Arduino Color Sorter Project

[@AliKaya-cr1kj]

Hello sir, I want to express my thanks and gratitude to you, because this project was my graduation project at the university and I succeeded in making it just like you. After submitting it I took an A in the lesson on this project. Thank you again

[@shashankphansikar7094]

hey did you follow this video only, or was it a different video ? did you refer to the circuit diagram shown here ? because I found different circuit diagrams for this.. please reply.

[@AliKaya-cr1kj]

@@shashankphansikar7094 I just watched this video and applied everything and my project was a great success

[@KamranKhan-qo3vy]

bro plz help one servo is not working why

[@bhaskarambgowda6898]

Bro bottom servo is not working please help me

[@jonathanpineda1374]

Por si alguno tiene duda de las dimensiones, las medidas están en mm, ya lo comprobé, en la parte del video donde muestra las piezas con sus medidas, hay una medida seleccionada y al lado derecho inferior, pone en mm

[@juliogalonsoreyes241]

tienes los planos?

[@cristofer6887]

Gracias bro

[@Haza3137]

Wowwwww u sir are amazing ...I wanna start focusing a lot on arduino projects because of you . You explain things very well

[@Isotope1213]

I agree. hes the best

[@emmaemma6397]

I am a novice on arduino .your explanation make it easy for me to follow thanks

[@udeshwarsinghsandhu2576]

I love the project but quick question, when making the if statements for deciding the colour, why do you only use 2 colours at once?

[@millplays]

You inspire me to study arduino and learn more. Your projects/videos are amazing! :)

[@l31mayur10]

Which aurdino is used

[@krayon70]

Hi, Thanks for the tutorial. How do you power the arduino ? The power supply should not be plugged into the VIN rather than the 5V ? Regards

[@rakahamdi9268]

thanks sir, because of you, i can finished the final project in college

[@souravghosh8642]

Is everything running well?

[@miguelvadillo2]

You are amazing Dejan. Congratulations. Thank you very much.

[@sizwephia1846]

great work and encouraging, how did you managed to do the measurements for housing and how is your power supply designed

[@arduferth]

IT IS A GREAT PROJECT, COULD YOU HELP ME WITH THE CODE; THE LOWER ARM OF THE MACHINE IS NOT WORKING, PLEASE HELP

[@g-tron8557]

Tienes que ajustar la variable en el código Arduino con ayuda del monitor en serie para que tú sensor reconozca los colores

[@elzeardbouffier2904]

How are you able to dispense one skittle at a time? Awesome design by the way.

[@rafael4433]

Very very good, thank you very much. This project do work perfectly

[@hiingrusell4332]

Can I use this project to sorting the black pepper and white pepper?

[@MirkoPavleskiMK]

Wow , excellent project. Simple and functional. Congraculations

[@itachi284]

it is not simple there is so many probleme

[@nikhildewitt2549]

Hello, I am planning to do a science fair project utilizing a color sensor to determine if a fruit is ripe or not. What type of code would I use to determine if the color is closer to one color or another?

[@MsEDUARDOCR7]

Thank you for the video! I am wondered with this project. Could you make videos about Automatic Control Engineering? I think this is an interesting topic.

[@MsEDUARDOCR7]

Maybe control the speed of a DC motor or the position of a pendulum. I share you this webpage.

[@MsEDUARDOCR7]

In the section "Hardware" there are inetresting projects.

[@MsEDUARDOCR7]

OK,Thank you.

[@EasyHomeMadeProjects]

Awesome Project!

[@jiysea]

Does it also work without the power adapter and switch but only through USB to computer?

[@luismiranda5796]

* Good morning, how do you recognize the violet color on the color sensor? Also, how could you put the recognition of a color that resembles white?

[@lightman500]

Thanks for the tutorial... I plan to make one. I went to your website and downloaded the PDF drawing file but noticed it does not include the ramp (lower servo distribution ramp). I sure I can make one to fit my needs, but did I miss the download for the second page?

[@athulakulasinghe1957]

Hi, what servo motars are you using

[@timeforskipper2121]

WE have to make this for a School project, my teacher gave us link to this video :)

[@HowToMechatronics]

That's cool, have fun building it! :)

[@itachi284]

there is problem you have to tell us that our color we use not like your color

[@bhaskarambgowda6898]

@@HowToMechatronics sir bottom servo is not working please help me sir what is the problem sir

[@lpodverde]

Hi, can this be modified to take already sorted beads and arrange them in a certain color order, for example: 2 green, 1 yellow, 3 red etc?

[@Giantmethod]

Well this video is great, just wondering if there's a code for just black and white?

[@smartinamharic8822]

can you try it in single servo

[@petiovelev97]

Hello, Can I replace the sensor with an arduino camera like OV7670 VGA camera? Should I use the same modules if i use an arduino camera? My idea is: the camera will take a picture of the object, then it will take a histogram of the picture or another process which takes the color of the object and recognize the color of the object. Everything is the same in process but I only want to change the sensor with camera.

