Рет қаралды 2,584
Instructional on loading your stock tune back onto your vehicle with your RTD Interface or MPVI2.
oztuning.com/r...
* Plug up your RTD Interface or MPVI2 to your OBDII port, and to your laptop. A good internet connection is required.
* Open your HP Tuners software.
NOTE: RTD requires the RTD Flasher software, and the MPVI2 requires the VCM Editor (BETA) version software.
* Open and load your stock file.
* Turn your key to the On position, but DO NOT Start the vehicle.
NOTE: Turn off all accessories to prevent battery drain that can interfere with the process.
* Click Write Vehicle in the menu and the Vehicle Writer box will open.
* Click on Write in the Vehicle Writer box. NOTE: It will take about 3 minutes to complete.
* Follow the prompts to "Turn Ignition OFF. Wait 3 seconds. Turn Ignition on and click OK".
* You will see a Write Completed message. You are safe to close that window and disconnect from vehicle.