How to wood repair

[Brian L]

That’s an awesome way to turn a knot into a new knot

[Brian L]

@PJ Ostrowski knot really. Knot that I even care. Looks like your Knot amused.

[Cristofer Vidz]

I’m knot even going to say anything

[PJ Ostrowski]

Brian - before you troll, it’s a good idea to know the difference between a knot, a check or a shake

[david thomas]

🤣🤣🤣🤣🤣

[Ronnie Alexander]

I told myself I wood knot comment 🙇🏾‍♂️

[Silvia Pimentel]

Amei o praticidade 🤗🤗😍😍😍👏👏👏👏🥇🥇🇧🇷🇧🇷

[Jaden Allen]

This is how we learned to fix small cracks in woodworking class, except we use super fine saw dust mixed with the wood glue it looks alot better that way

[Jaden Allen]

@Cristian usually it the sawdust straight from the plank of wood

[Cristian]

And also preferably same colour saw dust as the wood that is to be fixed.

[Татьяна Ляшенко]

Я так реставрировала старую дверь, только вместо клея, использовала жидкое стекло, тоже, очень крепко. Вам спасибо, что делитесь умными идеями. 👍

[Roger Stewart]

They have this product at Home Depot called “wood filler”.. Works well.

[D00M970]

They made wood filler for noobs like Roger Stewart. Comes with a helmet and a safety blanket

[ColoBassThumb]

The issue is that wood filler doesn’t change color with the wood over time, this does. They use this method a lot in flooring installation to fill in from top nailing

[manaquri]

In France we don't have any Home Depot.

[Manuel Quito]

I think it works better

[Mark Orellano]

Restoration of an old knot to a new knot. Genious!

[Hoi T. Toity]

Genious? It's genius, GENIUS?

[Lovely]

The word is genius, ya genius. Im assuming you're *knot* one. xD

[Baw thai only👀]

Mimi ni sanamu best. Petitte.ICU 💖 daima ziko moyoni mwangu. kesho sijui. Wao ni moja ya matamasha bora..💕.

[Maria Do Carmo Lara Oliveira]

Isso eu ja aprendi, já fiz e deu certo, achei ótimo, agora aproveito mais a madeira, antes eu cortava!

[Luiz Assis]

Perfeito 👏👏👏👏

[Jean Marceaux]

Y'know, I recall watching a guitar repairing channel, twoodford, do this kinda trick, to repair small cracks in the fretboard or fill fret holes and whatnot. He always stays humble, admitting his fixes are not comparable to an unbroken thing. They would look LEAGUES above this at worst.

[M. Riggs]

If you use fine wood dust it'll turn out beautiful. For strength one can use epoxy instead of wood glue too.

[Missingthe80's]

You can use sawdust to better effect. Either use an abrasive tool and sacrificial piece of wood and if you want to get extra fancy use a rock tumbler as a ball mill, fill with ball bearings and saw dust from a rasp, it's much much faster to get course saw dust then reduce it to powder in the mill. Makes a great filler that can be color matched with some effort with a heated piece of wire.

[ashok]

Don't take the knot powder as its darker. Use the brightest part of the wood powder and then fill it.

[Michael Levi]

Congratulations, you have discovered my truck to patch small portions of particle board. Unfortunately it does not work well on real woods. Epoxy would have been much better, fill it up about 1/16 below the surface of the wood and it leaves it nice and shiny while still displaying the beauty in rustic wood. Fill it above the wood a bit and sand flush for tabletop stuff.

[bovinicusdivinicus]

I've actually done this. It works if you need a surface for painting, otherwise just replace the piece with another ounce, that's the best you can do.

[Chris B]

Great prep to remove the sap and debris. Then you had to mess it up, natural imperfect wood filled with clear resin would look 1000 times better.

[Micko]

What he did is old school, Resin isn't.

[Ronnie Coleman]

Never know, Maybe that resin wasn’t easily accessible, or they couldn’t afford a wood filler. People improvise for quick fixes, & this looks like one to me. You never know. Either way, it looks perfectly fine. Almost better than brand new. May not set too long, but it still got a view from someone lol

[Collin Taylor]

Idk why people get rid of the knots I think they look awesome and they’re what makes each piece of wood unique

[Joy Bernard]

Well done! Very helpful-thanks

[Ric Hyden]

Contrary to what many others are saying this is a good tip to the home DIY. Filling the gap with fine wood dust/glue mix creates a much more natural look over any other chemical filler. I saw where one of the comments was "way to replace your knot with anther knot ..." yep... the whole left but the wood separating it is being replace by something that looks close to what should be there. Why is this a bad thing?

[daisoca1]

Fantástico 😘👏👏👏👏👏👏👏

[Elisabeth Williams]

Just use wood putty that matches your chosen timber colour. Pva glue has the tendency to turn grey over time

[The Flame 1965]

Wow thats amazing! i always wondered how to fix those.

