My Ford Cabover is Running Again! Full Engine Swap

Check out my sponsor aura.com/goodrich to get a 14 day free trial and see if your personal information has been leaked online!
Follow K2 Express on Instagram: @k2expressinc
I've been posting exclusive content to my Patreon as well if you would like to check that out:
www.patreon.co...

[@humppanen9130]

My man doing full engine swaps with flipflops. 🤣😎

[@MrSelmo85]

Super Trucker shit lol

[@jeremynelson8496]

If he starts doing more engine swaps, he may have to upgrade to crocs.

[@keepontruckinoutlawlife1248]

Ya no shit

[@jrm88382]

You can take the man out of Florida but you can't take the Florida out of the man lol

[@thefarmkid13]

Typical Florida man.

[@johnmichaels4330]

Freiburger would be proud. Complete engine swap in sandles, using parts of old engine and getting it working. Total roadkill.

[@bu5hm4nn]

I love how you sped it up and narrated it. I cannot sit through other build videos when they are real time, but this one I actually watched all the way. Great job!

[@George-dy3pt]

You need to learn patience!

[@richardbangma9943]

😅😅

[@jeraldmcwilson2189]

Ok red . . How much turbo power . . Question warrenty how many years

[@jeraldmcwilson2189]

Question are they craftmand tools

[@2015_Rubicnn]

Oh, well as long as he pleased you, that's all that matters your majesty.

[@lucidrain9469]

I give mad respect to this man doing this job by himself. He doesn't need a team of mechanics just milling around-

[@mofoq]

>uses shopvac to create vacuum to prevent fuel backflow ingenius >uses old oil pump (previously used for burn barrel project), jerry-rigged with a drill and zipties to prime oil in engine florida engineering

[@TiresandTribulations]

I hope you see this man. My eyes light up if I see you, Deboss garage, or watch wess work pop up in my KZbin feed because you all are genuine and just some normal people filming their life wrenching on some stuff. Stay like this man don’t go click baity.

[@George-dy3pt]

I guess you don't know who Warren from Western Truck and Tractor Repair is!

[@77Patriot]

I know some people helped you, but watching you do most of this by yourself is very impressive. Keep up the good work. 👍🏻🇺🇸

[@joecoool100]

Hunter you are a good mechanic and a hard worker….small bit of advice. If your looking to save time, put both engines side by side in your shop, as you take a part off of one(old one) then take two steps and put it on the new one. No lost bolts, spacers, washers etc. No putting heavy things down and picking it back up again. Its also a great way to make sure everything is fitting in real time. Also take it from a 50 something, you are young now but someday you won’t be….your back will thank you….it’s a marathon not a sprint….much love from an old timer

[@Not_Built-Right]

100% on the money, with ya on this from a broken 50 something bloke .

[@chrisdzisiak7540]

Yep was thinking the same thing (47 years farming)!

[@YacinHamm-lx8br]

كلام في الصميم

[@williamberry9237]

Will not work. Certain procession to the job, front to back. Just like taking off your pants then drawers. You go back with drawers then pants.

[@JClaudeo]

Little trick to help on heavy trucks when you don't have the clutch alignment tool - Load the clutch onto the input shaft of the trans and mount the trans to the flywheel housing. Then just roll underneath and zip the flywheel bots in through the clutch inspection cover where you would normally reach through to adjust the clutch

[@Nairod2]

There is something funny about pumping a bucket of oil into an engine, I will never complain about filling a V8 again.

[@TheAnnoyingBoss]

Listen i wish we made cab overs great again.

[@Ginokhu]

@@TheAnnoyingBosscome here to europe bro we got best trucks you can get🫡

[@paulolson734]

Something else I just noticed- it has an aluminum frame. Check it carefully for cracks, especially around the suspension attach points (if memory serves correctly). In my time at a Ford truck dealership we had two trucks that had to have aluminum frames replaced under warranty due to cracks. Ford didn't require that we send the old rails back and one of the guys made ramps to get his Kubota on and off a trailer with the old rails.

[@2steeves469]

i adore these old trucks . love the aluminum frame rails , they are a rare find these days . back in the day CLT8000 were a beautiful truck

[@patrickmoore1602]

Outstanding Hunter ! Was fun to be along for the swap over. Looking forward to your next adventure! ( I’m exhausted just watching that)

[@TheMistersnoid]

Never a better time to freshen up the paint than when everything is all apart

[@anthony5227]

It is so great seeing someone with so much knowledge and talent talking such a huge project

[@reeltrides911S]

The joy on his face and absolute happiness is so cool to see. Know the feeling when I built my three motorcycles and got them started, and now love them so much, I could never be without them. They are more than inanimate objects, they become a part of your personality. Good Job Hunter, enjoy the truck, make money with it, and be safe.

