Huge DIY snake rack in under 20 minutes

Morph Market: www.morphmarke...
Email: [e-mail]
Instagram: @LucasLandonRoyals
Facebook: Lucas Landon
Music:
Lights by Sappheiros / sappheirosmusic
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
creativecommons....
Music promoted by Audio Library • Lights - Sappheiros (N...
Me & You by MusicbyAden / musicbyaden
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/_me-and...
Music promoted by Audio Library • Me & You - MusicbyAden...

[@GeekyGeckoCreations]

Out did yourself once again, about to build a rack and this video helped so much!

[@LucasLandonRoyals]

Thanks! Feel free to reach out if you have questions

[@sspyder181]

That was Boss cutting in the parking lot. I am building a 12 high fb40 again, going to use my router and cut 1/2 inch dattos to seat the shelves in snug and use pvc glue instead of screws to weld the pvc to itself. Should look nice and clean. I have found routing all the heat tape grooves and dattos for shelves are much easier when the sheet is full and not ripped down. Send you a pic when I'm done.

[@BBMReptilesPR]

You are the master of Snake rack builds..History Channel should do a series on your channel, call if "Forged in PVC" lol..you the man Kai!!

[@LucasLandonRoyals]

Haha. The racks would melt. I would love to learn how to forge especially if I get to make awesome historical weapons.

[@Red-357]

This is awesome. Love watching your DIY snake rack videos. It’s inspiring

[@the6ixconstrictors424]

Very nice Kai!! Thanks for sharing this video in "Snake Rack Builds 4 You" in facebook.

[@LucasLandonRoyals]

Of course!

[@SwingingPythons]

you do great work.. I like the pride you put into it.. using home depot parking lot was a smart idea.. Now I just need a portable circular saw..

[@LucasLandonRoyals]

Get some cordless tools. They're worth the extra cost over corded tools.

[@SwingingPythons]

@@LucasLandonRoyals I’ve switched everything else over but the saw. I’m not sure I use it enough to justify the cost but I am envious.

[@ApexRoyals]

I'm in NJ and I'm new and I've been following your instructions on these videos closely so if there's any details you think could be improved upon before ordering all of the supplies please let us know.

[@daviddibble2879]

How do you determine the exact spot to drill in the side screws into the shelves. I’ve gone too high or low before

[@LucasLandonRoyals]

I just eyeball it. You may want to measure and mark where to screw.

[@urbanconstrictors.]

Nice work Kai! Looks great

[@DEAexotics]

looks really good thanks for sharing

[@nathanaelpalmer1549]

Where do you get your casters? Also, what are the advantages in using a round headed screw? Love the channel!

[@LucasLandonRoyals]

All the materials were purchased at home depot. Screw heads that are beveled and flat are made to sink under the material surface. The dome head Screws are for sitting above the materials surface. The wider the diameter of the screw the more it spread out the pressure.

[@millerhighexotics6178]

How many thermostats do you have controlling 72 tubs?

[@LucasLandonRoyals]

1 thermostat for every 2 levels

[@colemancoclips9522]

Do you still use the STC-1000 temperature controller units? If so how well do they last and how have they worked for you?

[@LucasLandonRoyals]

I have approximately 50 units running. They do a great job. Over the years there has been 1 that stopped working. At $15 each, it was easy to replace

[@richcorbett6491]

Happy new year enjoy

[@LucasLandonRoyals]

Thanks 😊 🙏

[@carlosrlopez1987]

why cant I find pvc sheets at my local home depots?? i live in california

[@keithfaulkner6319]

Home depot doesn't carry pvc in chicagoland either. Try Menards.

[@guyolson9978]

First, nice video!!!

[@timgibbs9198]

Awesome Kai. I cant wait to get to be able to build a rack like this one. Thank you so much