Tutorial how to fix HP Laserjet 2300 series error include paper jam.
Пікірлер: 19
@PabloWebmail4 жыл бұрын
The piece that you show at the end of the video goes under the network card holder. It fits in a hole just below a corner of a black plastic piece. I have gotten my printer to work again. Thanks friend
@walat14253 жыл бұрын
Thank you very much my brother, this helped me alot and fixed my printer perfectly. Now im so happy it works totally fine!
@boczniak7 жыл бұрын
Thx! It really works. Anti magnetic separator is needed. I made it from old rubber. Without it metal badge sticks to solenoid. You saved my old printer :-)
@friarchris25 жыл бұрын
I used two pieces of regular sellotape which were oversized so there is no way the sticky stuff could touch the main solenoid. Noisy though. Thin cardboard and double sided tape might be better.
@alfonzo9077 жыл бұрын
Could not tell how to disassemble to get to the area you were working on. Other than that , it is an excellent video. Thanks
@leil.83997 жыл бұрын
Thank U very much, thanks to your movie, i could solve the problem of my printer.
@simonyovino21266 жыл бұрын
Thank you for this video! My printer works fine now.
@Oliver-kv2mm Жыл бұрын
Pull the armature out of the solenoid bracket, to release the spring. It is easier than trying to stretch the spring.
@vladimirk98606 жыл бұрын
At the end of video you show some part. I have the same problem. Did you find where part goes to?
@solaadebisi88923 жыл бұрын
Hello, I have followed the instruction to the letter but still getting duplex paper jams at about Page 5/6. What would you suggest I look at next?
@walat14253 жыл бұрын
does normal tape work for this or has it be some kind of special electronic tape? im aftaid that the tape will start burning or something
@janderijke97265 жыл бұрын
Works super, thanks a lot
@ethankcvds4 жыл бұрын
I managed to take mine apart but I took apart something I shouldn't have on the drive assembly and lost a piece.
@chancelewis34117 жыл бұрын
i tried to pull the paper out and it has got stuck with a tiny bit showing and i cant get it out how could i remove it
@RichardTWoodward4 жыл бұрын
I'm having a hard time finding a link to a video that shows how to open up the printer. Can you suggest one?
@ethankcvds4 жыл бұрын
Look up the service manual it tells you how to take it apart.
@walat14253 жыл бұрын
i agree, it was very hard to open and close it. Its a big puzzle, you need to do it in the right way, but now i know how to do it.