Hp Ink Tank 410 Series Print Head Cleaning

[@JunbaTeks]

People also watch this video: Hp Error 3 Problem Changed Encoder Strip Guide kzbin.info/www/bejne/oGLQpIGsp7GtaMk&si=EnSIkaIECMiOmarE | Hp Ink Tank 410 Series Not Printing Blue And Yellow Solve kzbin.info/www/bejne/mH3UgIGegbmfhtk&si=EnSIkaIECMiOmarE | How to suck the hp printer's ink tube line with a syringe kzbin.info/www/bejne/g2KTnIqjgKtmeaM&si=EnSIkaIECMiOmarE

[@Zero-vj6vz]

Огромное спасибо за видос , в сервисе сказали менять голову и точка , даже не попытались делать , а по этому методу все получилось и принтер работает на отлично .

[@JunbaTeks]

Я очень рад тебя слышать. Спасибо и вам тоже.

[@MrLhoutre]

Thank you SOOOOO MUCH! I had "lines" and blur problems with my 410 series printer and the manual cleaning with the water solved the problem!! Now my hand are full of ink BUT it worth it! I was on the way to buy a new printer but now I don't need anymore! Thank you again mate!

[@JunbaTeks]

Glad it helped. Thanks also to you bruh.

[@manikprince2332]

With normal water or little warm water?

[@JunbaTeks]

@@manikprince2332 Yah

[@lanntm]

I went to HP to repair my Ink tank 410 three times but not work well, and your solution works perfect, amazing

[@ririroro3506]

Please I can't understand the language of video can u help me?

[@George-uv7wt]

@@ririroro3506 u can use google translate

[@fxbelal509]

HOW CAN I GET THE SOFTWARE?

[@Nerak924]

I have HP Smart Tank 519. 2 months pa lang siya pero nagkaroon na ng problema. Ang dami ko nang napanood na tutorials like software cleaning pero walang effect. Nagkaroon ng white lines sa xerox, sa printing at nagka-smudge na rin kapag nagprint. Meron ding mga videos about cleaning printheads kaso hindi nila ginawan ng step by step. At first natatakot ako kanina itry ito, yong sa may warm water. Kaso sabi ko, try ko na lang at tripleng ingat sa pag-alis, pagbabad sa warm water (30sec) at sa pang-insert. At boom! Ayown okay na po siya 😊 Noong binabad ko sa warm water ang daming namuong ink sa printheads. Maraming salamat po. God bless you 😊 Nakasave po ako ng pera at time. Sobrang layo po kasi sa amin yong pwesto nong nag-aayos ng printer na sinabi nong nagbilhan namin sa sm 😅 Salamat ulit po.

[@JunbaTeks]

Glad to hear you sis. God bless your family.

[@brunodenila2473]

maraming maraming salamat bro, isa kang dakila..mabuhay ka

[@marstor1620]

Malaking tulong ang video ito at nagawa ko ang printer ko. Thank u sir.

[@amolchavhan3083]

Within few second u solve my printer problem sir thanks ones again sir👌

[@BryanDaveLorenzo-w1p]

THANK YOU SO MUCH!! YOU SAVE MY LIFE AND MONEY TO BUY NEW ONE! IT REALLY WORKED!!

[@JunbaTeks]

Glad it helped! Thanks too.

[@rajkumarpandav3638]

For this Video I clean my Printer very easy and short time its very useful me Thanks

[@iamlkchacha5913]

thank you kuya sa video mong ito. i dont need to go outside para ipagawa printer ko. my printer is fixed now. sinundan ko lang tutorial mo kuya.

[@JunbaTeks]

Oh, thanks glad to hear you.

[@pgshiva1]

hi sir is 100% working thank of 🧘‍♂ 🧘‍♂

[@JunbaTeks]

Hello, and thanks too. 🥰

[@albertosangalang6039]

laking tulong .. salamat po , more videos to come sir

[@JunbaTeks]

Glad to hear you brod.

