How to Write APDL Script for Cantilever Beam FE Analysis, Part-1

[@vinaypratapsingh6223]

You have a good knowledge 👌

[@graspengineering9249]

Thank you !

[@MrUlhasan]

Thank you very much for this very useful video. Please keep uploading such kind of videos.

[@graspengineering9249]

Thank you!

[@MrUlhasan]

Have you uploaded any video of importing 3D cad geometry in APDL and perform analysis and using macros? Thanks

[@graspengineering9249]

We have few video on APDL analysis through GUI. We will cover furthermore through APDL Script.

[@sengarics]

Hi, where is the part 2 of this video. Can you please share the link here?

[@graspengineering9249]

Will upload soon;

[@shashichichkhede7189]

hello if I want to convert same model (of cantilever beam) into rotating cantilever beam. what will be the process? Can u help me will this?

[@graspengineering9249]

In order to see the effect of rotation on this model, you need to apply torque (moment).

[@shashichichkhede7189]

@@graspengineering9249 yes but what will be the boundary condition at the fixed end in case of rotating condition. If we apply all constraint at fixed end then it will not give proper results

[@ateflaiche4436]

Hi dear, i have building a wing structure and i want to extract mass and striffness Matrix from Ansys APDL to MATLAB any help please

[@graspengineering9249]

Hello, I think there is no direct link to input ANSYS output in Matlab. You can check ANSYS output file where you will find mass details and entre manually in Matlab. We have not tried this, we will check if any other alternative or extension can help to do so.

[@ateflaiche4436]

​@@graspengineering9249 Hi again, sorry about my late answer! i did not clarify my question !! So, i have building a wing structure , i want to Import data (Mass and Stiffness matrices) into Simscape Multibody. You will find out of this link : www.mathworks.com/matlabcentral/fileexchange/47051-flexible-body-models-in-simscape-multibody all what i want to do ( i work with Finite Element Import beam ( in my case a wing)), help me please: 1- Create FE model in FEA software ( is done) 2- Define part interface (is done) 3- Extract reduced order model ????? 4- Import data into Simscape Multibody ???? 5- Connect joints, forces, etc. ???? 6- Simulate ????

[@kostyatikh3582]

Huge thank you!!!

[@graspengineering9249]

Welcome!

[@kashyappadiya1476]

Yaaee thank you very much.

[@graspengineering9249]

Welcome!

[@ГассанАлавад]

Thanks a lot)

[@graspengineering9249]

Welcome

[@MrLO9S]

@@graspengineering9249 very good work I wish you very good continuation

[@graspengineering9249]

@@MrLO9S Sure, Thanks !