How to vinyl wrap a Shaker Door - The Ultimate Guide - using the RM wraps architectural films

Looking to update your kitchen cabinets without spending a fortune? Architectural films can be a great way to do just that! In this video, I show you how to install a vinyl wrap on a shaker door.
VIDEO CHAPTERS:
00:00 | Hello!
00:07 Installing the middle of the door panel
00:40 Installing the frame area
01:15 Cutting the frame area in the middle
01:49 Using the straight edge on the corners
02:26 Double-cutting the corners
04:36 wrapping the other side of the door
This video is about how to use the Architectural film Squeegee. This Architectural film Squeegee is made for Architectural films.
Here's a link to see the materials or patterns that Rm wraps have.
www.rmwrapsstore.com
Main website to order the Architectural film Squeegees
www.rmwraps.com/shop-products...
---------------
Here are some more videos to watch and learn how this Architectural film Squeegee work.
Holding architectural Film squeegee the right way.
• Holding architectural ...
Classy Architectural film Squeegee Made by Rm wraps
• Squeegee made for Arch...
Installing with the Classy Squeegee July 2020
• How to Install Archite...
Follow the arrow Classy Architectural film Squeegee July 2020
• How To Install Vinyl T...
Spacers Classy Squeegee Rw wraps
• Learn why the Architec...
Harness Classy Architectural film Squeegee Rm wraps July 2020
• Harness Classy Archite...
How to install a wrap Inside the Drawer Rm wraps Classy Squeegee July 2020
• How to install a wrap ...
How to install a Shaker Door Architectural film wrap using a Classy Squeegee Rm wraps
• How to vinyl wrap a Sh...
Daughter testing the Architectural film squeegee
• Daughter testing the A...
New Worker B squeegees from Rm wraps
• New Worker B squeegees...
The point on the architectural Film squeegee Rmwraps.com
• How to use the pointer...
Working on the job site with the Architectural film squeegees.
How to wrap a ceiling in a Di-Noc Architectural film Wood grain pattern Rm wraps
• How to Wrap a Ceiling ...
How to wrap a ceiling in a Di-Noc Architectural film Wood grain pattern part 2 Sept. 2021 Rm wraps
• How to Wrap a ceiling ...
How to wrap a Door frame and Door with Architectural Film Rm wraps July 2020
• How to wrap a Door fra...
Di-Noc Architectural film magazine holder wrap Rm wraps
• How to install the 3M ...
Di-Noc aviation jet wrap interior Technique June 2021 Rmwraps.com
• Little Technique Using...
Sanding the edges of the Architectural film Rmwraps.com
• Sanding the edges of t...
Harness on an Architectural Film Squeegee
• Harness on a Architect...
Architectural Film squeegee flat side
• Architectural Film squ...
Commercial Building Wrap Nov 2020
• How to Wrap Railing in...
-------------------
The Felt side is 4.5” long. Left side is 3” high and the right side is 1.5 “ high.
1. The arrows lead you in the right direction to go. The squeegee needs to be at a 30-degree angle to force the air down and out, by creating said arrows we can facilitate customer use.
2. The 3 lines are made to cut at the corner of the subject by using the 90-degree gap.
3. The thickness of the Architectural Finish Squeegee is 1/8 in or 0.125 in, with the sole purpose of being used as a spacer.
4. If the 1/8 does not suffice, you can use the 4 slots on the top right corner which are meant to be used as spacers, as well.
5. For a round corner cut, you can use the top left corner of your squeegee.
6. The top left half an inch over is where you can put your blade and cut the vinyl. It will hold the blade in place and the Architectural Finish squeegee will force the vinyl down.
#squeegee #rmwraps #Architecturalfilmsqueegees
RM WRAPS LLC
357 E Watertower St Suite A
Meridian Idaho 83642
Randy Miller
208-696-1180
Email: [e-mail]
Custom Wraps: www.rmwraps.com
Architectural Film Store: www.rmwrapsstore.com/
Social Media
TikTok: / rmwrapsllc
Pinterest: / rmwraps
KZbin channel: / rmwraps1
Main KZbin channel: / @rmwrapsllc
Instagram: / rmwraps
Facebook page: / rmwraps

[@DANNFIGDESIGNS]

Watched quite a few videos and this one is the best one so far. Thank you. Your views should rise.

[@RMwrapsllc]

Glad you liked it!

[@johnnyv5995]

Do you have any demos of shaker door with raised panel? Thank you.

[@enginguler7033]

Bravo hatasız tam profesyonelce

[@lisamarie6110]

ugh you make it look so easy, I tried it from one of your older videos where you put the long side pieces on first then the shorter side pieces then the center, but the double cut on the shorter top and bottom sides got the best of me. I pride myself on being a DIYer anything from my car to my home and I craft up a storm, I am pretty patient but this was frustrating I have wasted so much vinyl. Any helpful hints about the top and bottom double vinyl cuts? I got one corner almost perfect but the other three had crinkles and slight gaps not sure what I am doing wrong grrrr. Thank you!