[@patrickconway5542]

Hunter Brother , great job on getting this Cab over going but if you can always where your seatbelt!!!! I lost a brother in one , he was ejected from the vehicle straight through the window 🥲 he was only 27 young family man , very sad day but please drive safe and enjoy one of my favourite Rigs ! 👏👍

[@kman-mi7su]

Fantastic to see the old truck back up and running. I love that air-ride cab setup. The only other truck that had a setup something like that was the Mack MH cabover. I never drove either one, but I worked for a guy who owned a Mack MH with the E9 500-hp motor. He said the truck was one of the best riding cabovers he'd driven once you got comfortable with how they "float", just like that Ford.

[@dougford5259]

Another old 9000 on the road. I love it! Desperately tried to talk my dad into buying one in about 1979. He declined. LOL. And it is red-white-and-blue!

[@NW_Mechanic]

Good to see you got it back on the road again Hunter! I have been wanting to get an older truck myself for a while now, my son also want to build one so I'm hoping one day we will be able to be trucking together. Way to go and get outside your comfort zone and tackle that engine.

[@YacinHamm-lx8br]

نحن نريد المساعدة اذا كنت راغب في العمل من رد شاخنة قديمة الى شاحنة جيدة وقوية

[@kellyhill4410]

In my daily call the cat compression break a retarder that worked against the engine oil pressure. Really crazy how it works. Like a reverse torque converter. Awesome video Hunter 🤜🌟🤛💯🤠

[@bu5hm4nn]

Hey I'm impressed with that vaccum idea to keep the fuel in. Nice one!

[@cedaredrington-tp3ux]

Man, I really love what you do. My name is Cedar. I’m in Klamath Falls Oregon. I’ve worked on trucks for years about 35. And at this point in my life, I’d like to try to make some money at it and I really love watching you work on tracks. You’re amazing. God bless you.❤

[@m.searay4629]

You made quick work of that even with having to redo some of it! Great job! Look forward to seeing you haul.

[@Potrvlb]

Damn good work! Impressed that you knocked that engine out and refitted the new one with ease and so fast! Damn good catch on the front and rear main seal. How did you keep so dang clean?! That’s my question. Hey and dude I was happy to see you were on my main page on here so I seen you posted a video! And dude I could feel your excitement driving your beauty and fun to watch! I felt that same happiness driving my 92 Freightliner COE with forward set steer axle (not the ugly ass rear set steer axle, never understood companies/dudes who bought those) and 425 CAT, LOVED that truck! Soon as you smiled and said “i love this truck so much” I was smiling with you and knew exactly what you were feeling, pure happiness and excitement🤩🙌. Excellent video, dude!

[@damarkushammond8775]

Glad to see the ole Cabover back on the road 😎 put a set of stacks on it an put him back to work 💪🏾💪🏾 can't wait to see the future videos to come

[@davidr6585]

Ok, watchcin wrenchin' videos can get monotonous but still be interestin'. I like how you time lapse the wrenchin' while narrating tellin' us what your doin, great work Hunter!

[@brentmcmahon8188]

That’s how we primed detroits 2 strokes 318 ‘s and 238’s and it worked great because in the cap were blow out ports and if you would pop one out and car valve stems would pop right in and made life easy .

[@victorlgcarvalho]

Excellent video! The passion you put in the truck is something I can really relate to!

[@davidroberts6594]

Nice job on the engine swap- nice thing with a cabover is just tilt the cab and go. Ford was ahead of the times with this cabover with the full air suspension cab. they fell a little tippy but its worth the nice smooth ride it gives- the smoothest riding american cabover. I drove one once and was amazed with the ride empty, even with 24's on the front.

[@jasongardner9127]

when i saw u got the new motor , i new it wouldn't be long till this video was out been lookn for it. congrats an keep the vids coming.

[@chadjones4956]

When building or installing new motor on anything it's always a must to put new water pump and all new gaskets including hoses. Never reuse the old with new.

[@Deathdealer4L]

My dad had a Ford and went to a conventional Pete and missed the Ford. If he was still here he would have a big ole smile watching this video.

