How will a Vortex help your machines performance?

Let’s see what a bone stock YFZ450R has in HP and TQ. Then we’ll be showing you how to properly install a Vortex and explain what the dials do and how it will effect your machine. Lastly, a couple Dyno runs showing how the Vortex with a couple adjustments can improve your HP and TQ.
#sarmientomotorsports #mattsarmiento #vortex #dynotuning #vortextuning#atvmotocross #yamaha #yamahayfz450r #yfz450r #atv #quadbuild #atvbuild #tips #techtip #motocross

[@chriscallas9483]

Great video with a lot of info. Not many guys w knowledge about the Vortex share it. Especially guys w dyno's. Thanks!

[@andysherman9336]

Honestly your videos are the most thorough I’ve seen on installs. Appreciate the time you take to explain everything, it’s super helpful. Have a 2019 YFZ 450r and just picked up a Rossier R5, Vortex, FCI intake, 38 Motorsport breather and ASI delete, and a Precision Racing steering stabilizer. Would love to see a steering stabilizer install video if you ever install one.

[@sarmientomotorsports910]

Thanks man! Glad to hear you are learning air from my videos! I’ll be doing a Precision Stabilizer here soon. Keep an eye out for it.

[@cristhian_moronta33]

You can tune the original comouter is better than vortex

[@francescoprezzano3161]

awesome video man! i got a 2014 yfz450r with fmf exhuast and filter with air box lid off. what map and settings should i be at? trying to avoid spending the extra money to bring it a dyno since i’m not a racer just a weekend rider! Thanks

[@brianrzewnicki6962]

Thanks for the video....what size bolts and what length bolts did you use to install the vortex back onto the bike?

[@dylanwilliams4612]

What is the best map for a Empire exhaust, FCI intake for the vortex ecu

[@paulhood7373]

So on a stock Yfz450r what is the best setting on the Vortex. I should have my Vortex next week.

[@Sloluxx]

what settings would you recommend for a stock intake and stock exhaust bike without being able to dyno tune

[@ptshyu2]

Can more than one person tune the vortex? I’ve been told that it can only connect to the original laptop that tuned it

[@nickkompinski3390]

Hey brother your videos have helped soo much! I know your in Fl hope you faired well with the storm. I’m in Naples and thank you. Question: did the full RP Racing kit with throttle body. It’s saying with the TPS sensor Dino is needed to get the TPS to 0?

[@sarmientomotorsports910]

Thank you! We did good in the hurricane. Hope you did as well. You have to calibrate the TPS. I always do it when I dyno tune. When I flash tune, if the machine is here with me I also make sure the calibration is up to pare. If you’d like to schedule dyno tuning or a flash tune let us know!

[@huntersimmons2066]

Do you have a link for the bracket for the vortex ecu?

[@joshuavigil3889]

Hey man great videos so I just ordered the vortex I have full fmf exhaust and FCI any suggestions on what map I should start with where I live we have no Dyno tuners

[@Fox250R]

My 14 YFZR sounds like it’s pretty close to yours and I ran map9 7low 7 mid 2 high

[@stepheneaton2493]

I have a rp racing exhaust with the rp intake with an ais delete kit and my motor is stock I just don’t know what type of tune is needed I have the vortex set to 1 because it is a stock engine I just don’t know where the low mid and high need to be at

[@faisalalsubaie6166]

I only use my yfz450 in dunes and I installed a full exhaust which cause my bike overheating quickly and loss of power in low speed. However just bought vortex after i watched your video. Do you recommend any mapping for me ?

[@AK-hv6wv]

5 كامل

[@AYE_TEV]

Next, let’s get an exhaust shoot out!

[@sarmientomotorsports910]

It’s coming! Just waiting an a few things to arrive!

[@martinalamurov6740]

@@sarmientomotorsports910 ,please make video like this with the performance parts ,some dyno runs and adjustments

[@sarmientomotorsports910]

@@martinalamurov6740 stay tuned! It’s coming

[@kennyopr]

Hello! New YFZ owner and just got my ECU today! Super excited! I have an all stock YFZ and it is running a little lean. Hence the Vortex came in. What are the best settings for my stock YFZ? I just wanted it to run right. No mods or anything as of today.

