How To: Use Tinkercad 3D Design Software 101

[@sebeling3]

Learned TONS about Tinkercard in 10 minutes. Much better than the built in tutorials. Gets right to the point. Thanks!!!

[@marcellemay7721]

I started parametric modeling with tinkercad. I quickly outgrew it within 2 weeks. I had some designs in mind but I just couldn't get the intricacies I needed without going thru too many workarounds. I downloaded fusion 360 and buckled down and learned the basics with the help of the many great video tutorials here in KZbin. Maybe it's just the way I think, but starting out drawings with basic shapes didn't work for me. I prefer using 2d sketches and extruding them out, because I'm so used to designing things that way. Fusion 360 is infinitely more powerful, and easier to get where you want to go with your designs. IMO

[@phillhuddleston9445]

For beginners this may be easier to learn or am I wrong?

[@donnawalsh1318]

@W. Productions wow

[@wyvern69420]

@Beef Candles rude much

[@davidgutierrez8297]

Thanks a lot. Found my 12 year old nitro gas rc car in the shed last week. Almost all plastic replacement are discontinued. This is going to give it new life.

[@PaulWilliams-bo6oh]

I am new to Tinkercad and your software 101 has shown me many new features and how to use them. The examples will help me in learning to make models in Tinkercad. Good job. Thanks

[@razielgrey5535]

This is a great crash course! Thanks for sharing the knowledge that is changing the world!

[@louisdelsesto2641]

Great video ! I’m as new as they come . I don’t own a 3D printer yet . My goal for first project will be making a very strong tight fitting ball and socket with custom ends to fit into a pipe . This video I think will be very helpful to start leaning tinkercad . Thank you

[@chuckhole]

Best Ray Gun design tutorial ever!

[@JenSpice]

Finally, the tools explained. Many thanks from an extreme beginner :)Jen

[@naomibirch5724]

Trying to learn tinkercad and this video is awesome!! Thank you for going through all the buttons and explaining what they do!

[@ianwelbourne5485]

Just seen your video, spot on for what I’m after, how would to make a cylinder but hollow? 🤔 been trying for a while and it’s not something I can work out

[@bingbongbilly921]

get a cylinder with a slightly smaller hole cylinder inside of it and group them together

[@starboy71]

Ive been using this for a while but this video was very helpful in teaching me things I did not know. Thanks!

[@premiumpizza65]

OMG THIS WAS SOOOO USEFUL

[@peterwhalen6599]

you doing the tinkercad unit as well

[@premiumpizza65]

@@peterwhalen6599 yeah

[@peterwhalen6599]

@@premiumpizza65 lol

[@Blackazza]

great starting point, thanks for the info

[@Monstah7]

Awesome Mate!! 👍 Thank You Muchly..✌

[@TheRealDrippyFam]

WOW! what a cool thumbnail

[@eagleviewhd]

Is there a way to duplicate an item in a polar array, like completely around a circle, with the objects spaced evenly completely around the circle? I would like to make a gear that has 80 teeth spaced around the outer edge of the gear.

[@untrapped1328]

codeblock can help you with that when you create new project you can choose between 3d design circuts or codeblocks you might need some coding knowledge tho

[@Er.SaurabhSagar]

Really liked your video Pal👍

[@azobchajin1491]

Thank you so much for this video! And Thanks Marco for the Raygun 3d printable object! It sure looks great! Thanks again boys.

[@williamhague5544]

He so I'm trying to make a wedge that is thinner in width in the front and wider in the back, are there any ways to change the width of just 2 corners? I know there is a way to do this in Blender, in editing mode, but I'm trying to learn this program, is there something similar to what blender has, where you can change individual corners?

[@madisonmasontv]

Great Alex, thanks. Never used any 3D modeling ware and you made this really comprehensible. Gonna try it.

[@Adhvikreddy-rb6qg]

bro just helped me with my holiday homeworklol

[@JasonLooseArrowAlso]

Thanks for the video, it was helpful!

[@theinnovationclassroom]

Great video

[@floridasaltlife]

Fantastic video !!

[@palparknj]

Good tutorial. Thanks for playing the same 2 measures of a garage band song over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over.

[@kwey07]

and over

[@parkernguyenn]

(Ctrl + C) + (Ctrl + V)

[@peterwestyorkshire3016]

This tutorial is just what I needed, but I cannot use it sadly. The music drives me Mental! Literally. Why did you add it even? I don't get it. It would have been so much better with silent background. Pleeese!

