How to Model Complex Building in Rhino

[@HowtoRhino]

Free How to Rhino Community 👉 www.skool.com/howtorhino Rhino for Architects Course ✔ howtorhino.com/course/ Project Files ➟ www.patreon.com/posts/29310050

[@Ar1v]

Hi If i have a concept and my project is kinda complex, do i start with a plan or a 3d first?

[@nikale2092]

Hello mate. Can you please tell me what do you do @8:07 and the lines become smooth? You do it in other occasions too. What do you press?

[@HowtoRhino]

TAB key Nik :)

[@nikale2092]

@@HowtoRhino ty! pls tell those tricks while you work, even if they seem obvious. Not all the time but every now and then

[@HowtoRhino]

@@nikale2092 you're welcome!

[@SoorajIsTheMan]

Hi! I would like to know why you did not use grasshopper to make the glass mesh just like you din with in the gherkin video?

[@HowtoRhino]

These two are not connected, this tutorial was done before Gherkin and was without Grasshopper at all. So ever time, I included some tutorials that have GH components and procedures in them. Definitely easier to create glass mesh with Grasshopper though :D

[@jubo3299]

hey good videos, can i know what is that pink tool u use there

[@HowtoRhino]

Thanks! T-splines plugin. It is outdated and doesn't work any more :) If you want to do something similar, I'd suggest going with SubD tools for Rhino 7 :)

[@moatazmattar4714]

Ur videos are really helpful. Keep it up

[@HowtoRhino]

Hey Moataz! Thanks for the support :) Glad you find them helpful!

[@emmanuelmora4472]

Hello Mr. How can I Change the direction of the Iso Curve. When I run the command _ExtractIsoCurve. It only adds a curve but in Horizontal direction, How can I Change it? 24:50 in your Video. Many Thanks Emmanuel

[@HowtoRhino]

Hey Emmanuel, When you execute the command, press T (for toggle) and this will give you an option to change the direction of the isocurve :) Hope that helps!

[@rahullodha1394]

i am not able to remove creases , it doesnt get curve. Please help me

[@HowtoRhino]

How can I help you Rahul?

[@rahullodha1394]

@@HowtoRhino The remove creases tool in tsplines doesnt work for me sadly Is there anything that I can do to solve that Or an alternative to it ?

[@whale2337]

Thank you, this video do really helps me a lot!

[@HowtoRhino]

You're welcome Wu :D

[@jtanchao]

Thank you very much!

[@HowtoRhino]

You're welcome Jose!

[@matthewmartinkovic6909]

when i make the tspline plane i dont get the cruved corners any idea why?

[@HowtoRhino]

In order to get curved corners, you have to use the command "remove creases" for all vertices in T-splines :)

[@wojciechskrzypek4307]

Please keep up!

[@HowtoRhino]

Thanks Wojciech!

[@darickflicke5126]

What Toolbars are the ones you have active in the video? Those Yellow and Pink Icons

[@HowtoRhino]

Hey Paolo, thanks for your comment! So the pink one is the T-spline toolbar, the yellow ones are Visibility toolbar and Selection toolbar. They come quite in handy sometimes, that's why I like to have them visible. Hope that helps! Cheers :)

[@darickflicke5126]

@@HowtoRhino Might I ask what other plugins you have installed as well? :o

[@HowtoRhino]

T-splines, RhinoNest, Grasshopper, VisArq, SectionTools, Vray

[@kevinhugle307]

@@HowtoRhino T-Splines isn`t available for Rhino 6 anymore. Do you have any recommends which one to use instead?

[@HowtoRhino]

@@kevinhugle307 Yes, if you have Rhino 6 license, you can have access to Rhino 7 WIP version. In that version, you have Sub-D tools which are native Rhino tools that are working the same way as T-splines. However, they are still in development meaning they are not perfect, but you can use them to get the same result as in the tutorial ;)

[@qosaighalyoun9203]

can i have the name of the building you model it ? or the pictures you used it please

[@HowtoRhino]

Hey Qosai, Sure, just shoot me an email at [e-mail]

[@md.shahid2127]

Its very helpful sirr... plz upload video tutorial for begineer

[@HowtoRhino]

Hey Shadhid. Thank you! Glad you find it helpful. There will be information about beginner tutorials on my VIP email list. You can sign up here and you'll get informed once these kind of tutoring is available bit.ly/2Ocx3Pv

[@wgxyz]

Do you know of any replacement for T-Splines? Using Rhino 6. Nice tutorial

[@HowtoRhino]

Thanks Will! Unfortunately, T-splines is not an active plugin for Rhinoceros 6 any more because Autodesk bought this company and now this plugin is implemented in another software called Fusion 360 from Autodesk. However, there is a workaround. The plugin can still be downloaded from here: www.tsplines.com/latest_version/ But again, this is only for Rhino version 5. If you're using Rhino 6, there's a similar plugin called Clayoo from TDM solutions, but it is overpriced in my opinion, but it basically does the same thing as T-splines. There's good news, in the future versions of Rhino, they are planning to implement all this t-splines magic as integrated part of Rhino which will be super awesome :) Hope that helped you out a bit!

[@wgxyz]

Awesome response, thanks so much!

[@HowtoRhino]

You're welcome! :)

[@capitanuvlad2499]

Hy, very good tutorial! where do i find the pictures of the building ?

[@HowtoRhino]

Hi Vlad, thanks! Shoot me an email at [e-mail] and I'll send it to you :)

[@munzerja2145]

hey can I have the building name, please

[@junchenli1383]

There is some problems hapenning when play this video

[@HowtoRhino]

Hi Junchen, Do you still have the problem to play the video? Nobody else had these problems, maybe it has to do something with your internet connection?