HOW TO VINYL WRAP THE ROOF ON YOUR MUSTANG! (3M 2080 GLOSS BLACK)

If you guys enjoyed the video be sure to leave a like, lets get this video to over 100 likes! It motivates me to keep dropping more content for you guys, lastly, before I leave, spread positivity, keep grinding towards your dreams, and just be you ❤️
Follow me on Social Media ⤵️
TikTok - / kingdariuus1
Instagram - / sandtrooper_s550
Donations to help the channel grow :
All proceeds go directly into making this channel better! Remember this is your money and you are not required to donate, but if you would like to do so out of the kindness of your heart.
Here is the link ⤵️
www.paypal.me/...
My Main Cameras/Microphone:
Sony a7R II - amzn.to/3r1iBhi
GoPro Hero 8 - amzn.to/2UFxABy
Rode VideoMic Pro - amzn.to/3AOANPJ
Rode VideoMic Me-L - amzn.to/3gy2kwt
My Other Gear
Tripods
amzn.to/3yN6eb9
amzn.to/3AYTkcn
Tripod Adapter For iPhone
amzn.to/3jeRZqT
Memory Cards
amzn.to/3AQD6Sb
amzn.to/3hueib1
A GOOD VLOGGING CAMERA
amzn.to/3r3F79u
#glossblackwraponmustang
#mustanggetsnewroofwrap
#mustangmods
#mustangbuild
#mustangs550roofwrap

[@westsidewilly96]

Came out perfect bro! Looks great. Great video too!

[@DarielGuerrero]

Thank you brotha, i appreciate it! 😭

[@jimsmith8797]

Bro what grill is that? Looks good af

[@DarielGuerrero]

Thank you brotha! It’s the cervinis upper & lower grille, you could purchase it through cervinis.com or americanmuscle.com 👍🏽

[@Wildwallyjay]

Definitely about to do my roof and hood scoops now thanks bro🔥

[@DarielGuerrero]

yuuuup no worries brotha 🤝🏽

[@mt6nin825]

Laughing out loud, tried wrapping my 370z roof. Started getting crease along wrap. 45 minutes later, ended chucking the wrap. Be nice to find like a black trim to cover the edges of the wrap on driver and passenger side. Nice vid.

[@DarielGuerrero]

damn i’m sorry about that brotha, that happened to me when I first did my wrap, it definitely made me not wanna try again but here we are, decided to give it another try but this time using 3M and it worked out 💪🏽 i would try checking premiumautostyling’s website they sometimes have stuff like that 👍🏽

[@ag_mk7]

Love it man! I plan to open a wrap/car shop by July in Cali, pretty dope how you did it by yourself!

[@DarielGuerrero]

Thank you bro! I appreciate it! Where in cali??

[@ag_mk7]

@@DarielGuerrero Temecula area 💯

[@DarielGuerrero]

@@ag_mk7 that’s awesome bro, wish you the best of luck! 🤝 you’re gonna kill it!

[@DPHC13]

Thank you for showing how the knife less tape works.

[@DarielGuerrero]

of course! anytime! 👏🏽

[@rlstang7276]

👍🏼👍🏼👍🏼 good video my friend, what alcohol to use?

[@DarielGuerrero]

thank you very much! isopropyl alcohol 👍🏽

[@rlstang7276]

@@DarielGuerrero thanks man👍🏼

[@TCtrucking]

Nice video and nice car, did u get it off amazon or do you so happen to have a link? Sorry i just want to buy the same one and how is it holding up

[@DarielGuerrero]

got you bro 👍🏽 here’s the link : 3M 2080 G12 Gloss Black 5ft x 5ft (25 Sq/ft) Car Wrap Vinyl Film a.co/d/dysASMG

[@DarielGuerrero]

still holding up to this day, and still glossy 👍🏽👍🏽

[@ourworldmridgaf7774]

What did you use to prep the surface before you layed down the wrap ?? Thank you 🔥🔥

[@DarielGuerrero]

i used isopropyl alcohol right before laying down the wrap, but first i wash the entire roof of the car make sure to get all the dirt & debris out

[@oscarmorales1621]

Thanks for the tutorial. I gonna try it myself! What chin spoiler is that? Looks so good?!!

[@DarielGuerrero]

Thank you brotha! Yeah definitely give it a try, it’s not difficult at all! It’s the cervini chin spoiler , i bought it from americanmuscle.com

[@joshuaperry765]

No heat gun? I’ve seen people apply heat around the surface. It looks great.

