How To Zero Gap Babyliss Pro Gold FX Liners

Steps:
1. Put Zero gapping tool onto liners.
2. Loosen black screws with screwdriver that came with the zero gapping tool.
3. Slide black blades down.
4. Place blades face down on flat surface.
5. Push red zero gapping tool down until black blades touch the table.
6. Tilt liners down until they touch the table, and push the blades lightly so that the black blades DO NOT OVERLAP the gold blades.
7. Tighten screws.
8. Remove zero gapping tool.
MAKE SURE THAT BLACK BLADES DO NOT OVERLAP THE GOLD BLADES. This will cause you to cut yourself!!!

[@Gdwar100]

first guy that didnt have a 7 minute intro and a trash guide. props my guy

[@rambo4626]

Finally someone who went straight to the point and made it clear and simple

[@M4ysFu]

If I had a dollar for every time I heard that…. I’d still be broke 😂😂

[@claudlouis1502]

Word

[@Cobratruth]

Longer video, more money. That’s why KZbinrs stretch vids and don’t get the point til later

[@fitnessandfades84]

What a minuttteeeee!!!! You mean to tell me someone really gave a step by step tutorial without talking about a bunch of stuff that I don’t need to hear??!!! Great job getting straight to the point and showing how to do it. Video saved!

[@jesusandrade4955]

Tried your technique. I’m not a barber just bought them to keep up my lineup. I was able to zero gap by following your instructions.

[@amethystaries8140]

Man you went straight to the point, no bs. There are barbers out there who wouldn't tell you how to do this.

[@EbonyPope]

Thanks for being straight forward and not first telling us how your day went or some other stuff. More KZbinrs should follow your example.

[@roo4051]

😂😂

[@illmaticJJ]

Simple but genius, appreciate you a ton for this one bro. These FX trimmers are no joke if there’s some overlap, been cutting the shit out of my head for weeks. 😂🤦🏽‍♂️

[@Enoch000]

overlap on any trimmer will cut cho azz up lol

[@360silk]

I had to readjust mines cause I got em too close, was slicing my head up😂

[@myfaaammilly1607]

Lol

[@marquiesebannister4649]

@illmaticJJ You ain’t lying bro 😂😂

[@blackklash]

Man I just started getting good at cutting my hair. I got depressed the other day. Change the blade. Left a little bit of gold showing and then it wasn't really cutting... Left just a tiny bit of gold showing. Thought that was good enough. I got a nice line of outlining blood. I look crazy the next morning.. I'mma have to get this tool. You can kill somebody with these blades if you want... But I've been cutting with the original blade for like 3 years off and on even before I changed it still was getting a decent line but I could tell it was time. Thanks for the advice

[@black-dot-life]

I'm going to try your method. You got right to the point. Excellent tutorial.

[@360silk]

Glad I could help

[@kcdash8274]

Omg! What a difference! Thanks my brother!! Straight to the point!!

[@MMALifestyle1972]

I'm not going to lie for me I feel like the clippers already sharp enough to where they give you a crispy lineup even without zero gaping but I'm glad this video exists.

[@SincerelyTerry]

Thanks bro. I was dead azz about to return these because they were NOT hitting. You got me right with this one!

[@360silk]

💪🏾💯

[@amethystaries8140]

I just got these a little over a week ago but just recently got to use them and the outline wasn't sharp looking. It looks like they are already zero gapped out the box but I know they're not cause they're not hitting. Gonna mess with the tool a bit and adjust them see if they hit.

[@ethanalvin]

@@amethystaries8140did they hit?

[@tylermcgill2733]

Very good, my wife just bought this for my for my birthday day. I was wonder what that was for. Yes thanks man

[@mohammadmoghadam1]

Thanks for clear video

[@AlexC-di6pe]

Appreciate this video brotha I just learned something new

[@360silk]

💯💯

[@davidaofia8481]

Straight to the point💯 my guy

[@jlafores]

This was so helpful! Thanks bro! 👏🏽

[@Stradagee]

Thank you so much bro! I needed this video. My shawty just got me the multicolored set. Hug & kiss mom! She's the real MVP

[@seanthebarber10]

Thank you for this, just got the snaps and couldn’t figure out how to use the gapper for the life of me…maybe I should just read the manual but nah this video helped me out fr🔥🙏

[@jicavlogs5152]

Nice video thanks. Instead of slide the blade, just remove the magnetic cover. Awesome video❤❤

[@Maxaamed]

Didn’t waste no time I love it

[@SubdolphinX]

Thank you for this video. It helped me out a lot!