[@jcrinconcol]

Great tutorial! It really works great! Thanks my friend!! 😀

[@JunbaTeks]

I'm so proud to hear from you Amigo.

[@sidbevera]

Thankyou somuch. It worked for me. My printer was dispensing only magenta colour and all others were blocked. I cleaned as advised also cleaned inlets using Syringe. It worked 👍 😀

[@JunbaTeks]

Thanks your nice comments.

[@lanntm]

thanks very much, your solution works and save my money :)

[@loriimdad]

Thank you. My computer print quality was awful after a move where the movers kept the printer on its side! Software-based cleaning and alignment did nothing.

[@100KEEN]

Thankyou so much Bhai. Very Helpful information. It helped me a lot. 100%genuine information🙂🙂

[@JunbaTeks]

Glad to hear you bro.

[@deyaadee9753]

Hello..question pls...I did the cleaning for the head and color gets out dine..but the ink on the tubes keep going back to the tanks away from the head ..what can be the reason for this? Even if i tried to get it back to the nozzle..while printing it again go back to the tanks

[@JunbaTeks]

Oh! sorry to say that your printhead is clogged inside. it cannot be cleaned this way.

[@deyaadee9753]

@@JunbaTeks so there is no way to fix it pls?

[@JunbaTeks]

Yes, If it is confirmed that it is clogged inside, our last option is to buy a new print head.

[@gerlybilo7467]

boss's pwede rin ba Yan Gawin sa HP smart tank 500 series same kse ung problema ee ung sken po

[@JunbaTeks]

Yes mam pede sa print heads.

[@nastenka27rus22]

Окунать в кипяток обычный?

[@JunbaTeks]

Теплая вода, сэр, от 60 до 80 градусов.

[@meldaps664]

Very helpful content, kaso wala akong printer.

[@Mini_1910]

Did I have put it in water???

[@JunbaTeks]

Ya warm water.

[@toyztv3648]

galing bos, legit na legit

[@JunbaTeks]

Thanks

[@johnyron1776]

Happy to see this video.

[@riankaYT]

Thank you very much

[@ritobertes4656]

Ol aroun jud imo talent gaw kamao sad ka sa printer.

[@gurubilliuma7635]

Cleaning water yes or no please

[@jannlyntv2974]

yes hot water

[@makathleenadona3900]

Hello po, nang ginawa ko po ito nagkaroon na po ng black. Kaso hindi pa rin po complete ang black. Pwede po bang ulitin ko na tanggalin ulit ang printhead at ibabad sa mainit na tubig? Maraming salamat po.

[@JunbaTeks]

Yes mam pede ulitin, pero huwag masyadong mainit.

[@kratigolash]

worked perfectly! thanks for doing this

[@potatoochii]

Thank you kuya, gumana talaga sya nawala yung mga white lines huhu 🥰🥰

[@JunbaTeks]

You're so welcome.

[@Foolize]

i tried this but still only pink color is coming in the printhead even after flushing it. what should i do

[@JunbaTeks]

I have another video that might help you, please try it. kzbin.info/www/bejne/mH3UgIGegbmfhtksi=arwvJd7MUq5ZUefY

[@SNEAKERFORGE92]

Hello Boss Junba! Maraming salamat sa video mo. nakailang software cleaning na ako pero di gumana. Yung manual cleaning mo ung gumana. Maraming maraming salamat. Add ko nalang din na kapag nagka roon na ng black ink at ayaw di maganda yung print details sa black kahit naka ilang software cleaning na after ibaba, i repeat lang ung process .

[@JunbaTeks]

You're so kind, Thanks bro.

[@arlandtg]

Thank You. Good job. It worked for me.

[@etuniquetech05]

Thank you very much for your help.

[@amolchavhan3083]

Thank u so much god bless you sir 🙏🙏🙏👍👍👍

[@JunbaTeks]

Welcome sir.

[@dragonpalace1807]

спасибо, чувак!!!!! помог!!!