[@DarielGuerrero]

not with this specific one from 3M, you don’t need to apply heat, it’s very sticky, so you have to make sure you lay it down the way you want it to or else it’s going to be hard to un stick, thank you brotha, appreciate you 👏🏽

[@PercalTM]

I was wondering how long this will last last? I don’t have have garage so I have to park outside. I want it looking good for at least 5 years but if it’s only a year not sure if I will do it

[@DarielGuerrero]

It could last up to 7 years if properly maintained! 🤝

[@dannyphantom907]

Your haircut is clean bro, respect lol

[@DarielGuerrero]

appreciate you my boy 💪🏽

[@kingcalero1088]

you dont need to apply any heat for it to stick?

[@DarielGuerrero]

not for this material, it has self adhesive, no heat needed 👍🏽👍🏽👍🏽

[@kingcalero1088]

@@DarielGuerrero hows it holding 2 years later? looks so clean with the blackout rooftop I'm about to do this on my mustang and use your tutorial :)

[@DarielGuerrero]

@@kingcalero1088 honestly bro, it looks exactly how it looked the day I installed it, even after having it for 2 years, HIGHLY recommend, yeah it definitely looks sleek with the black rooftop, that’s awesome man, if you have any questions let me know, i’m here to help 👍🏽

[@Sophiauss]

Does heat from the sun effect the wrapping process or is it okay to do it outside

[@DarielGuerrero]

I would highly recommend doing it indoors, as I feel like the sun would mess up the wrapping process, since the surface is hot, when you go to lay it down, it’s going to STICK, and it’s going to be hard for you to maneuver it around

[@eduardogil2872]

Hey bro! How big would I need a wrap for my mustang hood? It’s a 2018 :)any help is appreciated

[@DarielGuerrero]

honestly i am not sure bro, but if you get a tape measure and measure width & length you’ll get the exact - feet x feet measurements

[@ahmadshaker284]

got mustang its hardtop plastic rear window is ripped, can I put 3m sticker to fix it?

[@DarielGuerrero]

Honestly I feel like the 3m would hold the ripped window perfectly fine.

[@MustaliS550]

How did the wrap hold up? I’m considering adding rubber grommets myself so the vinyl lasts longer

[@DarielGuerrero]

I’ll make a video sometime this week, to see how long it held up, but it holds up very well honestly, definitely worth investing in.

[@MustaliS550]

@@DarielGuerrero upon doing it myself, you did a much better job than me and I’m probably gonna have to redo it lol. The s550 is so wide I had trouble reaching the mid section even at 6’4 so I ended up with a few wrinkles I couldn’t be bothered to fix.

[@DarielGuerrero]

@@MustaliS550 don’t worry man, it takes a couple times till you get it down, at least you tried, forsure next time you’ll get it 👍🏽

[@MustaliS550]

@@DarielGuerrero rather do it 3 times my self and gain a new skill than paying someone to rob me of that experience 👍

[@Po_goes_brrr]

I wonder if floss could be used as a knife less tape substitute

[@DarielGuerrero]

honestly not too sure, could be but i don’t think it’s sharp enough, the wire that comes with knifeless tape is pretty sharp 😅

[@Po_goes_brrr]

I tested it and found that floss will work with a stiffer vinyl like vvivid, however I went with Avery which is more pliable and stretchy so knifeless tape was necessary to get a clean cut. 👍

[@DarielGuerrero]

@@Po_goes_brrr that’s awesome, good to know 🤝🏽

[@Natedogggg1251]

Amazing video wanna do it on mine how do maintain it and where did you get the wrap

[@DarielGuerrero]

appreciate you brotha, don’t forget to subscribe, a lot more videos coming! i purchased the wrap through amazon, fast shipping & cheaper prices, i would use detail spray every once & a while

[@Natedogggg1251]

Bet thanks bro I appreciate it!!

[@DarielGuerrero]

@@Natedogggg1251 of course brotha no worries!

[@KK-ce9ep]

I tried this on my mustang with the vivvid vinyl wrap, and it was way harder and gave me wrinkle lines that ruined the wrap, i couldnt even get it out with a heat gun, im retuning it and trying the 3M hopefully it is easier to work with

[@DarielGuerrero]

oh yeah way easier, i wouldn’t recommend vivvid, that was the first brand i used & it was horrible, horrible quality & you can’t work with it because of how thick it is, lemme know how it goes with the 3M, you should be good though

[@Llando]

tried wrapping my roof with vvivd TWICE, failed both times. Its legit impossible to apply, I wonder how that brand is still alive today.

[@Unknown-wh5fi]

Straight forward, simple, well explained. Thank you! No hate but low key cut down on the "ok guys, hey guys, so guys". Great video!

