2 hours later and I'm done! Didn't realise how much force I'd have to use at various stages. Thought I was going to rip the thing apart! Thanks for the video!
@ianbrackenbury263 жыл бұрын
Great video. I thought I was going to be forced into replacing the phone but this video helped me replace the battery and was easier than I thought it would be because of it. Thank you.
@simonafloat5 жыл бұрын
Thanks! Just changed my p9 battery, all working fine. It is very difficult removing the case though, much harder than it looks on your video
@TechnicalUstadji0074 жыл бұрын
How is your battery life
@Problems-qp2ud4 жыл бұрын
@@TechnicalUstadji007 huawei p9 known to eat battery. There's few tricks to help improve battery life : 1) never let battery go to 0% (fully discharge often). The same goes to car battery, if you leave them always 0%, later they dead.. 2) Dont let internal hdd space used more than 70%. This phone is fast, it wont go slow even at 80% used space, but it will consume battery.. Sorry my bad english. I'm changing my battery soon too, bought this used phone cheap from China and loving it ✌
@TechnicalUstadji0074 жыл бұрын
@@Problems-qp2ud thanks for your reply
@GigliolaValeria4 жыл бұрын
Thanks for the video! After a few tries I finally did it! I had to get lcd opening pliers to open the phone as I tried for many hours how it shows on the video and wasn't able to (that was the trickiest part). Also for that hair drier works to melt the adhesive! After that the other tricky part was unsticking the battery but it all seems working fine now, thanks!
@TechnicalUstadji0074 жыл бұрын
_**_ how is your battery life after replacing battery?
@GigliolaValeria4 жыл бұрын
@@TechnicalUstadji007 it took a couple of weeks to settle but now works like new!
@TechnicalUstadji0074 жыл бұрын
@@GigliolaValeria how much backup you get from a fully charged battery
@vintagesteelgarage4 жыл бұрын
Great simple video, helped me change my battery in 15 mins, thanks
@janobrocnik23964 жыл бұрын
Thank you for video. I've changed battery in my father's phone in few minutes.. 😀
@pauldvi3 жыл бұрын
Great instructional, thank you. Where can I get all the proper tools you are using including that work mat, please?
@grigorovivan3 жыл бұрын
The part with removing the battery from the adhesive is very messy in this video, I'd even say dangerous. First, you should try removing the original adhesives by pulling them carefully from the top - there are protruding edges left for this purpose. As this usually fails, you have to proceed with prying the battery out, but I couldn't stress enough that you should be extra careful with the two flex cables under it. They are especially easy to cut if you start prying from the side, as shown here, so you'd better start from the top, after removing the motherboard. Just check the other videos on P9 battery change, you'll get a better idea.
@BruceXuHasADream4 жыл бұрын
Isn’t it impossible to find a little torque screwdriver for their two little screws on the outside of the charging port??? I found one after 30 mins of asking ppl in my engineering lab, but then it didn’t work (budge the screws) after I tried to screw again once completed, so those TIIINY little screws are gonna have a hard time coming out the next time I try to switch battery or if my current one gives me problems
4 жыл бұрын
Great tutorial! Thank you - 1/2 h and you are done =)
@veganbodybuilding4 жыл бұрын
What is the type of adhesive tape you used on this project? My old P9 needs a new lease of life. I will give this a go and let you know how I get on.
@veganbodybuilding4 жыл бұрын
I bought Scotch double sided tape and it seems to work fine for the job. One issue not mentioned is when taking out the battery it can become super hot (like smoking hot), so have a couple of thicker materials rags available to grab the battery and help you transport the battery quickly outside (or somewhere safe). Apart from that and the tricky job of first cracking it open it was easy enough, even for a non-DIY type like myself. If you have no tools order a battery with all the screwdrivers etc as I got the exact ones for the job, so worth the extra 50p (pounds sterling) and the battery seems fine, the fingerprint works and it charges ok as well, so well worth the £5-ish it cost to do.
@valygarss4 жыл бұрын
@@veganbodybuilding Adhesive tape is not included with replacement battery?
@petergibbs80864 жыл бұрын
Hi, what is the screwdriver type and size, I can't find one small enough?
@laurenth71873 жыл бұрын
I was unable to do that, the phone staid in the case and i 've got only the screen out. The screen was glued to the case, when i get ride of the glue, then of course the screen came out... attached by it's ribbon. The phone not. So how do i pull the phone out .... ?????
@jazz._.9514 жыл бұрын
help when I tried the battery worked but when I put it in and tested it, the display wouldn't show up and would suddenly vibrate
@hathim44142 жыл бұрын
How much is the real battery in Hawaii
@hathim44142 жыл бұрын
bro huwai p9 eva-L19 phone
@ShoaibKhan-hd1sq3 жыл бұрын
Bahi yar ye kitne Ki battery ha
@mkkk89713 жыл бұрын
cracked my screen while trying to do this.
@EllasPOSEiDON4 жыл бұрын
Don't understand why you make harder life for yourself? Looks very non-logic step to put a new adhesive tape underneath the new battery. With the screwed on back it will stay in place very safely and would be much less trouble for future change. IMO.
@abdullahsohail46445 жыл бұрын
My new battery is not charging after installation
@simonafloat5 жыл бұрын
Abdullah Sohail mine was the same. It was the connector next to the battery connector. Make sure it is connected properly before you screw that metal plate back on.
@human35654 жыл бұрын
After removing battery phone will still keep all the information
@recovertec17594 жыл бұрын
Yes it will keep all the information
@icya.d59384 жыл бұрын
Help! When I turn on phone there is no display
@recovertec17594 жыл бұрын
If the phone comes on and there isnt display, u need a new lcd.
@icya.d59384 жыл бұрын
@@recovertec1759 the phone turns on and it goes from black to grey and then it flashes black and grey and then it gets stuck at grey