How to Use the ICOM IP Remote Control Software on an IC-7300

[@chunghawliew2956]

Thanks. Very clear and well explained. Good job

[@rtrjmk5]

Outstanding instructions. Thanks.

[@awregisb]

Si interesting your explanation, I use Mac and your vídeo Will guide me, thanks so much OA2DG 73's

[@normie5928]

Very helpful! Thank you for sharing!

[@n3uih2311]

I'm having trouble. I see and can remotely operate but I can not hear or transmit audio.

[@TheRetiredtech]

Great video Ken

[@af4od02]

Can you work digital modes through a vpn network? It seems like the timing would be delayed and qso hard to make.

[@stargazer7644]

Yes you can digital mode software. That's what the virtual sound card and serial ports are for.

[@RM-uj8gt]

I want to use this remotely on a laptop or tablet. Can you push the TRANSMIT button and then talk thru the laptop mic or addon mic to talk on the air?

[@JCB12345]

I am facing problem when cofigure RS BA 1 Ver.2 Remote utility for com port wehre the comport available had been used for N1MM. Do you have any idea?

[@DK5ONV]

I prefer to sit right infront of my Transceiver tweaking and tuning the Knobs to make signals become audible. 73's de Your Friend Uncle Guenter

[@normie5928]

Can you operate CW remotely using perhaps the keyboard?

[@user-ep6sl9nx1v]

hi! I have a challenge controlling the IC radio remotely using a different network, that is, the radio is on one network and the remote control is on another network. I want to control it from a distance. Can anyone help, how do I do it?

[@user-xt7yd8xw3h]

你好，这里BG4PVI想问问这个远程如何设置呢7300

[@ths3900]

Well done! Can you have HRD running for logging?

[@MichaelRandazzophotoguy]

Ok I did exactly as you said. My problem is when I go to connect the radio in the radio tab I get a "Real Serial Device Error" the server is connected but it won't connect with the radio in the radio tab.

[@SL-vh3im]

I'm having the same problem. Did you come up with a solution?

[@amateurshooter6054]

Hi Ken gr8 to see you always 73 AB7RR Bob

[@kg5nub]

i use a raspberry pi 4b to control my ft991A and don't have to use a computer to control a computer like is, my pi turns the 991A on or off and my pi is headless.... this is to much sugar for a dime....

[@ve4sbs330]

Thanks A Lot ... I got the solution about VPN, Now I can connect outside Internet using RS-BA1. 73 de VE4SBS

[@mtand73]

Couple questions 1. If we are away from the home transceiver and TeamViewer shuts down how are we supposed to restart with the password when we can't see our control screen? 2. All my audio comes out my radio not my computer. How do I change that?

[@mikegianfrancesco9431]

why not just do it with out vpn

[@tonymims2266]

I'm relatively new to remote radio, but I'm assuming without the VPN, you would have to forward UDP traffic via your router settings, which opens up your home network to security risks, unless you have more than 1 public IP address. I could be wrong, but I'm assuming that this works similar to using your home public IP address to host a web server without paying a 3rd party hosting fees, which requires port forwarding and opening up your network to potential attacks. The only way to circumvent this would be to have a dedicated public IP address for the radio server, which I don't know that residential ISPs would allow. But, like I said, I'm new to all this, so if I'm wrong, please let me know. I'm always eager to learn :)

[@mikegianfrancesco9431]

@@tonymims2266 Can make a static ip address and yes you need open ports but using wifi is also a risk in any other aspects with out doing remote in just general use

[@TheRealArobTheArab]

@@mikegianfrancesco9431 You have to authenticate to the VPN as well, which adds an extra layer of security over simply exposing a port or an IP address.

[@nubsey7291]

Team viewer will not now download.