[@tutholebicker-_-7905]

i need help with mine i did all the steps, but when i turn it on, the right side of the blade is loose, even though i tightened it up the lil screws

[@anthonyhuerta188]

The reaction is dope !! 🎉

[@J3LVN1]

Great vid bro, straight to the point

[@ricardometivier822]

Bro my reactions was just like that when my wife got me the babyliss snap fx clippers for Xmas 🎉

[@hyghsociety2788]

I appreciate it I literally just got these out of the box

[@fernandofernando4364]

Thanks for the instructions. Wasn’t very clear with the directions it came with. Appreciate it.

[@brentfisher6478]

Now this is an instructional video

[@louiealouie]

This was a great explanation my mans. Ty. Where you got the zero gap tool?

[@360silk]

It came with the clippers

[@Texas.Shave96]

Thank you

[@davidf.3916]

I have a couple different babyliss trimmers that I can’t get right. Imma try your technique and see what happens. 🤞🏼

[@funkeoyefeso]

thank you, straight to point

[@jeanjosephbourge9416]

Hello thank you for this video, I wanted to know, original without adjustment this tensioner is how many millimeters? without adjustment how many millimeters

[@dbi1036]

Bro your the pro, thanks

[@joshthompson2337]

My gold fx trimmers are loud asf. Any suggestions besides changing the blade??

[@SargeDaBarber]

Appreciate the video fam. 🙏🏻💈

[@kendawg8029]

Where could I grab this zero gap tool? I been looking everywhere!

[@jordankuhar4797]

I am trying this on mine and i cannot seem to get them to zero… mine are stuck or something? I cannot come cutting myself from overlap because i think mine have an issue

[@djkly1]

tried this but after I turn them on & back off, the left side seems to rise a bit over

[@samxday]

Great. Thank you

[@dodoz44]

Just got mine, the gapping tool wasn't there though. Hope it's set up fine out of the box... Just compared the contents of what's supposed to come with it vs what I got... So instead of a gapping tool, I got an extra lubricating oil 🤣

[@ajmcknight86]

What is the name of that tool? I'm trying to purchase another one.

[@hapticgaming]

You cal also remove the whole blade and forget about sliding left and right to reach the screws

[@smoked_scatpack6880]

Where can i get that tool from?

[@RandomMotoThings]

Came with the trimmers

[@ebergutierrez4994]

Thanks ❤

[@itscalebgreen]

Mine don’t even have the screw driver smh, I looked everywhere e

[@xxkingxdijonxx8118]

When you buy the outliner trimmer not the clipper do you have to adjust the blades if so how close?

[@DonsaiRoadsOfficial]

My screw stripped the second i turned it and now i can't adjust at all

[@meancheeto]

Did you fix it

[@Chicagomadeshortty]

Same bro

[@desmondmitchell5602]

​@@Chicagomadeshorttysent it back they have a 2 year warranty

[@desmondmitchell5602]

Send it back they have a 2 year warranty.. the customer service number is in the owners manual

[@Osa4500]

Im trying to learn how to cut my own hair can u help out bruh

[@360silk]

Yea I have plenty of tutorial videos on my KZbin and Instagram @360silk

[@bruce9897]

Good looking out

[@jamichaelgipson7658]

Where can I find the tool adjuster at? What's the name of it?

[@user-ne8vf4sd5v]

Mine keep turning off & on in the on position. What is the solution?

[@Enoch000]

use the warranty

[@NotedPine]

W moms ❤

[@schoolboy405]

How far should the gold be from the black?

[@adrianguapp]

It’s so hard to tell with the black fx 😂

[@MD_-ub8rx]

Mine charge with a red flashing light. Does that mean mine are fake?

[@Shqipe040]

Bro, whats the diffrence between a SkeletonFX DLC TITANIUM 1.6 and a 2.0 blade. Im confused on al the babyliss videos i see a 2.0 blade meanwhile mine has a SKELETONFX DLC TITANIUM 1.6 blade on it out the box. And i feel like mine hit terrible not like on the videos

[@LawlessRaafay]

Do we have to make it 0 for shaving?

[@babyock3485]

Where do i get that screw ?

[@johnsonle13]

Bruh what screwdriver do I use

[@shooz4unme]

The tool can be bought separately? Have u tried zero gapping other of your clippers with it?

[@shooz4unme]

Yes he can help you with that! He has videos on IG n KZbin. I learned to self cut from his videos.

[@360silk]

The tool comes with the liners✅. It’s made for these liners so I dont think it will work for other brands of liners

[@TheMaxLife.]

@@360silk by any chance do you know where I can buy the tool

[@kameishagreenunapologetica8210]

@@TheMaxLife.have you found the tool?

[@gabrieljamesvlogs]

My trimmers get hot in like 1min and I oiled them too…

[@xt0huxxh03tax9]

Word bruv str8 to the point no fuck around like these other youtubers lol

[@popcornplaya83ify]

👍🏾👍🏾

[@official.andrewww147]

This helped thanks 🙏🏼

[@nnnnn2386]

thank you

[@heriel201]

Where can I get that tool??