Dahua Range:
🌐 www.mastdigital.co.uk/cctv-se...
Dahua Training Courses:
📚 www.mastdigital.co.uk/support...
Connect with Connor on LinkedIn here:
📲 / connor-lindley-74284a119
-=-
FOLLOW US ON SOCIAL MEDIA:
/ mastdigitaluk
/ mastdigital
/ mastdigitaluk
/ 4788659
#Dahua #AuthorisedDistributor #TradeOnly #MastDigitalUK #MastDigital #Security #DahuaTechnology #DahuaCCTV #NetworkKeyboard #PTZ #walkthrough #Technical #HowTo #NVR

[@Mark_M]

Good video, here's some things I have found on my NKB1000 & NVR5x-I: * Logging into the keyboard will also login to the NVR. This saves entering the pattern on the NVR with a mouse. This can be a downside if you setup the NKB with the admin password of the NVR, because then a user level login on the NKB logs into the NVR as admin. * Some camera functions can work with the NKB, I notice entering PTZ menu of my fixed thermal camera and 2+OTHER can activate the white light. * Controlling say channel 2 PTZ: 2+PTZ brings that camera full screen and activates PTZ operations. No need to select 2+CAM, then 2+PTZ. * You can change PTZ's settings via their OSD, say Channel 2 PTZ: 2+PTZ, then SETUP+OTHER and use joystick. * Pressing SHIFT turns on/off monitor tour. * Logging out of the NKB can be done by pressing ID, then ESC a few times. Pressing ID then another number logs into another device setup (e.g. ID 1 is NVR, ID 2 is a second NVR). * 1+AUX brings up Record mode, 2+AUX brings up PTZ mouse controls of the NVR's right click menu. * ENTER without anything else in use goes into the NVRs main menu.

[@Mark_M]

Downsides I would like Dahua to fix, or I don't know the function: * Toggling Arming/Disarming of the NVR. * Manually activating the siren and/or flashing lights on a TiOC camera. (In my case) a TiOC PTZ while you are controlling it. * Custom split screen layouts cannot be called with #+MULT. This would probably need an ID number set in the NVR's custom split screen setup. * A panic backup group would be nice, e.g. 0+FN sets the NVR to panic record a pre-setup group of cameras. (I keep all my cameras recording 24/7, but for some operators it could be useful). * Using the keyboard is not avaliable for searching on many windows, e.g. searching the human detection, facial recognition. * Manually activating an alarm output (relay)…. although this could get tricky with multiple Alarm boxes added. * Auto login on the NKB, I'm the sole user and I don't care about security of someone else using the joystick. * LCD screen backlight is always on or off. An option for the backlight to come on when the keyboard is interacted with, then a user set delay before it turns off (e.g. 2min). -- One really bad annoyance I have with the NKB100 (not the -E) is that it does not respond to an IP scanning tool other than the Dahua Config tool. It took me a while to find it's MAC ID so I could add a DCHP reservation on my router.

[@joaonascimento6276]

I don't understand about preset. I would like to know how to creat, to call and to clean (undo) the preset.