[@JunbaTeks]

Я дуже вдячна, що у мене з'явився такий новий друг, як ти.

[@dragonpalace1807]

@@JunbaTeks ты-девушка?

[@dragonpalace1807]

@@JunbaTeks взаимно.) у меня после заправки краской принтер стал все розовым печатать)) по твоему ролику почистил головки и вуаля- все норм!))) благодарю!!!

[@luffy3257]

я боюсь это делать

[@jannlyntv2974]

Nice music background gawiks.

[@ahmednassef8367]

I have a problem with the blue color not reaching the printer

[@JunbaTeks]

Check the ink pipe sir if there is blue color inside, if there is no ink in the pipe, you need to suck it using a syringe. Thanks

[@sidbevera]

@@JunbaTeks it worked. Thanks a lot. 👍

[@q_b33]

Thanks a lot for your help 🌺👍🏻 it worked out for me 👍🏻👍🏻👍🏻

[@calocoy6434]

helpful! thanks!

[@pK-tm3dx]

Hii I have hp410 wireless. All Ink are filled but yellow and blue colour not printing on page ,only Black and pink coming. 2 months back i bought

[@pK-tm3dx]

Please help in this

[@JunbaTeks]

It is possible that the tube line with a particular color is clogged. Check if the ink is full inside the tube line.

[@pK-tm3dx]

@@JunbaTeks little bit not filled

[@pK-tm3dx]

Yesterday I used some air fill removing by using some gadget provided by hp I don't want to open whole printer I just want to rectify I tried a lot but still not coming

[@JunbaTeks]

@@pK-tm3dx Just continue cleaning using software first. If nothing changes, you have to remove one end of the tube ( Print Head Side ) and suck it with syringe until it fills up.

[@robertorebola7532]

are you using water ???

[@JunbaTeks]

Yes sir, hot water.

[@ajcinco1853]

Any idea, why printer/device is busy when I clicked the clean?

[@JunbaTeks]

Here are 7 steps you can try to resolve the problem from hp support. 1.Turn off the Printer: Turn off the printer and unplug it from the power source. This will ensure your safety and prevent any further damage. 2. Remove and Clean the Printheads: If possible, remove the printheads (cartridges) and clean them. Use a lint-free cloth and distilled water. Gently wipe away any excess ink. Be careful not to touch the nozzles or other sensitive parts. Allow the printheads to air-dry before reinstalling them. 3. Check for Ink Residue: Make sure there is no ink residue inside the printer. Clean any spilled ink carefully. You can use a lint-free cloth or cotton swabs for this purpose. 4. Reset the Printer: After cleaning, plug the printer back in and turn it on. Try to perform a reset if your printer has that option. Refer to your printer's manual for instructions on how to reset it. 5. Check Cartridge Status: Ensure that the cartridges are correctly installed, and there are no obstructions. Make sure that they are securely in place. 6. Check Paper Path: Ensure that there are no paper jams or other obstructions in the paper path. Open the printer and check for any bits of paper or foreign objects. 7. Printer Status: If the printer status still shows as Busy, it's possible that there is an internal issue. Try turning off the printer, unplugging it, and leaving it unplugged for a few minutes before plugging it back in and turning it on. I hope this helps.

[@ajaykumar1000]

Thank You

[@Carlover-0001-y]

HP WL 410 cartridge refill video banao.

[@jetzerleyson1872]

Hello may I ask, how to switch from cartridge to ink? I’m using the cartridge unfortunately naubos na yung yellow ink. But i have ink naman so refilled the ink tank. Pero when I tried to print, wala paring yellow. Is there an option ba to use the ink from the ink tank. Not really familiar sa mga ganito. Thank you.

[@JunbaTeks]

Walang ibang option dyan sir kon di kailangan talaga yan i suction ang tube line sa yellow. Tingnan nyo muna kung laman ba o putol putol ang ink sa tube line.