[@danjohnston8146]

Nice video that brought back memories. My father had a 1979 Ford Cabover when I was a teenager.

[@erikfalla9893]

My new favorite youtube channel. So nice to se a mechanic not trying to be a stand upp comedian 👍

[@nzsaltflatsracer8054]

Back when B's were still running OTR I replaced a lot of broken injector lines due to vibration. A set of new ones & a full set of clamps will save you for the long haul. I'm a 72yr old road service mechanic still working. 🤓

[@louiskats5116]

Goodday Hunter from Australia 🇦🇺 Absolutely mad mad respect to you great to see young strong men of your generation doing a honest hard day's work & deserving all the good luck & fortune coming your way. Both Australia and U.S.A can use more young Fella's with your drive & enthusiasm. Here in Australia we are still running brand new Cabover Kenworth's even with a Studio Sleeper. Always wondered if it worth buying a new Kenworth export it to the U.S.A convert the steering & running them on the highways of your country. Cheers Louis Kats 👍

[@paulolson734]

Great job! Time for new cab air ride shocks. Also, A/C on a CL is extremely problematic (and $$$) especially with a sleeper cab. It has 3 evaporators, lines running everywhere chafing on everything, it's a mess. Another also- the radiator is very tall and relatively narrow. That means it has relatively few tubes and it doesn't take many of the tubes getting plugged to cause overheating. Cooling system maintenance is a must. Getting the radiator out and back in is NOT a fun job. Good luck with this. Great to see a CL in such nice shape back on the road.

[@anthonylee2099]

Wow. You’re the Man Hunter. Great narrating the build. Lot of thing to remember. Great job🤙😎

[@franker1111]

Glade to see another beautiful truck saved and back on the road. I'll find one of those one day. Till then I'll run my w9 till it can't run anymore

[@lstone.09]

Hunter, awesome video. Had to laugh at the flip flops. It's kool to see that everything worked out and it started for you. That tractor is sweet. Heck I'd even enjoy driving it unlike some of the junk they make today. Roll on dude. 🚛🚛🚛

[@carlossalvetti6770]

Been there, done that. Having to undo things by cutting corners is not fun. You are the man.

[@erikdalen9563]

I took my road-test in a similar old ford cabover 32 years ago...Thanks for the video

[@jaxoncarter7089]

Heck yeah man good to see you get that beautiful truck up and going again

[@williamberry9237]

To be such a young man, I consider you to be brilliant and motivated. Great video. Bring us more.

[@mitchellsavage6933]

wooooo more hunter content!! love what you are doing man keep up the great work!

[@stomper12000]

Awesome video and thanks for sharing your passion and action! You can enjoy that endless black ribbon way more now; we all learned something even if we're not into big rigs.

[@paulsouthgate8954]

Used to work on one of those years ago in NZ.Right hand drive with a all alloy cab i think.Was fastest truck around at that time as it was a double overdrive box.Thats wat they told us anyway.I remember the cab used to shake and rattle lot.Very light weight truck for NZ rough roads.Cab got metal fatigue and had to be welded up and chassis broke and had to be repaired too.Was owned by a company called RAYMAC

[@TonyLasagna]

Really glad you decided to fix it! Better than ever. What an old sweetheart.

[@calholli]

He didn't "decide" loll. He got that engine sponsored to him. You can't say no to that..

[@TonyLasagna]

@@calholli still a choice 🤷🏻‍♂️

[@Not_Built-Right]

When you were mounting the gearbox had me a nice maaaaaaaad giggle , Hunter "A few words of encouragement" ..........Most mere mortals would've said I swore copious amounts at it we get what you're saying man . Keep kicking goals young fella go live an awesome life .

[@waitemc]

I got to see alot of these 9000 built in ky at KTP years ago. Then during my senior year summer vac. I got hired to work with the film crew to shoot the training film for Freightliner when they bought the airomax-louisville truck line. It was a sad time seeing them go.

[@Sadlor82]

Im so glad to see You in your beloved truck that happy, it is really fun, i hope it will serve you well. God bless you. Greetings from Poland.

[@edwardbright9434]

Good job man

[@NikkoHUN]

Did you do this all alone without any helping hand...congrats sir, that's a very good job and huge respect for!

[@pwsteven]

Very happy to see your truck running again well done.

[@cobra3289]

The Ford cabover was the best looking cabovers. Great find!