[Juli B.D]

quedó lindo 😊

[Fernando Abata]

Recuerden esta reparación sirve si es para un fin estético y no estructural. Saludos

[TJ]

Can you show it after a couple days when it shrinks? That would be cool.

[Dalton Hoffman]

@Redneck Zombie that's one option. For board stock I intend on painting I find that Bondo is a quick and effective solution. For board stock that will get a clear stain finish I mix black paint with Bondo and it turns out nice.

[Ron Haring]

Or after a rain storm!!!

[Redneck Zombie]

@Dalton Hoffman this is the main issue with using glue vs just wood filler. Honestly both options suck. Just cut that shit out and use the good wood around it. Or as I’ve said in other comments just get better wood to start with.

[Dalton Hoffman]

Agreed. This will shrink. It also will not take any finish not even primer will bond to it

[Timsey Tiger]

Mixing in the dark brown dust from the knot was a mistake, at least use dust the same colour as the wood. It will still look bad, but won't draw the eye as much.

[ŁSĆ Ŕ Ī Tůßə]

Great work ! That little cutter "knify" tool thingy is SAVAGE !

[Ron Car]

In my best Forrest Gump voice: "A knot is still a knot no matter what you do to it! (👍)

[Ron Car]

@Jennifer & Doug Debnar 👏👏👏👏👏👏👏👏👏 Any Jenny or Jen I go by Ron. 🥸

[Jennifer & Doug Debnar]

"I know what a knot is Ronnie"

[Hannah Robbins]

Thanks for sharing your skills!!

[Myles Gratton]

Nice nice. It looks exactly like I did when you started

[Baw thai only👀]

That *PetiTTe.Icu* love your of the moment videos. Blessings beautiful Celina may God take care of you wherever he wants..

[G RAWS]

@Dan Gerous that's what wood filler is for

[Mega Tron]

@Dan Gerous lol android autocorrect is a wonderful thing

[Dan Gerous]

@System Bypass Nah, There are lots of instances where you would do this before sanding and staining or sanding and painting. Not every project requires unvarnished natural wood. If that's the look you're going for then you wouldn't do this.

[Dan Gerous]

@Mega Tron You're supposed to sand and stain it after you do this.

[Tara Druid]

Отличная идея👍❗

[Алексей]

Опилки и пва клей, классика. В школе на трудах так делали)

[AdventurEss]

I love how all the experts here in the comments section, have obviously never had to patch a hole in a piece of furniture that's going to be painted. This is literally what we do in the field when we don't have wood filler.

[Hell awaits]

I’ve seen gum stuck on the bottom of tables look better then that!

[Scp049dr]

True

[Своя игра]

@Mario Miehling с вами и обсудить с тобой не ответил закрутился с вами по Скайпу в цвет и это будет время посмотри кто будет время посмотрю на человека не было в

[Mario Miehling]

Just what i thought 😂👌🏽

[Corinne 💦Need S🍆ucks]

Restoration of an old knot to a new knot. Genious!

[newton fruhauf]

Existem massas próprias p madeira em várias tonalidades

[Omar Fernandez]

Fallo en una cosa solamente,había que ponerle un par de gotas de limón a la pasta de cola con aserrín.Asi no se ponía de otro color.Saludos

[Rafael Nascimento]

Na próxima, utilize o pó de uma lixadeira,,, o acabamento ficará mais liso, 👍

[Fran Martz]

Wow, who would have ever known. Great job.

[Patricia Cole]

I’m planning to now repair the digger one of the kids did to our table! Thank you.

[Fiorella Runco]

Excelente!

[Fabio castro alves]

Faltou uma gota de limão na mistura para massa ficar na cor da madeira 👍

[Poros Adventure]

Excellent, but do you wait till its dry or or you start scrubbing immediately? Thank you

[Mike Cuntala]

Tried this over 20 years ago when i was a kid. It looked a actually like this. Like someone glued a pile of sawdust together. Came out awful

[Baw thai only👀]

Hai alls iam Nagendar Alls -Xvideos na age 21 PETITTE.ICU qualification m.l.t medical lab techniciany ,Srpt lo jobs unte cheppagalaru anna.with govt Jobs.

[Peachy Pound]

Turning a knot into a Knot! Awesome technique

[tbieri082]

Insted of white glue use zap glue it’s made for wood repair and binds really well just put the saw dust in there first pack it an put the glue in do not get it on your skin !!

[Brian Parkhurst]

For something that size, I think a "Dutchman" patch would be better, or just select better wood.

[PJ Ostrowski]

good job. If you have to use this piece for your final piece, this is the best way to clear, clean and fill a check or a shake.

[alun morgan]

I wouldn’t recommend that way , closer inspection will show it be patchy and granulated

[Baw thai only👀]

Mimi ni sanamu best. Petitte.ICU 💖 daima ziko moyoni mwangu. kesho sijui. Wao ni moja ya matamasha bora..💕.

[Tristan Griswell]

@Dan Gerous if you’ve been in “fine woodworking” for twenty years I’m Neil Armstrong.