[@alinebouvier2252]

Est-ce que la vitesse des servomoteurs est réelle ou alors est-ce que la vidéo est accélérée?

[@RangavittalaSR]

very nice sir, explained well, thanks a lot, u r a motivator

[@hiramsinaimoralesbenitez4451]

I have one cuestion, whay servomotor Bottom not a work?

[@facundodariohoyos9835]

el lifehack mas grande de la historia. gracias por tu vidio

[@rendyyt2268]

What is the voltage and ampere are used?

[@thesaad3140]

Sir how did u cut the fibre board

[@pranavjain7822]

hey i need to know that how did you make the moving skittles , i.e which command or what did you used in solidworks that skittles also move and retain in the position of the slider ,pipe , sorter and finally gets into its respective box ? how did you do that in solidworks?

[@hussamahmed1855]

Can I use a camera to control motors instead of color sensitive?

[@MADHAYTEX]

what is the dimension of the fibre board for laser cut

[@deathlyhallows04]

What software did you use? cool project.

[@bahadrsivasl114]

looking cool, i want to try this, thank you..

[@howto3d850]

Very well explained! I'm gonna try to build a similar device. Is it possible to switch the top servo with a stepper motor for continious single direction motion using the same schematic wiring setup? (like a small 28BYJ-48 5vdc stepper motor) I'm guessing this would draw to much power...

[@luismiranda5796]

Good morning, how could you recognize the purple color on the color sensor?

[@rendyyt2268]

Did he use same power supply for servo and arduino?

[@nikamintv8797]

how to make the design in simulator....what app that u used sir

[@sourabhdayananda799]

Where did u do the electrical stimulation

[@bettymartinez8824]

Hi. I am trying to do it, but I have a lot of problems. I am using the sensor tcs 230 and yours is 3200. could you tell me what is happening? or cuould you tell me what can I do? please

[@brunithop]

hey, sir. I don't recognized very well the component that is conected at first, previous the switch bottom. ¿Can you tell me what's that? I think that is a component to regulate the electricity to don't damage the arduino, and is a USB port. ¿is it correct?

[@christinebalasabas]

Hello how do you build a faster sorter?

uy buenos proyectos, Gracias por compartir.

[@tankalvin1444]

very cool! how about sorting by weight or size?

[@govindathapa6382]

its really intersting..thanks for the video.would be looking for a Project with a arduino quadcopter

[@govindathapa6382]

Hello sir....could u please make a tutorial for Decawave with arduino for distance mesurement....it qould be very grateful

[@abhishekhavanur9859]

Thank u so much for this project sir

[@dirilismak]

How do we calibrate the values ​​from 0-255 according to the strand color values?

[@jiysea]

I have a question, which colors are being included?

[@lucgh2007]

Whats the power jack you used? Because two weeks ago I bought the one you provided on the link, but then you changed it to another one with 3 pins? Why?

[@HowToMechatronics]

Sorry I've updated the post wrongly. I've updated again now. So you need a simple 5.5mm x 2.1mm power jack with two pins, plus and minus.

[@dezolsantillan5898]

what version of solidworks did you use for the simulation?

[@mudasirhussain2784]

sir which type of stepper motors you have used plz repy me if possible

[@user-po5pq2vr4z]

Can u do it with color pencil??

[@krrav]

Wait.. how did the plastic bottle turn into a tube for the charger?

[@asdomega]

krrav cut away the top and bottom from the bottle and you have got a cylinder. slice the cylinder appart and you have a sheet of clear plastic....

[@wasanthawimaladharm]

Use 5cc syringe

[@ddmdavid1]

good project! Where did you buy the fiberboard?

[@ddmdavid1]

thanks, is it easy to break?

[@ddmdavid1]

+Dejan Nedelkovski thanks. I'm having a hard time to find a material to work as a support fot arduino projects

[@maheshambaliya1321]

Please make video on cube solving machine

[@abdellahtahar8720]

Do you using SOLIDWORKS 2016!?

[@sarahershey4433]

Hello, I have put the same code but my color sensor does not blink, it does not turn on its light, what could be the error? Please help

[@yashevalekar7538]

sir im making these sorting machine but im using colour sensor Tcs230 then what change should i do in my ardiuno code?

[@hfp22]

Hello my friend, one more good project. I'll try do it but I'll use M&M

[@rajupolamarasetti8983]

Is we have to install any software in the Arduino ide software It's very urgent please

[@bradcristina6039]

can i ask 1, how about white, what is white RGB

[@satishchauhan4296]

Both the motor s are not working....either of them are not moving ..only L light is blinking on supplying external 9V power. Tried connection on Vin and +5V both the way but nothing worked..pls help

[@mayerf7994]

Hello,what distance i need? I can do it with long dinstance?

[@danielfledersbacher7299]

Can i make that with a bar code scanner?

