Good info Bro, what's the stock pinion size for this buggy, and do you happen to know the pitch size for the spur and pinion. Im looking for pinion gear for 5mm shaft
@yairc4 ай бұрын
Hai, apologies I couldn't remember the stock pinion gear. ill update if I come across the info. TQVM for watching.
@valentinosgsxr4 жыл бұрын
Hello mate. For the looks of your worn gears, your gear mess was too tight.This also can worn your motor very fast putting strain on its ball bearings. A good gear mess would be around 0.3mm of gap between messing teeth and the motion should be almost silent. Brush pinion is soft and wear out quickly while plastic spur gear has the ability to work smooth like it is self lubricated thus it doesn't need grease. In fact, most of the greases attack plastic make them soft and turn them to paste. Metal spur is only good for slow speeds as they can handle high torque better and inertia and motor strength is not a problem. Also small difference in gear teeth has big effect in speed of the car. So expect your car to be significantly slower with 3-4 less pinion gear teeth. Too big of a gear and you are asking too much from the motor which is going to overheat. You need to experiment with gears to find the sweet spot of your current motor and ESC system which means keep the speed high and the temperatures low. Have fun with your great car as I do.
@yairc4 жыл бұрын
Hai bro, thanks for your input and its explain alot. No wonder there is no grease for plastic spur gear. Thanks for your time to watch my video.
@alanscofield88304 жыл бұрын
Thanks for your help yairc. Happy R/Cing.
@yairc4 жыл бұрын
Thanks, you too..we should get our young generation to start R/cing too..kids nowadays so occupied with mobile phone.
@alanscofield88304 жыл бұрын
@@yairc hello signal bad at moment so u may not get this? The dog bone came out again yesterday. I had tighed tie rod too. I use my XSTR BUGGY about 2 or 3 times a week mostly on road. I don't know where I can get spare parts? When I got it the paper work said 2017 I thought I was getting a newer can. Sorry to bore u we have lockdown again where I am in UK
@yairc4 жыл бұрын
@@alanscofield8830 hai bro...no worries, we all learning. Your best bet to get spares is from ALIEXPRESS. But the thing with ALIEXPRESS is the delivery time are very2 slow and it is normal. I am from Malaysia and it usually takes 3 to 4 weeks to arrive. I am not preferred to buy from BANGGOOD as the price are much more higher from ALIEXPRESS. So far i didnt see any youtuber from UK playing with XSTAR. My advice to you, since you playing on the road, do not upgrade your swing arm and chasis to metal as it will be expensive to replace and it easily bend if you hit the curb. Back to your dog bone, i do really see my fellow friend has an same issue when they playing on the road. But rarely has dog bone fell off when playing on the dirty. Could it be tarmac are more harsh surface for your buggy? Should you have any question again, please do msg me here. I hope i can guide you too. Other then tie rod, how bout your axle cup? Does it too lose, or have you compare the lenght of the dog bone with others. Could it be shorter, it can happen they wrongly install different dog bone from different model. 🤔🤔🤔🤔
@alanscofield88304 жыл бұрын
@@yairc hello thanks for reply. So you think banggood maybe best place for spares? Ploblem with using it on dirt this time of year is it gets do dirty takes ages to clean. I got the car from NITROTEK, And odd thing is when I try to look at the site now, I get a warning on my mobile unsafe site??
@yairc4 жыл бұрын
@@alanscofield8830 no, ALIEXPRESS, BANGGOOD is expensive.
@alanscofield88304 жыл бұрын
Thanks for your reply yairc Afraid I am new to this hobby after many years. I don't know what TIE ROD is?
@yairc4 жыл бұрын
😁😁, the link that connecting your C-Hub..above the swing arms..hehehe..its ok..nobody is pro..we always learning.
@alanscofield88304 жыл бұрын
Hello , I have HPS XSTR Only had it few weeks. The right side front drive shaft or ( dog bone) has fallen out twice. Don't know if you can help me please. I've only just started using r/c cars again. Thanks
@yairc4 жыл бұрын
Could be your tie rod too loose? Or adjusted to wide?
