HUGE Electronic 12V92 DDEC Haul Truck Engine!

I'm always looking for old classic semi trucks to save and restore. I'm also always looking for trucks or parts Detroit Diesel related. If you have one that needs to be saved or you know of one you can drop me an email at the following address: [e-mail]
Be sure to check out our website ol2stroker.com for truck parts and merch!

[@SeymourBalz]

All this young guys get excited about 71's or 92's they need to see a 149 !

[@Joe-tu5qw]

We got to work on a 110. While not as big as a 149, but was more rare.

[@DanEBoyd]

It ain't Friday Night without O2S!!!!!

[@zackfalgoust3822]

Hey Wayne’O bud first off she sounds minty af and second thanks for another great vidya wouldn’t be a Friday without a O2S vid. But on a serious note an believed you me I’m not a Detroit mechanic atall but the shop I work at works on Detroit and if I’m not mistaken the split block DDEC’s run on the back block of cylinder under a certain RPM and load percentage then bring in the other block once she meets that threshold. I round about 87.2 repeating % sure about that I know 100% that’s true for 16v92 DDEC’s but like I said not positive if that applies to all the split block DDEC’s. If that’s the case though then that’d explain why the fronter manifold is ice cold when you first start er up. Anyway thanks for givin a fella something to drink a beer too on his Friday evening. Stay minty buddeeh.

[@nicholaspiscitelli7685]

We all love you as long as you don't drink Budweiser😡

[@jasonmyers3847]

I want to throw Capt. Walnut's stick while you work. Lol

[@diarrhea_fart]

I'm glad I found this channel all that time ago. Detroits happen to be my favorite diesel engines. great work on the videos by the by

[@GarnettM]

Wayne Here`s a few head shakers for ya sorry for long stories Tales of the trade right -- I remember digging into a 76 - 359 Pete looking for the reason for why the tail lights were staying on opened the dash all white wires like this WTH , Couldn`t find a damn thing wrong looking around all over it- Only to find out after 3 hrs of this shxt , The owner that ran it before me had put a tiny rubber band on the brake Spike which fell down into a groove and would hold the current open Oh I was fxxking livid by this time ; Same owner that didn`t feel a rough ride heading to get a load of gravel getting there realizing after he walks back to me saying we have to get the steer tires balanced I go looking for a separation on a tire find the air bag cones had busted center bolt from running flat. - Gets even worse We get hired on to haul asphalt for a paving crew I`m in a Daytime cab hotter then FK Pete with a Jimmy - He`s got the Granny rig 91 Western Star Bunk AC Peerless trailer so I weld in some shute plates in the end dumps for making rows right spent a day doing that ,He`s the first truck in the morning 7:30 am we get loaded drive 10 miles get to the kicker girl at the paver she motions to lift ready to dump he`s full erect I`m behind him watching - I no sooner grab the Mic to say Holy Shxt Dennis Hang on that GD trailer tipped over on the the new hard top making a hole from the corner so deep shut down 25 trucks till noon twisted the shxt out of that frame then the pin let go - You know we went looking for that pin from the end dump it had shattered into fragments everywhere - (It was on a Peerless Trailer ) I decided to go long haul after that crap 12 yrs across Canada - Montreal to Inuvik -Vancouver -and Heavy Cat Loved it Retired now .Runs Good Nothing a few Rev`s won`t clear up .

[@charlesangell_bulmtl]

15K hrs? Why, that 'ol girl' is 'prime'. I've heard tell of 30K hrs on vegetable oil. Don't know particulars of maintenance and # of rebuilds, but... Late 70s My Dad had a 2-71 came out of an Allis crawler from a junkyard had 13k hours ... Clock was broke tho ... He smirked when listening to local farmer brag his JD had 7K hrs ... Another instance, a friend of my dad's talked a man into getting rid of his propane MM powered irrigation pump for a Detroit powered set up. It was easier on fuel and wasn't prone to cracked heads and valve issues ... $$$ We lived about a quarter mile from the river, could hear that Detroit, summer after summer singing it's song😊

[@ThePaulv12]

Still sounds like there's a cylinder or 2 down Wayne. On vid you can hear the chugging at the end when you rev it up. Have a listen. You probably can't hear it standing there but from one mechanic to another I can hear it.

[@samuel_towle]

It's a good day when you can sit back and listen to a buzzin' dozen. Your dogs know when your getting stressed out. They are like, "Stop that and play with us. We'll cheer you up."