[@DarielGuerrero]

appreciate you brotha! sorry man i know it could sound so repetitive 🤣

[@keovlogz7025]

Bro wtf are you talking about 💀

[@TrVlogs82]

Looks so nice man you did good.

[@DarielGuerrero]

thank you so much! 😭

[@JOSEF_GAMING45]

I have a 2012 should I use the tape or not I do have rubber on each side

[@DarielGuerrero]

i would suggest taking off the rubber molding & tucking it in, that way it will look much cleaner! but be careful when taking them off use a pry tool and be gentle might be brittle & break off the tabs

[@JOSEF_GAMING45]

@@DarielGuerrero thanks for the information

[@DarielGuerrero]

@@JOSEF_GAMING45 anytime brother 🤝

[@jacobb9177]

you say you used 3m gloss black but we can see on the sticker that it's a vvivid wrap

[@DarielGuerrero]

the manufacturer that resells them is vvivid but it definitely wasn’t vvivid material, vvivid is very cheap and hard to maneuver, the backing paper that holds the wrap says 3m all over it

[@coolboy4555able]

Great vid

[@DarielGuerrero]

Appreciate you brotha

[@brayanvaldez9978]

What vinyl did you use bro ?

[@DarielGuerrero]

3M 2080 Gloss Black brother 👍🏽

[@RicoS197]

@@DarielGuerrero which website you bought it from and size?

[@DarielGuerrero]

@@RicoS197 Amazon, 5’ x 5’ so pretty much 60” x 60”

[@leogeo8204]

Dont you need a thermal pistol? Or some other guys spray first and then they use the card.....is this optional?

[@DarielGuerrero]

no this material doesn’t need to be applied with a heat gun, you also don’t need to spray the surface before squeeging it, it comes with a very thin protective film as seen on my video, so you could use the squeegee without spraying soapy water now if you go with a different brand as in Vivid then most likely you would have to do it like you’re saying

[@isaiahimv366]

what’s the size dimensions I couldn’t understand what you said in the video

[@DarielGuerrero]

5’ x 5’

[@ceasarjohn9663]

Where’s ur antenna ?

[@DarielGuerrero]

my model didn’t come with one, probably an upgrade you have to pay to have it or something

[@stephenfarmer2216]

Thanks bro

[@DarielGuerrero]

got you brotha 👍🏽

[@tanocapote669]

what bumper is that?

[@DarielGuerrero]

stock bumper 👍🏽

[@tanocapote669]

@@DarielGuerrero what grille then? my bad😅

[@tanocapote669]

@@DarielGuerrero looking forward to wrapping my roof it looks cleannn

[@DarielGuerrero]

@@tanocapote669 you good bro haha, cervinis upper & lower grille

[@DarielGuerrero]

@@tanocapote669 yeah bro do it, it’s definitely worth it!

[@ShaneSVT]

You glassed that out so easily. I’m wrapping my roof and it is so hard to glass it out flat

[@DarielGuerrero]

damn fr bro? what kind of material are you using? and is your roof all flat or does it have some body lines to it?

[@Llando]

you prob using vivid, vivid is mega garbage, impossible to apply

[@PersonalUseChannel]

I wouldn't mind paying 200. 3M vinyl material costs over 100 anyway.

[@DarielGuerrero]

it’s about $70 for the roll for a 5’ x 5’ which is the roof dimensions of the s550 mustang

[@PersonalUseChannel]

@@DarielGuerrero not on mine. I need 5' x 8' and I don't have mustang.

[@DarielGuerrero]

@@PersonalUseChannel ahh i see, yeah in that case I would just go with the 200$ service charge

[@TopMach1]

2015 to 23 mustang btw

[@DarielGuerrero]

I kinda figured there roof would be different since new body style, so I didn’t want to give false information, but if it works up until the 23’s even better 👍🏽 thanks!

[@lordabstract82]

I’ve got some decal damage on my roof from a previous owner. This is something that was suggested to me, until I get around to actually repainting my ride. What do you think? Because I feel like this is the way!

[@DarielGuerrero]

I’d definitely recommend it, if the surface is not smooth, i’d suggest sanding it down because if it’s got paint peeling etc you’ll be able to see it once you lay down the vinyl, but if you don’t mind it you could always just wrap over it 👍🏽 let me know how it goes!

[@lordabstract82]

@@DarielGuerrero I will bro. My boy has the whole kit I need to grit that crap down and do a fill in and a buff job to make the correction before I do the wrap. 🫡

[@Daddybomba]

Cool video bro, I will do mine too, next week.

[@DarielGuerrero]

thank you bro, hope this video helped you out!