HSDJETS MFC quick start guide from HSDJETSUSA

[@artmechanic]

This is very helpful and interesting. I'm about to buy my first HSD jet and I'm a long time Futaba user, so this video is especially useful. Thanks again and you'll see my order soon.

[@PilotRyanMedia]

Great video! This will be very helpful.

[@ArthurRC]

Thanks Andy for that quick guide 😉👌🏻

[@victorrcjets7660]

Really glad you made this video! Great job!

[@carlosperez7015]

Hi, The manual doesn't show a Gyro (Cortex) connection. I'm using Futaba SBUS

[@cos55]

How can I integrate my cortex pro with this system please?

[@KevinThoele]

Can you use 7003 sb on SBus and control all channels like it works on power box? This looks like a great system. Also, two 7003sb receivers can be hooked up for redundency?

[@hicksmilner5223]

Any chance you could do a video showing a complete set up with a IX-20 and a Spectrum receiver?

[@Shauncat1]

Would love to get one of the HSD 12 S jets one day. Either T33 of F16. They are beautiful

[@kennethnunes6157]

Do you have a set up video for Jeti 12 channel stability plus receivers?

[@johnmueller5482]

Very helpful video

[@IceMan2035]

Hope y'all are still in business. Just found this site and this is something interesting until I get my Skymaster.

[@hsdjetstexas]

In business everyday.

[@berest-parquet2210]

Hi, I'm currently setting up an HSDJETS Super Viper, having the MFC makes the plane a lot easier for use and I'm happy about it. Currently, there is a need to connect the flight controller OrangeCube for the aircraft's mission flights, I would like not to disrupt the electrical wiring and continue to use the MFC. Could you please give advice on how to correctly connect the MFC to the Orange Cube with minimum wiring (because I would still like to use MFC and not connect servos directly to OrangeCube)?

[@gerdd.5639]

Hello First of all thanks for the top help Everything worked fine with Futaba S-Bus on the T33 I have a question about Cortex or I-Gyro 3, what is the connection if you use S-Bus. Do you have a manual. Thanks for the help.

[@hsdjetstexas]

It's possible to run a Cortex Pro through S bus, however, we recommend simply going plug to plug is running a gyro.

[@alexanderverges257]

HSDJETSUSA This is a great question and I can imagine a very popular setup for most of these models... it’s how I’m going to be set up as well. Waiting my model to come in but if someone could create a step by step how to on connecting Futaba s-bus and cortex pro by a-bud it would be amazing. It’s so much cleaner and the main advantage of Futaba I’d rather utilize that benefit.

[@cos55]

@@alexanderverges257did you ever get it to work???

[@MrFishface5]

Guys a quick note you do not need 2 batts to make it work. I fly both of mine with 1 -2s batt

[@carlosperez7015]

Sorry to bother. Would you know if the MFC has a screen dimmer setup? I can barely see the screen on mine. Thanks

[@gerdd.5639]

nice video when you have futaba you can set a video with instructions for spectrum. thanks.

[@hsdjetstexas]

Spektrum users can follow the same steps as the Futaba traditional wiring process that's discussed here. It's the exact same...

[@octane2099]

so this is a 6 channel plane with brakes right so i would be able to run as3x receiver also for scale flying would you recommend this one or the new one with 20 percent more wing

[@hsdjetstexas]

Yes as3x works fine. Only the turbine version has the larger wing.

[@octane2099]

@HSDJETSUSA thank you guys I get my f16 Monday can’t wait 🤙🏽

[@naratasavakesmanee1058]

Can MFC2085 be used 2sbus ports for redundancy of 2recievers or backup of 2nd reciever when the other reciever has signal problem?Did it intend to have 2 ports of sbus for this purpose?

[@hsdjetstexas]

Yes

[@lmramos44]

Thanks Andy, how close is that container coming in from China?

[@hsdjetstexas]

We had one arrive this last week. Is that the one you're referring to?

[@lmramos44]

Just wondering about my T-33......

[@hsdjetstexas]

@@lmramos44 has yours shipped? To what city?

[@lmramos44]

HSDJETSUSA San Leandro, Ca.

[@hsdjetstexas]

@@lmramos44 I believe all pre-order t33's have shipped. Check for a PayPal email with your tracking number.

[@williewideback]

i just purchased the new Cessna 182, with the new MFC-2065 Control system. Im using a Spekrum 9ch radio and 9ch receiver with no S-bus. is there any farther information on this control board? the manual is bleak as far any details

[@martinh2834]

Have a look on KZbin for “Wiring a HSD JETS MFC 2085 and a Spektrum Ar9030T”

[@johnbednarz1424]

I have an f16 I bought 2 years ago, I plan on ordering the new upgraded fan when you guys get them back in stock an a new controller. I know the new controller will be blank, but do you have all the settings that I be able to get to program it for my HSD 105mm F16?

[@hsdjetstexas]

We do have the settings available for the f16. It takes about 15 min to set one up for scratch. We have the new EDF fans in stock and available now. More MFC controllers should arrive in about a month.

[@steffydog]

Great stuff

[@gerdd.5639]

Hello I can't get it right with my spectrum. Got myself a Futaba T14 SG with R7008SB. I think that's the best solution. My question is, are all adjustments like elevation aileron etc. done on the MFC 2085 box or do I do them on the transmitter on the transmitter? What is programmed on the transmitter? For a help or tutorial video about Futaba transmitter HSD T33 EDF programming

[@hsdjetstexas]

There is nothing to do in the plane if using Sbus. You'll need to assign a channel and switch in your transmitter for the flaps, gear and brakes.

[@gerdd.5639]

Thanks, that helps me. One more question. Aile oars and flaps setting on the box? Hi/Low Rade. Or at the station.

[@hsdjetstexas]

@@gerdd.5639 you'll set rates in the radio

[@fern6978]

Awesome! 👏🤘

[@castlefranck3979]

Hello i'm a Futaba SZ 18 user does i need to reverse the throttle channel as always with esc ? Best regards

[@hsdjetstexas]

Usually.

[@ace-gc5xm]

can the (MFC-2085) be used on any model or only HSD jets?

[@hsdjetstexas]

It can be used in other models.

[@hicksmilner5223]

so no Spectrum receivers have a SBUS port ?

[@hsdjetstexas]

Spektum does not support sbus. It's a futaba feature.

[@cx9drvr]

The MFC does not support JR X-Bus receiver protocol

[@hsdjetstexas]

Nope. Xbus is not futaba sbus.

[@minuteman4394]

Why the music? its off putting otherwise a very instructive video Thanks

[@williewideback]

I was under the impression that this jet had a built in Gyro! No?

[@hsdjetstexas]

No gyros are included.