[@phillhuddleston9445]

That would be a really crappy garage band.

[@TheGameCamer360]

How would I add day a brick texture to the walls of a house I’m designing? Really struggling with that?

[@decoater72]

This was so helpful thank you

[@edilsoncorrea117]

Very straightforward. Thanks.

[@Willy-c7g]

wow this for this video , I am so new in the world of 3d , sorry if my question is not smart but this program is compatible with endear 3 or purse i3 😅 because I so extreme beginner

[@MatterHackers]

The designs you create in TinkerCad are definitely compatible with those printers - just be aware of the slicing software you are using and make sure those are specific to those particular printers for best results

[@SuperdanTech]

Nice video!

[@TheWilsky]

Really informative thank you!!!!

[@jaredsayrc4947]

I'm trying to edit a design for a cust rc trying to make a shock mount for a Traxxas Street Sport

[@tonycstech]

Free from autodesk ? I dont think so. Maybe for a while until it gains enough popularity and enough projects gets stored in the cloud to use a blackmail to force you to pay for account in order to access it. We all know how autodesk operates.

[@jasonbaker541]

I want MOAR of this!

[@Abdulhadi-du6cq]

how did you slect both of them

[@Tracks777]

Great stuff :)

[@rnussle]

Really well done, the only "problem" I had was that in some cases the explanation was too fast and I'd have to go back - it is not a complaint, just an observation. The only other thing I would like to comment on is that as of today there are 222 thumbs down. I cannot understand why you would even have one. I'm looking forward to another video and will probably watch this again. Thank you for your expertise and clear instructions.

[@seamonkey101310]

Is there a way to move your 3d design things to a different account

[@John-NeverStopLearning]

Make bowl using a solid object and inserting a hidden object. How do you add a solid post or cylinder into the bowl from the bottom to above the top edge of the bowl? Everything I have tried the post disappeared from the bottom of the bowl to the top edge. Thank you

[@ChinaAl]

Hi Great Video thanks. I've been working with Tinkercad and trying to learn.

[@joseangelwing4089]

I love this video!!! I got the information I need it!!

[@daniellandberg4742]

I bought a tronxy x3 3d printer from a pawn shop without researching 3d printer first, my bad. I've been trying to learn the tinker-cad workings but can;t seem to get it to do what I need. I picked a trapezoid shape and need to flip it on it's side and hollow it to create a box. I haven't played with it enough to get it right, I get to frustrated. Any suggestions would be helpful.

[@MexieMex]

How do you make a tapered pipe with a curve in it?

[@brycen3159]

How do you get that thing in the top right corner

[@legendaryphoenix8607]

thanks man. helped a lot. gg stay awesome

[@Retronize84]

OMG. I've been using blender. This looks sooooo much easier, lol.

[@forbidinjustice]

3D-printing noob here. It really is. Even for text, the dimensions in Blender weren't correct. I imported custom fonts into TinkerCAD and it's spot-on. Definitely going to use this as far as its capabilities will take me.

[@FirstWorlder]

what a soundtrack!

[@aliday9968]

Hi Do you still have opportunity to see {□} button and create your own shape generators on js. How to enable this?

[@elonmusk1270]

How to make tinker cad gears move and show the gear movement

[@strangedaysarethese]

Good stuff mate, Thanks

[@christisking891]

i want you ro do somethign where you can change the color of the blocks

[@autoplayerp9911]

how do i cut into the box? example: so i have the height around the perimeter but not inside

[@jaredsayrc4947]

what about editing a STL file

[@salmaali2831]

So helpful thx

[@navidalvey4215]

Is it possible to keep the colors of individual objects when they are grouped together? I see that when you group the cylinder and box together, the both become orange. I'm having trouble with all of my colors becoming one when I group them, and I don't know how to keep the color of the individual objects.

[@Calebs.bowling]

Yes if you go into the drop down menu of a grouped object and click solid you get color options then click multicolor and you will return it to the original colors before you grouped them

[@samfriedman2301]

I think that SelfCAD is the easiest to use for beginners. (at least for me)

[@tothemax3278]

Let’s say I want to make a spiral flower vase, how would I do that?

[@skjames09]

@@bkkorner You can play around with the settings until you get what you want.

[@StarLabs3D]

Very interesting

[@mhymyk4022]

I just started using this today. I'd say it works for beginner stuff, however trying to use decimals in place of fractions for inches, is kinda irritating. Since 16ths converts to 4 digit decimals, it rounds something like .3125 (3/16) to .31, and .875 (7/8) to .9. Is there a way I can allow for a 4-digit decimal reading?