[@brentlance2379]

So.. is the ecu wiring prettt standard on 92 series engines.. i have two ex military 8v92 in crates.. ddec motors.. at some point..when i find something to stuff them into.. ima need to know what wires r for what

[@Ol2Stroker]

Yes they are.

[@BuckInchuteranch1]

When I went to UTI in Phoenix in the 90’s we got to tune an old 16V96. Fun setting all those injectors😂😂

[@fullraph]

Wayne, my man, you need one of these plastic folding tables when carrying out experiments like that. Trust me, it's a game changer. Beats working on the ground any days lol!

[@jasonbirch1182]

"unburdened by genius" ; Wayne, working on junk 2023🤣😂

[@supercuda1950]

You gotta love the sound of a Detroit unless you are deaf. That engine is impressive. Thanks for the video.

[@wildcoyote34]

AMEN for sure , the most wonderful sound there is ,,nothing like the sound of a 12V92 with twin turbos climbing a 12 percent grade pulling 50 tons

[@DanEBoyd]

Be careful using LEDs in Check Engine Light sockets, as at least some older ECUs will react unfavorably. How about that engine in the Louisville??

[@mattprater7184]

i was happy to see our favorite keeper of the cool detroit engines got another big motor get to come out of it slumber and sound really good after wayne's hard work

[@danielseelye6005]

12:21 "You have stolen my dreams and my childhood!" You're welcome, you histrionic slag puppet. 😁

[@henrivandenbrink4163]

Hey Wayne can you do a video on the Caddilac? Thanks

[@richardlibbey8493]

Wow the VT plate caught my eye. I lived in Bennington and worked as a mechanic for REA Express in Albany in 1964 until 1970 when I went with M&G Convoy in Selkirk. Yeah, I'm older than dirt.

[@jkmcp45]

I just switched engines in my crane I took a whooped mech 12 v92 out and installed a Ddeck 12v92 in we had a nightmare getting the injectors or I should say getting them unstuck and old injectors were junk well not junk let’s say they are good as new now and she’s in my bycrus Erie 71 b and is running a5-6 yd dragline well scary how much harder it pulls now first day I almost pulled crane into settling pond cause gobs the cranes mech gobs were wide no they were closed so it hits hard 0- WOT instantly I still luv my mountain find and is best way to muck our pound at quarry good luck brother I have I more that’s going into a old Pete has a windowed 12v92 which has triple factory frames and three transmission s which is a 20 speed plus aux box crazy heavy duty truck my grandfather bought back late 60s early 70s

[@Ol2Stroker]

Boy I'd sure love to see that old Pete! Email me some pics! Sounds like you've got one helluva crane!

[@goodoledays1355]

What a treat Wayne, great video? Dare I say, that motor would be freakin mint in the race truck, just saying!!!👌🍻

[@troyleopold4700]

I got my hands on one but I need to wire it up same thing the wires are cut engine side is fine been trying to find a wiring diagram or electronic controls manual for it

[@jasonlucas9991]

You've got the knowledge of a 50 year old deisel fiter!,Explain Your self

[@scotelliott8577]

Breakfast beer and 2 stroke detroits is the best way to start your day. Fun stuff Wayne. Saturday morning ol 2 stroker videos?? Nothing better. Happy earth day. How dare you!!!! F em

[@danielrenovetz5721]

Awesome mechanic/ electrician . I think you had all the codes in that harness of wires memorized in your head, enabling you to read codes , hook up all necessary to get it running in 28 minutes. Wondered why you were even thinking about messing around with the turbo's at the start, as removing exhaust manifolds are a good trouble shooting tool on these weird engines. I like your "stand up" throttle control, copied from old DIVCO milk delivery trucks. I learned about your gee-whiz electrical ability when you fixed the AC operation in our first gen Dodge 10 years ago . No job too big, or too small ! I love you, Wayne ! Lucky to call you a friend !.

[@Ol2Stroker]

Thanks brother! That's the pedal you gave me making it all happen! You've been a great friend and mentor Dan!

[@sleepervega71hill28]

Good morning Wayne. Like Yosemite Sam! Pounding the dynamite into the hole to get roadrunner or oil! But! You gotta put a biscuit in the hole before breakfast beer. 😆

[@cordcd7]

Wait. I need to crack open another cold snack for this. Don’t worry. I don’t drink that h0m0 beer butt light!

