Hozelock Connectors and Hose Repair - Everything You Need To Know

[@oobenoob]

I got a bunch of hozelock items to replace my old broken hose. Very impressed. I recommend the ultramax hose if you hate kinks.

[@SimonPeters]

What made you decide to cut to shots of him looking off to his left? Better if he had just turned on the cut to face us.

[@Quebecoisegal]

Hi. Unless I am missing the obvious, hows does the aquastop function stop the water coming out of the faucet?

[@garden4less]

Hi, there is a valve in the aquastop connectors that is not in normal ones so when you push it down to disconnect an accessory and attach a new one, it temporarily stops the water flowing through it. Hope this helps!

[@Quebecoisegal]

@@garden4less Yes, thank you for your reply.

[@andrewcorrie8936]

Mainly, it stops water coming out from the end of the hose; but it doesn't stop the water at the tap - that just leaks everywhere from all the other connections.

[@casper1240]

Hi i have a 2 year old hozelock sprinkler just turned it on now but it/s not turning the one with a Spike in it . thanks

[@Jenwaaaa1]

How do I remove the attachment from the outdoor tap? It's not coming off....

[@garden4less]

It could be stuck due to being on all winter? Try the steps shown in this link: www.hunker.com/13404630/how-to-remove-a-stuck-water-hose-fitting

[@nudgexs]

Hi, my tap is really thin (around 14mm) and ali need a thread tap connector for this size but can’t find one anywhere🙄 do you provide them?

[@sammorganmoore]

Did you show connecting these connectors to a pipe? !

[@garden4less]

Yes, around the 3.08min mark on the video, it shows a connector being put on a pipe

[@sammorganmoore]

@@garden4less Fair play.. but he is talking about mending a break :)

[@uniques-ir7xz]

I have a red clip, it’s on the watering end of my hose. But when I turn the tap on, it stops the water coming out of the hose all together and it just builds up and disconnects cos the water pressure in the hose is too high. Any idea how I fix this? Thanks

[@garden4less]

I would recommend soaking the hose in warm water to dislodge any debris which may be in the hose , another thing I could recommend is a new connector, as it may just be a faulty connector instead of hose.

[@anitamtubatuba5050]

I have Hozelock hand sprayer connected to a Hozelock hose pipe but the hand sprayer pops off all the time, Why? Thanks

[@garden4less]

This could be a faulty hose end connector - suggest you purchase a new connector to help with this

[@OXFORDSHIREFAIRGROUNDS]

So you don't put an aqua on the end of the hose that connects to the tap?.

[@garden4less]

You put the aqua stop connector at the sprayer end, so you can swap the accessories easily

[@MariaLincoln]

The auto stop connector doesn’t seem to work for me no water comes out when I attach the sprayer ? WhAt am I doing wrong

[@garden4less]

The little valve inside the connector may be faulty. Try putting your finger inside the connector whilst there is slow flow of water and see if the water flows out (don't point at your face!)

[@turnpikelanehouse]

The connector leaks, do you know how to stop it? When I turn the tap on the water flows through the tap connector but when I attached the aqua stop connector to the tap connector, water flows out at the top? Thanks

[@garden4less]

Make sure the hose is fully inserted into the aqua stop connector. If it continues then call whoever you bought it from or Hozelock themselves as it could be a faulty one.

[@ciaranmulhall5886]

This the very same issue we have and when we bought a new 50m hose reel kit and several connections it continued to do this?

[@stuartramplin9265]

So which end do I put on the tap and which end goes on spray gun end as I do no have that brand of connectors mine are leaking wen I turn on my tap I have a malw and female one has a cross thread inside and one is just open which allows the water to flow threw easily which I suspect goes at my tap end but its has water leaking from it wen I turn tap on my hose isnt expensive winter maybe I need to invest in a better hose and connectors

[@garden4less]

Hi, the cross thread connectors normally connect to taps. It could be that it's the wrong BSP size for your tap which is causing it to leak. If you measure the diameter of the tap and then make sure the diameter of the connector matches, if it still leaks then there could be a fault with it. The male end should be able to connect into your spray gun but it's hard to say without seeing them. If you want more help then you can send us photos of what you have on Facebook messenger and we can try to figure it out from there. Hope this helps and you get it working :)

[@hotjenna]

How do I fit the spring I'm by

[@garden4less]

Not sure I understand - could you provide more details?

[@ciaranmulhall5886]

Can the pressure of water prevent water coming out of the aqua stop connector as water gets to the reel without it. We just bought new ones and still no joy.?

[@2048robert]

Hi i have the superhoze and the need to replace the ends iv bought two different types and dont fit can you tell me which one i need thankyou

[@garden4less]

Hi, looking at the ones we sell, this should be a suitable replacement www.garden4less.co.uk/product/hozelock-hose-end-aqua-stop-connector-2055 If you've already tried these then I suggest measuring your hose depth and seeing if one of these would fit www.garden4less.co.uk/product/hozelock-hose-end-water-stop-connector-2075 Hope this helps!

[@2048robert]

Thanks its not that one iv already bought that it has a thinner inside to fit in the superhoze

[@danmoss388]

Very helpful 👍

[@thenododonnell]

No attachments 😢

[@aaqibrawat3863]

I have a 10 meter hozelock hose. How do I extend it ?

[@garden4less]

You could use a repair connector or a double male connector to connect your 10m hose to another hose

[@barrykoikeepercooper8052]

Great for my pond new subscriber Barry Manchester England 👍

[@houston1947]

All I want to know is how to STOP the leak inside the hose reel!! It's a brand new hose. I've taken it apart twice and it still leaks. Arghhh I shall be taking it back.

[@garden4less]

Sorry to hear this. Hozelock Support should be able to help: email [e-mail] for assistance.

[@borleyboo5613]

In the UK, we say ‘lesure’ not ‘leesure’. But helpful video nonetheless.

[@garden4less]

Sorry this word slipped into the video. Our presenter momentarily forgot he was from the UK and not from across the pond!

[@les7785]

Talks too quickly so it gets hard to follow. Should go more slowly and show each part with pauses in between. Equipment is expensive.

[@bitTorrenter]

I wouldn't call it a Hose Repair Connector. It should be called a coupler.

[@helenjohnson6385]

I found this was too fast to understand easily.

[@garden4less]

Sorry about that - we will take your comments on board for future videos

[@kayspeak2227]

Really great info thank you. However, PLEASE look at us your audience - instead of being led by the stupid 'off camera' (someone in TV/Video decided was clever videotography). NO, not clever, really annoying and actually insulting that the presenter/speaker appears more interested in looking at anything else than the viewer.

[@ProphetsOfRockTV]

What do you do if your hozelock keeps coming off of the tap? I’ve cleaned it but it keeps coming off

[@garden4less]

Sound like you may have a faulty tap connector, or the lip on the tap has worn away causing the connector to slip. You can identify which is at fault by attaching a spray gun to the problem connector, if that also comes off with some pulling then it's the hose end connector that needs to be replaced else it's the tap connector. You can buy a new hose end connector from us at www.garden4less.co.uk/search?Term=Hose+End+Connector&Category=Hose+Fittings+%26+Connectors (you don't need one with the red band [an aquastop]), you can also buy a new tap fitting at www.garden4less.co.uk/search?term=Female+Tap+Connector