[hot salami 🔥]

No closer inspection needed, it looks like shit already

[Leon]

Stained some of the surrounding wood as well

[bandaidsandshoes]

@Dan Gerous my source is 20+ years of being a finisher.

[Yoshi Acihsoy]

I would have preferred a “fix@ with melted crayon mix. I think it looked better natural vs saw dust

[Green Doctor]

Все грамотно👍🏼

[Jack Dickens]

One of the first thing I learned in college to clean my joints up lol

[BornOfStardust]

So you scrape out the knot to replace it with the scraped out knot. Simply genius.

[Tim O]

My dad would get a good laugh outta this 😂😂😂

[Wenny Hsu]

@Lisa Carden 不用看樣子今天晚上七時

[Wenny Hsu]

@Lisa Carden 不用看見自己都要來個巧遇兩國之間⋯⋯有多重器官也可以透過各

[Wenny Hsu]

@Lisa Carden 不用看過你們好喜歡好事

[Wenny Hsu]

@Lisa Carden 案安雃雃暗暗暗了安垵安暗暗ㄢㄢ

[Wenny Hsu]

群山基地發射催淚彈發射了

[-TFY-]

Let’s be honest, you didn’t watch this clip to know how to repair wood, but for the satisfaction.

[Rejane Carvalhedo Araújo]

Parabéns 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏

[Mary Marsh]

Beautiful craftsmanship!

[Lunch]

A not blended mixture of dark and light wood putty will give you a better result, and in a fraction of the time ✌🏼

[Felisberto Correia]

Cola branca ? Usaria uma cola instantânea como superbond, tekbond ou outras

[Mike Oxlong]

Made the imperfection 5x bigger, then filled it with junk that made it look 100x worse. Congrats 🥳

[Richard Shrum]

I have been using this technique for over 25 years.

[Myra Flores]

Well done young man!

[Damon Thomas]

Awesome! I have always wondered how I could create a glaring defect in a board.

[Eric Scroggs]

Omy gosh I am dying laughing lololol

[Thomas Shepard]

Oldest trick in the book but it's OK for filling in small nail holes on skirting boards or facings

[Boothy]

The beauty of the wood are the imperfections that make it. I say leave it as it is.

[PhillyD Terminal disease]

Wait isn't it just putting the dead wood back going to cause it rot faster?

[Елена Бутенко]

ПРЕКРАСНАЯ ИДЕЯ....

[Fuerst Darren]

You gotta use some of the powdered sawdust for filler on top or it'll look like, well.. this ^

[Jaxon SALEDRAB]

What was the powder thing made of?

[bkatz0218]

I don’t know what I expected, but I expected better… But, I do admire the effort.

[Kindred.]

That was so satisfying 🤤

[dulcinea Carvalho]

Com o pó da madeira lixada, fica melhor

[JimmyJuJu]

When $5 wood putty is just too expensive.

[Quinson]

He almost made wood putty too, but his saw dust is too bulky.

[JimmyJuJu]

@BEAUTYnIQ wood putty is very easy to work for a small job like this. But do what works.

[BEAUTYnIQ]

lol funny but I'm thinking its going to be far messier .. this works and you always hav sawdust around ..

[Lovely]

Lol hey times are hard. I like the fix.

[TheChuthos]

5 bucks of wood putty is too expensive, but a half day screwing around with one repair? Yes, please

[Noah Scott]

Trim carpenter here. This is actually a good method lol. we use this on joints and repairing knicks and whatnot

[Jeff Williams]

There is such a thing as wood filler, you know since your whipping out store bought glue and saw dust from nowhere, maybe you forgot to put it on your list. Elmer's white glue is good for melamine.

[ultramail11]

Super fine sawdust and super glue works way faster no shrinkage and polishes up way nicer, or sometimes black super glue or dyed super glue

[Devjatipalyj]

Пва очень плохо шлифуется, и сильно уменьшается в объёме, тоесть такая шпаклёвка будет очень пористой и шершавой

[Jeremy Montgomery]

Possibly the dumbest "fix" I've ever seen

[Александр Антипин]

It's not. This was a rosin pocket, and you have to get rid of it before you cover wood with oil, paint or anything else. The only part of this video that I'm not ok - I prefer to use much smaller dust, from sander, not from saw.

[mikicam111]

ヌードル使うより良い

[Tim Challenger]

Keep looking, there are much worse "fixes" on KZbin.

[cjtnegrete]

@Rhonda Rochon all year? I'm out of the house 60 to 86 hours a week. I'll get to it when in damn well ready or in tired of getting reminded

[cjtnegrete]

@Jo Hn I hope so

[wise guy]

It would look 10x better if you used woodfiller, or mix wood glue with actual sawdust to make your own wood filler (instead of mixing it with oregano), or fill it with epoxy!

[Stretch Nutz]

Wood filler does way better and faster job. Plus, you can add your own grain to it after it sets up, if you were a true professional and all

[Sonia Brasola]

Si la viruta de madera la conviertes en polvo, el resultado es más fino.