Huina Bulldozer Evaluation Test vs Modified RCs

[@SoulG03]

Fantastic! Simple and too the point. Great reviews! Love the mods.

[@obeesrcconstruction9279]

Thanks

[@granitestater836]

HEY MAN I REALISE YOU DID THIS A DFEW YEARS AGO BUT I JUST WANTED TO THANK YOU JUST WHAT I WAS LOOKING FOR.... ALSO THE TRACK "CLEATS " ARE CALLED GROUSER PADS JUST THOUGHT YOU WOULD WANT TO KNOW ALSO REAR ATTACHMENT IS CALLED A RIPPER ASSY THANKS AGAIN

[@mysterygrannyeatsasmr]

These look so real...I thought these were real when i first watched your videos...Happy New Year!

[@obeesrcconstruction9279]

Happy new year to you too Granny; I still love watching your gum videos!

[@emanuellugo2290]

I wanted to see mods vs mods

[@obeesrcconstruction9279]

I made a video of that but took it down due to some violation and forgot about it. I'll put it up again once I remove the soundtrack they were bitching about.

[@John-nx6ue]

Im working on my huina 1569 as well I made a blade today. Will put it on tomorrow. Im gonna buy window wippers to improve the track what did you use for the tracks?

[@obeesrcconstruction9279]

I used the ones that came with it and glued pieces of wiper blades on them with JB Weld.

[@John-nx6ue]

Cool

[@alandavies7400]

Hi, what battery do you get with the huina, some companies list them as 3.7v and others say 7.4v lipo ?

[@obeesrcconstruction9279]

7.4 volt lithium polymer,1000mv

[@RickyD1968]

I wonder why they do not make a metal version because this plastic one does not work good ???

[@obeesrcconstruction9279]

Unfortunately in order to keep the price low the toy company uses mostly cheap plastic. Since it is much lighter they can use cheaper motors and ship it for a lot less.

[@lordofwar7713]

Diecast masters makes a metal version too but they cost way more not sure of the power though I have the plastic version but I added weight to mine to make it able to push dirt

[@rufuscrossley7307]

Hi, did you make or buy the metal blade on the modded double e 579?

[@miningsimple1924]

I added weight to my huina bulldozer. A baggie full of bbs in the engine company. But it does have the strongest to turn the tracks anymore. I want to make it more capable to push snow to clear my deck

[@obeesrcconstruction9279]

I found that they all have different motors, depending on when they were built. If you have the black motors with the white gears you can only use a pound of weight for it to still perform. If you have the gray motors they are much stronger and can use over a pound.

[@derrickhousley4318]

Do know of any way to tell which drives it has without opening it up? The one I have has the black gearboxs and they have failed. I can not find replacements. If I buy a whole new dozer I'd like to get the better one

[@CLAUDIOSRC9529]

[@រៀនធ្វើកសិកម្ម-ឍ9ធ]

Wow, love Rc Bulldozer 👍🤗

[@John-nx6ue]

What did you use to make it heavier

[@obeesrcconstruction9279]

Tire weights for balancing wheels. They are little stick on metal squares sold on amazon.

[@jawn9133]

what about the tracks for the double e? what kind of wiper blades

[@obeesrcconstruction9279]

They are just the rubber squeegee parts from a generic blade from Ace Auto.

[@jawn9133]

also, where did you get the replacement blade for the double e

[@obeesrcconstruction9279]

The original blade is still there, I just cut the bottom off it and made an extension out of a heavy duty metal can and glued it on with JC weld.

[@cat-cambodia1801]

Wow Bulldozer the power 💪👍😎

[@dvega69]

I modded my Huina 1569 too: added waights and extended the bucket blade. Now my track servo gears are stripped and there is no replacements. $130 US dollers down the toilet.

[@obeesrcconstruction9279]

They now have the motors on aliexpress for $30.00 or you can get the metal gear set off ebay and replace the slip clutch. You can also replace the worm gears with the ones from a Huina mining truck (the 4 wheel drive toy one) which is simple to do.

[@9040sh]

@@obeesrcconstruction9279 can you give me linke ali expess for motor because i cant find it

[@obeesrcconstruction9279]

@@9040sh Let me see if I can find it again.

[@obeesrcconstruction9279]

@@9040sh I went back and looked but the seller is gone. Sorry, I guess I'll have to wait until he gets more stock.

[@sedrickisrael590]

We're u get the tracks for the huina

[@obeesrcconstruction9279]

Those are the original tracks, I just added the grips on them by gluing the rubber from car windshield wipers to them with super glue.

[@sedrickisrael590]

Ok thanks

[@BernardTerray]

Pas possible d'avoir des commentaires en français ?

[@longhorn-alpencrawler]

Nice 👍 video 🤩🤩👍👍🥇💯💯💯🤜🤛💯💯💯

[@asyifaakmal]

mantap