How to Clean a Tumble Dryer Condenser Box Unit, Saves Drying Time & Money!

[@MattM310]

Quick question. Noticed recently a funky smell on clothes after they've dried in our condenser dryer. Been about a month and a half since I last cleaned out the condenser so I took it out, and washed out all the fluff (there was quite a lot it was pretty caked) and the back part of the condenser that sits inside the machine had the smell I've been smelling but about 5x stronger. Is this entirely just because it's been blocked and caked with old lint for a long time, and it's had poor airflow due to it so the smell has been transferring back into the clothes?

[@patrickbonner4841]

Mr Washy Washy recons the LG Signature is best washer ever made ....? Couple of days old video , Australian video ?

[@panant6573]

Congratulations, very good job Do you have any video for the bosch WAP20321IT/01 Avantixx 9. I want to change shock absorber. Thank you very much.

[@DisneyMarkUK]

Hi there. My Beko one doesn’t come out, is this normal? Thanks

[@cabahuggerlie8479]

Hi sir I ask you why my tumble dyer is liking the water, the water is not going up in the box

[@waynesalekin4737]

Excellent video. Thank you very much!

[@How-to-repair]

Hi mate, thanks a lot for your comment. All I'm trying to do is teach in the correct way that everyone understands. It would be really helpful for me to either share the channel or at least post it to your friends. We also appreciate a beer after a hard day of creating free appliance repair guides in our warehouse, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Also don't forget to subscribe to our channel, as that really helps us. Thanks, Paul 👍

[@thisnthat6972]

I had clothes coming out hot and steaming wet so had an engineer come out who replaced the condenser for a new one the problem is still there, he has checked all the sensors and fans and they all seem fine, the previous condenser was very bad clogged which I cleaned out exactly like this video shows and when the engineer came out initially he said the condenser was very clean but still replaced it as he could only put it down to this but like I say it’s still same issue also the cycle cuts itself short any ideas

[@How-to-repair]

Hi, I will need the full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well. We will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍

[@MrToymod]

What happens when you can’t remove the condenser?.

[@LordBonesaw]

Problem is these days the lazy people don’t look after there appliances and then wonder why they aren’t working efficiently but always blame others when it’s there laziness to clean things

[@How-to-repair]

I can't agree enough. I see so many appliances on the scrape because of the simplest defaults not even needing any money thrown at it blockages in pipes filters elastic bands round pumps so many common faults that could've been rectified with the simplest of maintenance. What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be KZbin superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @LordBonesaw please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@salparadise1220]

I’ve worked in IT in the past. I’ve seen people with MacBook Pros that look like they’ve been used as dinner plates. Not even enough care to keep the outside clean. Planet Slob.