[@leoaguilar4480]

Check in the parameters there is a cold engine function that will cut off cylinders till it reaches Temp

[@alan6832]

BUMP! don't miss this one!

[@Ol2Stroker]

Interesting.

[@onyxpartitian]

Fun fact, the EMD 16 cylinder engines use the same DDEC ECM's.

[@AllianceB95]

For Earth Day i fueled the ol Toyota up with 5W40 oil (5L and 52L of diesel) drove 350 miles to buy some coal go back home.. spritz some WD40 into wood light up the barrel with that WD40 wood.. threw them coals in there and burned all the cardboard junk i piled up for months. All in all it was a Smokey day... The Toyota smoked like crazy the fire did the same and it was fun. Buuut not as fun as a Detroit Diesel. Great Engine and video Wayne! Greetz from The Netherlands, Bjorn

[@calvinevans8305]

Gotta shoe horn that thing into a Prius for Greta. Lol

[@davidsimons6881]

Cannot wait to see what you do with this one Wayne.

[@bensymington5550]

❤❤ I love your videos awesome con tent

[@free_electron]

Thumbs up earned because of Jimmy!

[@djpar3492]

Why's the wife got bigger arms than you bud??? Ha..

[@Ol2Stroker]

Lol she's a ripper!

[@genesmith7151]

Now you need to build a truck around that engine! 😅 Can anyone say "HEAVY HAUL!" 🤣

[@richardhoneywell7411]

Great video Wayne sounds pretty good after you unstuck the injectors . Looking forward to your next video stay safe Wayne.

[@jesseivers80]

Be nice to the dogs not Walnut!! Lol they just wanna help you😊

[@Ol2Stroker]

Jimmy is the best helper!

[@diesellivesmatter]

I think it's cute you thought 2 batteries would start it. Good video keep em coming I like seeing the ddec since I've never seen them before.

[@russellking9762]

Me too…have you seen the 8V92 DDEC on another guys YT Channel its actually in the truck running going on a test drive….sweeeet…look for it if you haven’t seen it

[@minnesotatomcat]

She leapt to life like frogs in a dynamite pond 👍

[@nervouswreck392]

Buzzun dozzen‼️✔️

[@Huntinghogs]

That thing sounds pretty healthy.

[@conleycrew76]

When’s the video on that sweet caddy behind you coming out

[@Ol2Stroker]

Ehhhhh i dunno

[@mjmcomputers]

Would be funny to take this to a show and have it power a small ice cream churner. Greta would love that.

[@nicholaspiscitelli7685]

W D 40 As a starting fluid

[@adrianhowley7754]

Love all your content bud! Keep up the hard work and mesmerizing knowledge of so called junk😂🤙

[@JimBronson]

I'd like to see this in an extra long nose Peterbilt or KW

[@Ol2Stroker]

Me too!

[@GIGABACHI]

2 Smokes may not make as much power as the newer four strokes but they still sound way better. 🤘

[@theq4602]

I think with some careful tinkering and upgrades they can do just as well.

[@stansdds]

It is good to see a new video, Wayne. When you gonna do another one on Bertha (Pete 352)? By the way, I completely forgot about Earth Day. It's not the sort of day I normally celebrate, although a couple of times I did turn on every TV and every light and in and on my house to celebrate Earth Day. I might have run the HVAC system with all the windows open too. 😄

[@billchasser8978]

I can’t get beyond the old CAT yellow paint

[@tiesco]

Over Speed 3200RPM I want hear that thing rev up to 3200 rpm 😂😂😂😂

[@wes11bravo]

In honor of Earth Day, let me just reiterate: HOW DARE YOU!

[@wildcoyote34]

oh goody a DDEC engine ,, i've got a 12V92 TA in a modified peterbilt 359 ,, frigging thing has more power than it can ever use even with 3 drive axles and a powered steer ,,i can still turn all my tires if whatever i am pulling won't move, ,mine is a NON DDEC engine ,, thankfully

[@Ol2Stroker]

No way! Send me some pics that's badass!

