HUAWEI WATCH GT2 46 mm Latona Disassembly and Assembly Video Tutorial

[@Zai6]

Great video. Can you illustrate how to remove and replace the battery as this was not explored in the video

[@MsHichem2011]

Great video, very clear! I try to replace my screen following your video , after watching it al least 20 times :)

[@thavinmed7175]

How to replace screen

[@incemels]

This video have been really helpful.. save me a lot of time and money. Tq.

[@sakaki7803]

左上のネジが極めて強固でなめてしまいましたが、 その他の基盤取り付けネジの場所をこの動画で確認することで、 直すことができました。ありがとうございます。 The left-top screw was crushed, but by disassembling other screw bottom of basis, I could have repair my watch. Thanks for good video. 我压碎了左上的螺丝。 但是，我去掉了其他根据螺丝。 我能了修理，谢谢

[@jeromepierrot6930]

Thank you very much ! I've repaired my swatch !

[@renatosouza4790]

Great Video! I'll try to fix my Huawei GT2 alone with this tutorial. How I can identify the barometric pressure assembly of this watch? I need to fix it too.

[@quemyst]

Very good video. Used it to replace my screen recently. Now I found out I need new vibration motor. Ugh. 😢

[@marcingogowski6077]

Professional tutorial. Thank you!

[@abrew99]

Great video, I want to know how I could clean one of the buttons because somehow it became sticky and it doesn't makes that click when I press it.

[@jonyer1980]

Can you explain how to remove the battery?

[@muqtharthalangara1099]

From where i can buy the lcd replacement unit? Please reply Thank you

[@drcaiocerqueira8512]

Melhor tutorial. Deu certinho.

[@thedancingpandas8119]

The disassembly steps are very clear, thanks. Would you please disassemble the Amazfit Stratos 3? The entire Internet doesn’t even have a video of disassembling this watch. Thanks

[@vitordias4742]

Tks for the clear video. How to replace screen? New video is mandatory. Tks

[@KV89-b3c]

Great video. I changed broken screen, and now i get overheating error after couple of minutes. Any solutions?

[@sinbrad]

Yes, please indicate how to replace screen?

[@thiagocampospaixao]

Is necessary any special tool to replace the battery on GT2? Do you have a video?

[@cqgoh2820]

great stuff dude, just 1 question.. so the side button pcba comes with front panel?

[@avro04]

how to remove buttons flex cable? how to replace battery?

[@ДмитрийБорисыч-ш4й]

Здравствуйте! замену аккумулятора можно показать?

[@andy5530]

Is this the same procedure for the honor magic watch 2?

[@andy5530]

What the hell to do with Huawei watches you numpties

[@petrilock]

Alguna solucion a que el sensor no prenda y la bateria se caliente? ya reemplacé la bateria y sigue sucediendo eso.

[@drumamati]

This back cover have barometer sensor inside? I have a problem with barometer - after cleaning still show 0. The same with altimeter.

[@Cpt-Aragorn]

Which screwdriver did you use?

[@martinschmidt959]

Can you please tell me where I can get the BTB-Removal-tool?

[@eunicaaustria9695]

Where to buy water resistant ring please answer back thank you

[@utilisateurgoogle4425]

Hi dear I have issue with upper bottom I think after the last update

[@sweedieman3231]

Where is the vibration part? My watch stopped vibrating.

[@bigmama8511]

Where can i get the btb removal tool?

[@SalvatoreGattuccio]

Hi. I should fix the microphone. Where is it? wich element? Thank you!

[@ZZZZZZZ8382]

Amazing video! I replaced my display, but now my watch's battery is not working properly. Before, I could get 8-10 days with it, now I can't get 24 hours of usage before charging it. Does anybody knows what I did wrong and how can I fix it? Thanks

[@kankoku1228]

Does the waterproof still there after reassembled?

[@Lolipop0987]

I dont think so bro

[@ArtyArtur]

If you put a New o-ring, than yes.

[@midomixalove]

Same question 🤔

[@flokic4594]

Hi I looking for this vidéo for gt2e, when i finish, he dont turn on

[@randomlyspecific1824]

My GT2 front LCD just popped off, it is still attached somehow, a flat wire is holding the base and the front LCD together. And I noticed that the water resisistant ring broke apart already. Can you help me how to fix this? The video did not show how to disassemble the front LCD.