[@kennyopr]

Literally just healthy! I also use 93 gas

[@sarmientomotorsports910]

Map 1, all 1’s or you can try Map 1, all 3’s

[@sarmientomotorsports910]

And congratulations on your new YFZ! You’re going to love it

[@josevalentin1992]

Vortex doesn't come with software to download to laptop?

[@johncay6636]

Know any tuners up on the north east just grabbed a 2016 450r exhaust intake and the vortex

[@sarmientomotorsports910]

I don’t, but you can send your vortex in to us and I can flash tune it for you! If you’d like more info send me a message on FB.

[@bryant09john]

​@@sarmientomotorsports910 hey how much to tune my vortex

[@sarmientomotorsports910]

@@bryant09john Send me a message on FB and we can discuss price.

[@coledavis4250]

I have a vortex ECU and every time I put the bike in gear and let the clutch out, the check engine light comes on. Squeeze the clutch it cuts off.

[@aminelahlou6180]

hi, please what does « DRI » motor and pipe mean?

[@om_bikelife8082]

Bro i have 450se 2016 rp race intake + big gun full exhaust what is recommended map ? In vortex

[@sarmientomotorsports910]

Highly recommend sending it in for remapping (which we do). The factory maps are just base maps. RP wasn’t around when they made those base maps. Hit us up on IG or FB if you’d like to send it in.

[@luchob795]

Hello Matt, i have a 2018 yfz450r se with a Dasa shorty full system, FCI with box 38 motorsports ais delete and breather and the vortex x10. Whats is a starting setup for florida? The engine is stock and healthy

[@jamesrobinson4365]

Got the same setup today bro. What map setup do you run

[@toxicmurdererr7597]

How are the ones for the raptor? Someone recommended going with a pc5 as it’s vortex is more for 450(even though they made one for rappys???)

[@nicklarkin6093]

The vortex is the best thing for raptor or 450. Pc5 will work but the tunning capabilities are nothing compared to what you get from the vortex

[@sarmientomotorsports910]

I agree with what Nick said! They have the Vortex available now for the Raptor and that’s what I highly recommend for it.

[@nicklarkin6093]

@@sarmientomotorsports910 your one of the many pros that i like watching… your videos help a bunch. Thank you Matt

[@sarmientomotorsports910]

@@nicklarkin6093 thanks man! I’m glad these videos are helping! I want to help all in the motocross community.

[@ghettohey2388]

Question. Do you know what all the dual injector setup includes for the yfz450r. I know it involves a ktm throttle body but dont know which one. I also know it envolves a vortex tuner and it needs a different harness but thats all I know. Can you help with any info that you might know of

[@sarmientomotorsports910]

I don't run the dual injection system due to a high failure rate. I stopped looking into it 3 years ago.

[@centralfloridalawncare8373]

I live in Florida is rhere anyway i could pay you to dyno tume my 450??

[@matthewbajo3557]

I have a msd fuel control and it sucks ass imma get a fci and a vortex ecu then imma take it to the dyno

[@dylanwilliams4612]

But which one is better a Dyno Jet Power Commander 5 or Vortex

[@sarmientomotorsports910]

The best one is Vortex

[@garysweat9523]

What part of Florida you live in

[@Fox250R]

Well I have a vortex and my exhaust still glows a little bit.

[@thatyfz33]

hey man i just got a 2020 yfz 450r se and....i have been hearing that the clutch baskets explode im going to be racing my machine but nothing crazy like a gncc should i be fine for at least this season?

[@sarmientomotorsports910]

If you’re hard on the clutch I’d be a little concerned. But if you’re easy and smooth on it then you should be fine. I highly recommend changing it to a Hinson H313 Basket or a 2009-2013 OEM basket.

[@thatyfz33]

@@sarmientomotorsports910 what about the BNR upgraded?

[@sarmientomotorsports910]

@@thatyfz33 bnr has a kit/parts put together for a customer in one box. I setup a lot of custom kits for a lot of my customers. Something easy to drop in with a the needed parts

[@harleycarter3982]

Man I wish you were in ga

[@sarmientomotorsports910]

I’m not far though, make a weekend out of it and come on down to Florida man!

[@garysweat9523]

What part of Florida r you form

[@yakimamotosquad7721]

You lost me when you said it’s easier to strap down without nerf bars…. Just strap to the nerf bar hellllllloooooo!!!!!

[@vintagetrikesandquads4012]

I would like to have seen dyno runs without the airbox lid and the peashooter removed.