[@jetzerleyson1872]

@@JunbaTeks I haven't used the ink tank po eversince. Never ko sya nalagyan ng ink. Ngayon lang ako naglagay.

[@jazzlicawayan4458]

nice content gaw.

[@baburoy6410]

Are you sure nothing will get damage?? I'm having problem with all 4 colours ,they are lighter then usual in prints

[@jerome-wz8dl]

Not sure but it works for me.

[@JunbaTeks]

Just follow the steps sir.

[@baburoy6410]

@@JunbaTeks I did manual test in that other 3 colours were fine but the black stripe didn't print . What does that mean??

[@JunbaTeks]

@@baburoy6410 JUst try to clean up back the black printhead sir and keep on software clean for at least 5x.

[@baburoy6410]

@@JunbaTeks dude thanks a load, you saved 20$ (1590 ₹) of mine . Dude you are such genius,I'm too thankful to God that I came across your channel.🤗🤗👍

[@galiciacyrilvong.3914]

Pwede cleaning solution?

[@JunbaTeks]

Pwedi, yong cleaning solution for printer.

[@ulgocel287]

Bro saan pwesto mo pa repair ako ng aking printer.

[@Honeyladoo]

Hello.. After installing print head, I unable to lock cover..I push it downward but nothing happens.. Plz help

[@JunbaTeks]

Try to press the cover, use your thumb to support underneath or above or where it is easy for you. Hindi ba ninyo na pwersa sa pag open sa cover Idol? Baka na damaged yong lock. Thank you.

[@jinballeras136]

meron po ba kau sa 515?

[@JunbaTeks]

Wala mam, pero yong driver nila pareho lang. Ano pong problema ang sa iyo mam?

[@jinballeras136]

thanks po sa reply sir. kakapalit lang kasi ng printhead na blck nung hp515 ko sir pero wala pang 1hour eh di na po uli nag print yung black,

[@JunbaTeks]

Sory di nka reply ngaun lang nkabalik siguro ayos na po printer ninyo.

[@jinballeras136]

hindi pa nga po sir ee.. hahaha..di po uli maharap

[@JunbaTeks]

haha kala ko ayos na matagal na kasi. Ayos sa umpisa tapos after 1hr. hindi na? Subukan mong i-reinstall sir baka lossed contact lang.

[@aezajoven5466]

normal po bang matigas yung parang blue lock ng printhead? natatakot po kasi akong diinan at baka masira. mahal pa naman magpagawa hehe

[@JunbaTeks]

Yes mam kasi may lock kasi yan. Suportahan mo lang sa baba mam.

[@jayakumar3311]

Worked for me

[@noordeen9976]

don't you think so printhead when we dip into the water it can be problem with that printhead? now printing quality improved ???

[@jayakumar3311]

@@noordeen9976 It was just surface dip in water to remove solidified ink and quickly dry using tissue paper. I didn't face any problem and prints improved a lot.

[@jannlyntv2974]

@@jayakumar3311 correct.

[@applefroyojournal]

di po gumagana yung yellow ng printer ko at na suction ko na yung tube ng yellow pero pag binababa ko yung blue na cover ng printheads bumabalik po yung ink tas ending wala nanamang ink yung tube ng yellow (sa yellow lang din po nagkakaganun ok naman yung iba pag kinoclose ko na yung cover) may idea po ba kayo ano gagawin dun? thanks ahead

[@JunbaTeks]

Di ba may close and open valve selector sa ink tube sa ink tank. Bago ka mag suction open yan. Pagkatapos mong mag suction i-close mo para di babalik ang ink.

[@makathleenadona3900]

Hello po, paano po kung Yellow lang ang walang kulay, maaari ko pa rin po bang gawin iyang manual cleaning po? Maraming salamat po. Gusto ko pong subukan kahit sa bahay lang po sana bago po pumunta ng service center.

[@JunbaTeks]

Subukan muna software cleaning mam mga 5x or more kung walang improvement tingnan ang tube line na yellow kung laman ba, kung wala kailangan talagang i suction using syringe.

