HUINA 1570 EXCAVATOR UPGRADE TO STRONG SERVO ARM

[@he214abc]

where is stoppers ?

[@youdt999]

정보 감사 진정한 금손입니다. 구독과 추천 박습니다.

[@toolxtoy]

시청과 좋은 말씀 감사합니다.

[@pnwRC.]

Great video! I have a converted Huina that run on a system like this. In a month, or 2 I'll have video of it hard at work at one of our clubs gatherings. Although still not able to work as hard as the hydraulic versions, it at least can lift a bucket of dirt now!

[@toolxtoy]

Thank you for watching ~

[@ddd228]

LOOK OUT! That Dremel blade can remove a finger! Use a vice. Maybe the same procedure for the 550 and the 1592?

[@toolxtoy]

Thank you for your worries. I will use a vice. I think 550 or 1592 excavator needs a same procedure too.

[@ddd228]

@@toolxtoy WAY too many injuries to count!

[@ddd228]

@@toolxtoy My 1592 id TOO weak to dig! Need upgrades.

[@toolxtoy]

@@ddd228 I think All work is possible with a nipper instead of Dremel blade for safety.

[@romildoavila8708]

This main arm electronic board is not used. after installing the servos?

[@ParlindunganLindung-z2s]

Belanja sperpat huina di mana bang

[@rcpomalaaid]

like video 👍👍👍

[@NGorso1]

If you would add pulling springs right next to the servos, wouldn't it carry almost twice the weight? Since the way don't it is allways helped by it's own weight?

[@toolxtoy]

Thank you for watching and your good advice.

[@ddd228]

That is an unusual modification! Please explain that.

[@TititititititititiT]

U should install Weight in the engine room. real excavator has very heavy engine room for balance

[@toolxtoy]

Thanky for your good advice~

[@lanayusuf5013]

Yang Indonesia like'

[@edsonnunesdemedeiros9206]

Show de bola parabéns pelo trabalho você faz atuador de escavadeira huinna 1550 ou conhece alguém que possa fazer??? Obrigado

[@toolxtoy]

you can buy actuators at aliexpress.com.

[@edsonnunesdemedeiros9206]

@@toolxtoy ok obrigado pela atenção

[@MaiconKrewer]

Alguém tem o link desses atuadores,já procurei e não achei, obrigado

[@Frank-o8h]

did you install a limit switch?

[@toolxtoy]

No. I didn't install a limit switch. Thank you

[@dynamicrcworld748]

업그레이드 영상은 처음 봅니다... 많이 배웠습니다 영상 좋아요!!

[@toolxtoy]

시청해주셔서 감사합니다~~~

[@rc-diy7864]

Wow, good job Rc excavator 👏👍

[@rckoreateam6315]

1550 개조 교과서 같습니다 굿굿납땜하시고 전기테이프보단 수축튜브 쓰세요 강추입니다^^

[@toolxtoy]

감사합니다~~~ 1570은 580 산후로는 파워도 약하고 해서 거의 가지고 놀지 않았는데 갑자기 생각이나서 잘못하지만 힘들게 개조했네요. 수축튜브가 어디있나 못찾겠더라구요 ㅜㅜ 라이터하고 많이 사놔야겠어요~~^^

[@rckoreateam6315]

@@toolxtoy 네이버에 수축튜브 검색하시면 많이있거든요 짤라서쓰는걸로 사세요 ^^ 저는 3미리전후쓰는거깃같아요^^

[@toolxtoy]

@@rckoreateam6315 감사합니다. 검색해볼께요~~~

[@elninospider]

Dónde puedo conseguir los reemplazos del brazo hidráulico 😢Kiero modificar el mío también 🥹🥺 Alguien me diga plis

[@astidianadian4598]

bang lu beli arm Serfo nya di mana

[@alex_9384-l1s]

Caramba, estou impressionado 😱😱😱👏👏👏👏 parabéns 👍.

[@sugengriyadi7184]

toko online indo gak da ?

[@jerryebner159]

will this work on a huina 1552

[@toolxtoy]

I think this work will be possible on huina 1550 1592. I don't know 1552 version. 1552 right?