[@jonathanjuarez8524]

Qué medida usas para los desarmadores ??

[@06serkanful]

Vida uçlarına kaç mm lik tornavida kullaniyorsunuz

[@MrP7]

Size of the screwdriver torx ?

[@andreyg1236]

T2

[@RomeoCr]

Hi.What size is hexagon screwdriver?

[@arnoldezsray2815]

Same question

[@mohanpraveen3669]

Speaker stopped working. Please help

[@toshgun23]

Thanks for the video! Could anyone tell me, what can be wrong if honor magic watch 2 turns off automaticly after showing an error message about overheating?

[@eccomi21]

It overheats

[@maciejw-sky9118]

Hello, can you tell/show we which part is responsible for vibrations? Sometimes It's not working.

[@Rydeg.]

Same for me, did you fix it?

[@martygleso6841]

Hi, I've done all this, replaced the lcd screen, now the device won't turn on, any ideas please?

[@DJ-DFOP3]

Do you know the battery model?

[@drumamati]

Does anyone know where's barometer sensor?

[@danielandresleonromero4563]

Hola a todos. En algunos repuestos no es necesario desmontar la parte de la pantalla, pues este ya cuenta con los marcos necesarios. Por otra parte, ¿como podría mantener el sellado hermético una vez destapado? ¿Con un nuevo empaque? y dónde lo consigo? o con algún tipo de pegante o adhesivo?

[@bismarckmurillo1969]

Estoy justo en lo mismo, necesito reemplazar el empaque...

[@yedinsonrojastorres8782]

Donde lo compro el displey

[@carlos6379]

The battery?

[@fotosnajper]

Thank you !

[@ahmadalsakran1295]

I have a Huawei watch GT2 The watch does not work, and there is a red light at the bottom of the watch that works continuously. what's the problem

[@Haxiuuu]

How do I replace the screen?

[@saulmontanez]

has anyone flash this devices? got one bricked on installing software

[@ks5397]

Just gone through all this to find out the new screen I ordered is faulty. Ha

[@carlossalas3660]

Excelente

[@nomenboubouchi1842]

Bonjour Vous n'avez pas montré comment enlever la partie écran...

[@vjanda1]

I didn't use my gt2 pro for 3 weeks. Now it won't charge or turn on. Help please!

[@Alanedu1000]

Same problem. Did you manage to fix it?

[@vjanda1]

@@Alanedu1000 no. once they go there's a small chance of fixing them because of complex internal design

[@AV-xd8yo]

likely the BMS undervoltage protection circuit is preventing it from charging n turning on. same thing happened with old iphones. u can try warming it up so the voltage increases a little and the undervoltage protection circuit disconnects. let it soak the heat for some time. if it doesnt work, u can try disassembling it and changing the battery or just charging it (with 3.7VDC). consider getting a new seal as well if it turns on

[@vjanda1]

@@AV-xd8yo Thanks for the advice. I'll heat it up with a hairdryer and report back.

[@pasinduelectronic1955]

my watch over hiting and not chagering

[@dejanlaketic4518]

Hello. I did it. I changed the display and now buy starting only huawei logo apears and after that is dead. I tryed it a bunch of times. Everytime the same thing happens. Does anyone has any clue what should i do?

[@Dakoo]

Imam isti problem,ali ekran nije mjenjan. Kada stavim sat na punjac pojavi se huawei natpis stoji par sekundi i nestane.... Da li si to rjesio problem?

[@foxter80]

How much a mew screen costs??

[@BDng1]

Does not help me. I have dust under the screen.

[@techniciangps3989]

Sir i have huawei p30 pro with wach yesterday i was installed new face wach then that's wach can't open again please help me what can i do and how to format GT watch plz

[@daz.r1994]

my fat fingers cannot do this job.

[@karatekungfu2404]

I lost my screen, anybody help me plz.

[@ekaraj]

thank you

[@diodacbd]

trash

[@BestVideosSkynet]

What is the size of hexagon scew ?