[@wildcoyote34]

@@Ol2Stroker i'll have to see if i can find a camera that'll do it justice ,,,it's an old oilfield truck that spent it's life in texas and north dakota up until 2003 when i bought it ,and i've used it for hauling farm equipment and the occasional stump removal ,, frigging thing is about as ugly as that old race truck ,,and slow as hell too

[@Ol2Stroker]

@@wildcoyote34 prolly oughta just sell it to me then. Lol

[@73Datsun180B]

oh but people assure me 4 strokes are more powerful lol

[@wildcoyote34]

@@73Datsun180B 4 strokes are much more efficient not necessarily more powerful ,,4 stroke engines are more forgiving and have a lot fewer parts ,most truck engines even huge 18 liter ones are generally only 6 cylinders

[@calumanderson5617]

Thank you for the video Wayne👍 I'm guessing the dog's Jimmy was trying to rimind you about the movie Lethal weapon when it came to wires, and Jacob the black Lab/retriever was drinking Bud light especially trying to make out with Jimmy. 😬

[@Ol2Stroker]

🤣🤣🤣🤣

[@alan6832]

@@Ol2Stroker Ignore those Taliban before they follow their fellows and call you metrosexual for shaving, and having friends who work in Northampton MA., where InBev will become more available. You shave more than I do, though I'll grab the pink Crocs at Goodwill if they're out of blue ones. BTW Greta has never criticized repair and reuse that I know of, and many buses use 2 strokes. She didn't write Cash for Clunkers. This big engine might be perfectly green if it served many people, or does in the future, or sees few hours in a collection, or teaches many how to repair and reuse stuff, fix old buses and carpool etc. Don't megatrucks haul windmills? Turnpike doubles near you? over the Birkshires? to Northampton?

[@alan6832]

@@Ol2Stroker Thought so. Could this engine do this? Greta approved? kzbin.info/www/bejne/pqWsXqZqrc11jMk

[@SOU6900]

I swear I saw that engine in the thumbnail, and thought it was a Cat. Honestly I thought it was just the 6V92 and 8V92 that had DDEC on them. I'm surprised by how good it sounded when you had it running on just 3 or 6 cylinders too, or however many she was running on originally.

[@sleepervega71hill28]

hey Wayne. Don't suppose that Detroit would fit in a Prius. Huhhh? 😂

[@jerryglascock1194]

Please keep doing what you're doing bro.

[@lachlanzunker7987]

The mrs sounded a bit keen on giving her the Cosby sauce been watching too much zipties aye

[@Beersandbrakeclean]

Lmao on the naturdays being gay way before that guy put his face on the BL can. Been drinking them since they came out and I can confirm they’re pretty gay, but very tasty!

[@American_Jeeper]

Don’t forget to get rid of that Shitty Kitty Cat Yellow and paint it Alpine Green.

[@sandasturner9529]

There's people out here that'll pay good money for a 12v92

[@derrickwilkie5611]

Drop that beast in the 352 rails be a sweet truck there Wayne

[@ericlakota1847]

I love Detroit and hate them in skiders I ran Detroit was always the best start engin in the cold

[@bigmacmach1185]

When will there be some more videos on the 73 12v71 cabover?

[@Ol2Stroker]

That poor thing is lonely. I haven't touched it all year 😢

[@bigmacmach1185]

@@Ol2Stroker lol, understandable as busy as you are, but definitely looking forward to more of those.

[@Ol2Stroker]

@@bigmacmach1185 I am too. I feel real bad for neglecting my favorite truck. 😢

[@hilleryclifford1350]

You just went legend my brother….. that 16V better be a part of a future restoration/ repower on one of your restorations!!

[@larrywalker7759]

16V? Did I miss something?

[@danielseelye6005]

​@@larrywalker7759 No, he did.

[@Drew_379]

It's a 12V 92 is what they're trying to say

[@hilleryclifford1350]

@@larrywalker7759 no you didn’t miss something my bro, James does have a 16V gen set that they got fired up a few episodes back. My bad I can see where the confusion is. This DDEC TT V12 will be awesome, Again my apologies to you my friend

[@larrywalker7759]

@@hilleryclifford1350 The 16V genset I saw in the video library is a 16V149. So I understand that was what you were referring to.

[@detroitdiesel7074]

Bummer she got cut up, prolly was a sweet ol girl with that 12v92 innit

[@colebertils7359]

What a glorious machine! Imagine stuffing that in a truck

[@ericlakota1847]

I drove buy you a few times are you right before the king bridge

[@carlosbelizario5360]

Which truck is it equipped on? good job!

[@mrfloor1845]

When was the last time you updated your computer?