[@wkopsdfsadf7373]

I know I'm late, but no. That's the way their computers read decimals. TinkerCAD is supposed to be really beginner level friendly, so they don't expect them to be using decimals in the ten thousandths place.

[@prateekkulkarni3239]

Please can make a video in which u are designing a machine

[@naderih1]

This is cool because i use tinkercad in school and im a student in intermediate

[@___-tu5cy]

Are there software that you can 3D print using a phone

[@bassamry]

Thank you! it really gave me a good point of view to use tinkercad!

[@marster_1203]

Thanks for this video! Is it ok to use this video for a class project?

[@jeffreyorgis]

Can you put files and Clice them in there

[@Ziggyone1224]

can you import thing to print like picyures of things

[@saritatiwari228]

Can I use this on my I pad

[@simonyoung6120]

How do you multi select... ?

[@queenidog1]

Looks like a good tutorial but your little black mouse cursor is hard to follow. Try using a big yellow one, or like others I've seen, a big yellow circle around a pointer.

[@Chris-vc1dh]

How can I design hollow figures and set wall thickness ?

[@Taidanabanana]

To make hollow figures just copy the model make it smaller then centralize turn the model to a cut toll then fuse it and tada done

[@Chris-vc1dh]

@@Taidanabanana thank you

[@brendasalazar9003]

Why can't I print my design? I press print and the printer prints a line. Help please!

[@ralvin3614]

whyd i think i was gonna learn how to make a laser gun for my first 3d model lmao

[@bullitanaconda]

Why did i lost the shape menu????????? Whats going on

[@cosmo7816]

Can you set the printer bed size in tinkercad?

[@De_Raaf]

Yes, go to the bottom left of the work space and select settings.

[@Oddlysatisfying91]

how to increase the grid size more than 60 inches ??/

[@felixdietzCGN]

I somehow never saw that align tool even thou i used tinkercad a lot now, thanks! Also: plug in your charger.

[@iliannamendez9718]

What if it won’t let you group

[@steve87thpsap]

Wow how fast can go doing this. Maybe taking a hearth so we can see what you are doing. I guess I’ll find someone else to explain this.

[@edaps]

You can always reduce the speed of the video or even pause it to better suit your needs :)

[@jamespfrommer2003]

Can you do a video to show how to make porcupiney porcupine from south park?

[@source6901]

Hi, do you why my group and ungroup would be disabled?

[@PrintThatThing]

AWESOME!

[@zaccomusic]

nice video I hope you keep update :)

[@SigmaPhonkBabyGronk]

I’m in 6th grade and we use autodesk inventor 2014

[@anoopkumar-zv2zh]

Nice

[@francisreyestalusig8432]

I feel like animating in minrcraft using command block would be easier

[@sonumtailor4698]

Hi

[@JustWasted3HoursHere]

TinkerCAD looks easy and fun, but it looks like it doesn't support any sort of texturing/materials. :(

[@jarekl787]

could be very good, if it was slower. I guess, it is OK for someone who already is more at ease with it

[@sunilgrover8716]

i am a student and please tell me that where we get a invite code please tell me

[@tjesse]

Sign up as an 16 year old.

[@jahfaricoumarbatch3947]

side burns are real

[@adamz004]

Thanks

[@ethanaudette1502]

Anyone else not able to figure out how to select two things at once

[@mama86163]

Click to select the 1st and press shift and click the second object

[@abuxxx3607]

Wow! Thanks. Just sub.

[@adrividmishra2258]

Can you please make a 3D printed off road rc car using tinkercad

[@johnhenderson4837]

wheres the ray gun from the video i clicked on?? NOT HERE thats for sure!

[@rhynofn]

to me its easy to make simple shapes with cutouts and circles, but its a pain to make chamfers and rounded corners

[@rhynofn]

this video just solved my problem, didnt now about that

[@bannerman100]

This looked useful and interesting, but I stopped and gave up in less thatn two minutes because of the incredibly annoying background music. (I am sure I am not the only one !) Please do you have a narration only version ?

[@danieleastman7093]

your mouse is too small and you move it too quickly. To teach me you need to pause your mouse so I can find it Picking the right tool is more than half the skill I need. If you have only 4 minutes slow down and throw out half the repetitive stuff

[@nikonar9563]

put the video in a slower playback speed

[@lovawaldman8944]

hemskola e kul

[@NielsLinneberg]

great video! … but why, oh why that anoying “music”, it drives me crazy :-(