[@GustavoIzidioTOP1]

Do you know the voltage of these actuators?

[@acemomo77]

More video brother.....

[@davesilvia9711]

will this work on the top race version?

[@toolxtoy]

Thank you for watching. I didn't buy top race version but I think it wll work on the top race version because of very similar structure and size.

[@mansasak]

Arm apa nma.ya itu min yang dipke itu

[@minitoyfamily]

I like your video ❤❤🎉

[@budakkampung7061]

Mantap bang

[@val1000r]

💪👏👏👏

[@cat-cambodia1801]

Good job 👍😊👍

[@kimminseok114]

저기혹시이거선이짧아서요 그거어떻게해야되요?

[@toolxtoy]

전선이 짧으면 유사한 전선 구하거나 또는 네이버 같은데서 구매한 후 잘라서 납땜 등으로 연장해줘야 될것 같아요.

[@dcfphilrc5832]

Very nice

[@개백구-w9w]

잘 만들었어요 ~추천 꾸욱 그러나 아직 구매 안하신분들은 그냥 593을 사세요 ㅠㅠ 업글 비용에 592면 593이 더 싸게 먹혀요 ㅠㅠ

[@toolxtoy]

네. 맞는 말씀이세요~~~ 업그레이드하는거 쉽지 않아요~~~

[@alexandertarazona2509]

Buenos días donde puedo conseguir esos motores y como se llaman

[@toolxtoy]

Thank you for watching. maybe It calls "Main Arm Second Arm Bucket Arm Driving Rod With Servo" and I think you can find It at www.aliexpress.com

[@balikpapanhondaclub3453]

verygood

[@toolxtoy]

Thank you for watching.

[@성악_설]

혹시 파실 생각은 없으세요? (고냥 한번 물어 보았어요 죄송합니다)

[@toolxtoy]

죄송해요~제가 가지고 놀려고 그냥 허접하게 변경한거라 ㅎㅎ, 관심과 시청해주셔 감사합니다. 앞으로도 종종 놀러오세요~^^

[@doctorsyphus5819]

How much was it I can’t find it it only take me to the site not the item I don’t want to buy the wrong one

[@toolxtoy]

Thank you for watching. You can find "3 Pcs DIY Upgrade Metal Arm Driving Servo Parts For HUINA 1550 RC Crawler Car 15CH 2.4G 1:14 RC Metal Excavator Metal Arm Part" at aliexpress.com. I guess it was about 31 USD. good luck. friend~~

[@고현우-k3y]

질문하나 드려도 될까요?? 후이나 1580정도면 혼자놀기 좋나요??힘이 약할까봐 걱정이네요 ㅠㅠ가격은 그래도 꽤 되던데

[@toolxtoy]

가격이 다소 높죠. 유압방식은 아니지만 스크류 방식이라 장난감치고는 힘도 어느정도 있고 혼자가지고 놀기는 괜찮을거 같은데 가격이 싸진않으니 잘결정하세요.

[@BunLeng-ek2cx]

How much does a servo cost

[@toolxtoy]

Thank you for watching.maybe It is about 32 USD at aliexpress.com or 44 USD at ebay.com~~

[@PaulJones-bo8gt]

It cost will cost around 50 to 60 bucks

[@OniMikeVision85]

Dope will you do mine? How much?

[@toolxtoy]

Thank you for watching. I'm Sorry. It's my hobby work~.

[@OniMikeVision85]

@@toolxtoy I know just wish i could do this lol awesome upgrade

[@NguyenTran-zk1cu]

Các bạn chơi huina1550 thì ko nên ..hãy cô găn mua huina 1593 ..các bạn được chơi tron vẹn và vui như may suc thật..tôi khuyên chân thành

[@MAX-gt7dm]

한가지 질문합니다. 10분 13초쯤에나오는 무게추는 뭐라고 검색해야할까요??

[@toolxtoy]

Naver에서 휠발란스납 또는 붙이는납 이라고 검색하시면 나올거예요~~

[@MAX-gt7dm]

고맙습니다. 정말 빠르시네요!!

[@jerryebner159]

will this work on a Huina 1592

[@toolxtoy]

Thank you for watching~. I think this work can apply on 1550 or 1592 too.