@silverback15403 жыл бұрын
Put a rubber O ring into the drive cup.
@rubenraj3387 Жыл бұрын
use CVD DRIVESHAFT, its very safe from missing when you hit hard
@ramlisoeryadi44623 жыл бұрын
how did you know that your spur gear & pinion wear down? did your RC not moving at all? mine is slipping, not sure whether it's the spur & pinion gear or the differential.. Thanks for replying!
@yairc3 жыл бұрын
hai, yeah..my RC move but slipping..so i decide to check and found out the spur gear are grind up by the motor pinion gear...maybe the mesh wasn't set properly by the factory..so i think the spur and pinion mesh was too loose out of the box...
@jijiexandriachannel73844 жыл бұрын
mantap
@mdsyafeq4 жыл бұрын
Terbaikk..
@yairc4 жыл бұрын
TQ.
@hazriazeri36313 жыл бұрын
Terima kasih perkogsian bng
@yairc3 жыл бұрын
sorry bro lambat reply, trima kasih kerana sudi menonton. TQ.
@fullarmourtracksuit40233 жыл бұрын
Why wouldn’t you show it running with the new pinion?🤦🏻♂️
@davidledid4 жыл бұрын
Ok 👍👍
@jonathanmackey32823 жыл бұрын
You can get the metal upgrade on eBay
@nurisdhihar19943 жыл бұрын
Boss mcm mana bukak connector cup b tu bila loose?saya pun allen key sudah patah dalam skru tu 😅
@yairc3 жыл бұрын
Adui...stress kena tu..hahaha..
@nurisdhihar19943 жыл бұрын
@@yairc bos guna drill ke ?
@dustinplee50673 жыл бұрын
im fixing to ordered the same spur gear you have from amazon prim and put it on my Quanum Vandal 1/10 4WD i have the plastic spur gear like you have and dont want to use it because i will strip it out itfirst run it is a brand new plastic spur gear i don't know what is about me but i can gear mesh metal a hell of a lot better then plastic
@89zaws4 жыл бұрын
Berbaloi ke x buggy ni? Dari segi ketahanan n handling.. recommend model ni atau recommend model lain? Tq
@yairc4 жыл бұрын
Bagi sy, model ni entry level ntuk yg nak berjinak ngan buggy. Ntuk ketahanan sy tak dpt banding dgn professional level buggy seperti sworks, kyosho dan sebagainya sbb sy belum pernah memiliki nya. Tapi model HSP ni sangat popular ntuk peminat casual. Spare parts dan upgrade parts senang di dapati dan dgn harga yg berpatutan.
@89zaws4 жыл бұрын
@@yairc nice.. so far ape part yang selalu rosak/patah? Ape pro n con model ni?
@yairc4 жыл бұрын
1st part sy tukar is the spur gear...ingatkan metal..rupa2 hard plastic. Dan selebih nya sy masih maintain part yg asal. Next upgrade kalau model ni, brushed motor. Nak kena upgrade ke brushless motor. Sbb motor asal ni memang slow. Ada video sy tentang pembandingan jenis battery ntuk stock motor dia. Check it out.
@ansargasang2113 жыл бұрын
Ok je bro.. brg mudah dpt.. aku pakai brushless . Setakat ni ok..cuma butterfly depan blkg bengkok..laju sgt kot
@yairc3 жыл бұрын
Hahaha..sy punya butterfly/shock tower juga dah upgrade ke yg tebal sikit. Dulu bengkok langar tong sampah..
@Jering464 жыл бұрын
Tq subs bos
@yairc4 жыл бұрын
No problem bro!!
@tahayt61424 жыл бұрын
U must be a bad driver how u strip your plastic diff spur and your pinion gear??
@yairc3 жыл бұрын
ya, i didn't check the gear mesh out of the box..too excited to play it.