[@richardharmon4112]

Where are the "workin' on junk" stickers at???,

[@wonjat5]

Good day Wayne, a brilliant bit of work to get it going. Doesn’t seem in too bad a shape either. Hope you can do something with it.🇦🇺

[@neilharvey1602]

What are you going to do with that engine? Be good to put it back to work

[@eddieweigel9490]

WOW didn’t know a buzzin duzzin is electronic

[@James-qr6rp]

Have you ever had a run away with one of these types of engines

[@noka55]

U should put this engine in something that it has no reason being in😂

[@dwightcorbett8889]

Awesome, didn't take too much to get her running. So what's your plan for it?

[@7seriesmax]

That’s a dream engine. I hope you put that in a frame and use it. I always wanted to put a 12V92 in a mid-1920s Lincoln. Or better yet mid mount it in a school bus.

[@alan6832]

Greta would object to that application, as she would not object to the repair of the engine or to most of his activities as he seems to believe, with the exception of the race truck. But an engine that large needs a large application, at least 18 wheels if not more, or bulldozer, large tractor, marine or railroad, hopefully with less idling than the previous owner, which is not his fault. Even with the race truck, one might ask, how many people like me don't bother building a race truck because they can watch one on KZbin instead? and does that make a KZbin race truck green? Greta likes buses and many buses are 2 stroke, though I see no such buses here. It is mostly buses and RVs that bring my interest; and the moving vans that can help us all move among politically allied neighbors. Anyway, he is greener than he thinks.

[@rolandtamaccio3285]

Well, its handled 32 hundred RPM before .

[@charlesangell_bulmtl]

That Cadillac ... when GM was still making solid cars

[@BillyJ57]

think with your dipstick Jimmy.....

[@MY-bw2nb]

So you can now use it as a support engine for a EV lol

[@chrishunter5041]

Two questions, what truck are putting the V12 in? and when will the Bud advert air staring your Dogs😂

[@Ol2Stroker]

🤣🤣🤣🤣

[@phillipgarrow2297]

Peg would be proud of you

[@sleepervega71hill28]

Sorry wrong cartoon. Buggsbunny

[@Delbert127]

To the mother board bitches I love it

[@jonmarshall64]

@ol2stroker you really need to send this my way so I can put it in my 71 IH 4070A.....

[@Ol2Stroker]

That'd wake it up for sure!!

[@jonmarshall64]

@Ol2Stroker I've got a 8v92 in the corner for it, but she's really begging for a 12v

[@jonmarshall64]

@@Ol2Stroker what ever happened to this engine?

[@Ol2Stroker]

@@jonmarshall64 ive still got it

[@jonmarshall64]

@@Ol2Stroker want to trade or sell it??? Lmao

[@deborahchesser7375]

The original modular engine

[@richardlibbey8493]

Love the sound of those ole 2 strokers.

[@Quadrajettison]

that is one smokey old diesel

[@chuckvanvleet1268]

It's the wrong color

[@phillipgarrow2297]

Cat yellow paint needs to go

[@TheLonelyCowboy1958]

Just a reminder, aircleaner for the electronically fired 12v-92. im glad i found this channel, i plan on droppin either 3-53 in a lawn tractor, a 4-53 in a squarebody S-10, or a 6v-53 in a chevy dually. oh, and i've wondered this, why dont the old two stroke detroits have glow plugs? im just curious bout that

[@Ol2Stroker]

They used ether as a cold start aid back then. There was no glow plugs.

[@TheLonelyCowboy1958]

@@Ol2Stroker okay, that makes sense. Thank ya, n keep doin what you do. awesome entertainment for sure.

[@philosophyoftrucking]

Hi, Wayne. I’m trying to find out if I can hook an ELD up to a DDEC 8v92 before I move forward with putting the project together. Is that something you could help me with?

[@vinhly7530]

Engine Non-Turbo

[@jc-pj3nh]

Make a nice rat rod.

[@rexgratteaux8655]

Wayne brother yer back!!! Alright the almighty 12V92 ,NICE !!! DDEC TOO

[@bobg3034]

Needs turbos please!!

[@villainjohnnoel8075]

Hi from France, i worked for a in Australia who only ran 6V92's in Kenworth's. I love your chanel, but unfortunatly i'm not a big Detriot Diesel fan,i drove them for years, big on oil consumption,not the most powerfull engine,but hey i've got an open mind,wouldn't mind driving it,might be interesting. Great chanel by the way.