[@chaitanyashinde9756]

is the programing of your arduino board is same for arduino mega

[@shashankphansikar7094]

what does the comma mean in your dimension sheet

[@harshayeluri5442]

we have done all this but slider is not rotating according to the color of gems..what I have to do now..plz help

[@fathimajezna9702]

ū

[@wasanthawimaladharm]

I have same problem same color skittle send to different pockets at different attempts. Why does it happen like this. (What is the reason for it) and how do you recover it

[@eeeian7843]

I am also having the same problem

[@infinitystem6565]

Man... this is great!

[@lalalagful]

very creative model :D. good job.

[@za1981zee]

really really great, thank you so much sir, I will try this.....

[@mostinwilliams1310]

I have a simple circuit diagram with one servo hooked up to my ESP8266 board power and ground respectively and Signal wire hooked up to D5 and I'm trying to get it communicating with my Arduino software via a micro USB cable, but this is the error I keep getting: espcomm_upload_mem failed

[@ruaaabd1334]

Hello how to design fuzzy logic control color sorting using arduino, I need the program

[@attubbs]

Hi, is not more avaiable to download the project?

[@jovenalpay]

Great Project!!

[@parzival1741]

please share link to create this circuits schematic

[@ananthnishwith3534]

Can tell me about how to give connections

[@wasanthawimaladharm]

same color skittle send to different pockets at different attempts. Why does it happen like this. (What is the reason for it) and how do you recover it

[@saeedzuberi9310]

Can you tell the exact length and breadth of the building in feet ?

[@dirilismak]

How did you determine the RGB values and color contrasts?

[@pame1403]

Dejan Nedelkovski and how to use that values in code, how to determine for orange the values of r,b,g when you got a lot of them with calibration. Thanks!

[@simone.maccari.2005]

Can you do a .gcode file please, i cant print it. Or explain me how i can turn the step file

[@nickysalido6244]

Tried this with arduino uno. But the bottomServo does not work.

[@nickysalido6244]

Nevermind. I saw the comments on your website and saw your comment about redefining the values to match the colors. Thanks! It worked!

[@koyalnarkhede1383]

I neet help as my bottom servo motor is not working can u pls help me?

[@nickysalido6244]

@@koyalnarkhede1383 test the color sensor first and take note of the values it produces whenever you test a certain color.. then change the values of RGB in the last part of the program for each color... the bottom servo will move if it detects a match. what i meant was this part: if(R32 & G55){ color = 1; // Red } if(G43 & B35){ color = 2; // Orange } if(R40 & G40){ color = 3; // Green } if(R24 & G30){ color = 4; // Yellow } if(R46 & G55){ color = 5; // Brown } if (G45 & B26){ color = 6; // Blue }

[@mayerf7994]

Buenas tardes,se podria unir a algun tipo de sensor optico lector de codigo qr?

[@giowisely2284]

Do you have the copy of the sketch sir?

[@gauravmane2847]

I have done what was told in the video, set r,g,b values according to my sensor but the bottom servo is not functioning. Is it because Arduino Uno cannot handle 2 servo and a colour sensor or is it due to my coding mistake. I have Arduino Uno r3. Please help.

[@HowToMechatronics]

It could be that the the Arduino cannot handle 2 servos. Try to use external 5V power supply for the project as shown in the circuit diagram.

[@polamarasettidevprakash9622]

brother where is bread board is used

[@rameshkambar3300]

Hi, Thanks for this wonderful project. I thought of this project, can you please help me build this. I am not from programming background.

[@escuelasdetkdenhonduras2409]

the 115 is a number or specific configuration de the servo motor? How can I find this number?

[@vvillainc]

115 = 115|°

[@BetoDo330]

thanks!! How big is skittle?

[@asdomega]

Roberto Dalmas 9mm hight and 13mm in diameter

[@Cheesblenders4all]

Does this also work for m&ms

[@arduinoprojets4718]

can we use arduino uno instead of arduino nano if it's yes how to connect it thanks

[@bakshishsingh787]

How can we change colours for sorting

[@umerafzal2161]

sir we are using arduino mega 2560. How do i make this code compatible with it??????

[@tsheposibande3030]

Sir I am planning on doing this project for my FYP, can you please help me with the code, measurements, material needed and aprox. Cost of the project

[@benamram9978]

Where can I download this 3 d model plz

[@lojiseleven4603]

Bro accidentally i gave 12 v to nano board...After that any servo motors are not working properly....What's may wrong in this setup...can nano board accept 12 v..

[@HowToMechatronics]

You can use 12 for the Nano but only on pin Vin. The servo motors work on 5v, so you might have fried them when you connected them to the 12V.

[@lojiseleven4603]

@@HowToMechatronics and also with the new setup the 1st servo motor is rotating in opposite side...How to fix this problem.

[@gehadmohsen9946]

are the dimensions of the drawing in mm or cm plz ?