[@LuckyLuck787]

I did not use my printer and kept in the box. One day, I notice the box was wet with leaking ink. The magenta ink was leaking until nothing left in the ink tank. Anyone knows why it leads out of sudden?

[@JunbaTeks]

Maybe the magenta tank is already punctured or maybe the ink tube is broken or not properly inserted.

[@JunbaTeks]

@PARALEOXD just type hp ink tank 410 driver in your browser > chose printersdrivers.com > download software w/ widows 11.

[@vynecrixelocenar9233]

Sir.. wala pong yellow na lumalabas.. ginawa ko na po yan.. ayaw pa rin

[@JunbaTeks]

Subukan muna software cleaning mam. Kung hindi talaga tingnan ang tube line na yellow kong may laman ba?

[@ademantine7151]

same situation din po, ginamitan ko na rin ng syringe pero wala pa rin yellow :(

[@JunbaTeks]

Malaki ang gagawin natin dyan mam. kailangan kalasin ang board at carriage at doon tayo mag suction sa likod ng ink cartridge at gagamitan natin ng suction rubber sa tip ang syringe para 'di mag leak.

[@ademantine7151]

Yun sa printhead nya po mismo wala din nalabas na yellow, blue at magenta lang po.

[@JunbaTeks]

@@ademantine7151 Buti sana kung malapit ka dito sa amin sa Camotes boss para mapuntahan kita ako na ang mag repair. Mahirap kasi ang problemang yan sa mga beginner.

[@owyeaaah29]

sir, ayaw magdispense ng yellow ink nung saakin. ginawa ko na procedure mo. ano kaya pwedeng gawin?

[@JunbaTeks]

Kailangan mo na yang i suction ang tube line ng yellow mam, baka may hangin na yan sa loob.

[@albertosangalang6039]

pasend po san ung software sir..

[@JunbaTeks]

HP ink tank wireless 410 series software and driver.

[@lhexyalyannacatimbang1386]

Paano po pag yellow ayaw mag print as in wala talaga??

[@JunbaTeks]

Wala ng laman ang tube line ng yellow mam, kailangan yan i-suction gamit ang syringe.

[@lhexyalyannacatimbang1386]

@@JunbaTeks may tutorial po kayo nun?

[@JunbaTeks]

Sa ngayon mam wala kasi hindi ko nakunan ng video yong may nagpagawa sakin. Siguro sa sunod pag may magpagawa sakin ipapakita ko sayo.

[@linscawa4720]

Ok Po

[@kuruvimasa]

Still didn't get Yellow colour Any one guide me

[@JunbaTeks]

Try this method, maybe it help! kzbin.info/www/bejne/j3mwd3qvoMyjhK8si=aB5lBIoQkNZVOgbA

[@shairacannu5239]

Sir paanu po pag yung yellow ink is not working kahit puno naman yung sa ink tank niya

[@JunbaTeks]

May problema yan mam sa tube line baka wala ng laman, kailangan yan i-suction, pero subukan nyo muna i-clean up ang printheads through software.

[@kiethsabay7693]

Paano gagawin kuya pag black lang nag pprint?

[@JunbaTeks]

Before yan nangyari sir mayron ka bang ginagawa o naubusan yan ng ink?

[@justice754]

@@JunbaTeks Hnd naman naubusan sir ng ink. bigla nalang hnd nag print ng colored. Mga 6 months ago na

[@justice754]

@@JunbaTeks Palitan ko kaya ng printhead kuya? tingin mo ?

[@JunbaTeks]

@@justice754 Huwag muna. tingnan muna kung may laman ang tube line na colored ink.

[@JunbaTeks]

@@justice754 Yung 4 na hose ba sir na daanan ng ink tingnan kung may laman ba.

[@andreymiryaev2672]

Какого чёрта музыка громкая?????

[@JunbaTeks]

Я сожалею об этом, брат.

[@tchickis]

Thank you so much