[@a.bergantini4129]

You can very easily 3D print a clutch alignment tool for cheap. You can have one for each motor/clutch you work on

[@benschlack5814]

Good thing you noticed the seals 👍

[@ionbusman2086]

I like that “timing hold” bolt is in a spot where the starter has to be removed to install it. And you can’t install the starter with it installed. Smart fail safe! If you forget it’s installed and try to crank it over. Diesels are cool, just having the fuel lines protected under the valve cover is neat. I don’t know much about them but I like them.

[@thomasreyes2857]

I used to drive one of those fords years ago one of the smoothest riding cabovers I've ever been in

[@billyhaddock5540]

The Flipflops Man tearing the old motor apart and putting-in a New motor. great job Hunter.

[@danielkennedy1524]

A Very cool video! Those big fords were awesome! Great mechanical work! Lookin forward to the next one!

[@geraldingram9351]

Awesome, loved the whole show,man that truck is fantastic, love it.Gerald Ingram, New Zealand.

[@BarnStangz]

Nice job man, it must feel good to get something like that back on the road again! Engine sounds good too, can't wait to hear that thing loaded up pulling hard!!!

[@bobcote1375]

Just watching this video is exhausting. That was a lot of work you did man! Enjoy your new engine. Can’t wait to see what you do with this.👍

[@fuzzybutkus8970]

There’s was company out of Detroit that Ford COEs were the only truck they ran. They had a ton of them. Might still be around called OJ Transport. They were in nice shape when they got them. They hired 1099 drivers and all that brings. They pulled step Vans. All lite weight stuff,Seats,interiors and dashes. Might be a place for parts.

[@sfm.x]

Hunter giving us perfectly timed content 👌

[@feisaloduuu1263]

Was like did I miss any hunter uploads and then boom a notification.

[@sevsevillano5523]

Nice job

[@selfmadefarmer2020]

Great video love the narration! I farm up near Idaho Falls and just picked up an old K100 cabover to use hauling hay. Wish I had your mechanic skills! If you ever need some content I have a combine I need to pick up in MT next spring!

[@P-J-W-777]

It’s great that you jumped in the learn how to build the engine but why not take the extra time to repaint everything you took off the original engine? I’ve rebuilt a lot of diesels and we always repainted everything for a couple of reasons. It makes it look good helps against corrosion but more importantly you will notice any leaks almost immediately and will make watching leaks during the break in period.

[@TDTeddy]

Wow. What an immense amount of work! Good job dude.

[@mrdavid-t3w]

sacré travail,félicitation il revient de loin !

[@mickestahl6178]

Hunter, the man the myth the legend :D

[@dsadzaglishvili]

I see how he loves this old truck! Respect my friend!

[@daveehrle5547]

Congratulations on the engine. Sounds great 👍can't wait to see more .

[@robert.brokaw3829]

Nice job young man. Stay safe and enjoy the ride.

[@kellyhill4410]

That's awesome Hunter . What you got next. Cool things? Interesting 🤔 . Thanks for the video brother 🤜🌟🤛💯🤠

[@tn65s]

Super job. Love the old Fords. Keep on truck'n. From the Great State of Maine.

[@nelsoncarter915]

Hey your looking good mate.. like healthy, relaxed and fit.. Good to see your keeping well.. and good to see you here doing your own thing.. truck is awesome!

[@XORBob]

So fun to see your enjoyment with that truck... and love the safety shoes!

[@gunnone5715]

Awesome video! Great job! The old Ford is badass!

[@WestCoastRoller]

Great work Hunter. Looks like a runner to me!

[@myshellee]

Good for you Hunter! It's awesome to see you so happy and the truck is finally running the way you want it! Keep on trucking!

[@larrylong6268]

Good job! Especially doing it by yourself.

[@cabovermike]

Now its running (i would have been watching the oil presure on 1st start up) !,. clip all those injector pipes up otherwise you will start breaking injector pipes running down the road , then check all oil/fuel/water pipes for rubbing together or chaffing,. nice job but maybe take one part off old motor and refit on new motor, just a thought,. I love these ford double sleepers they are a nice looking classic truck, .looking forward to see it working again, keep on trucking,. cheers ,.

[@durreallduncan4710]

Nothin ABSOLUTELY NOTHIN like that chugga chugga of a diesel engine

[@KCAATV]

You and the truck deserve working AC . This is a great truck. Don't cut corners and reduce its value. There is an old saying, "There is never enough time or money to do it right, but there is always enough time and money to do it over"

[@dracofenix3860]

6:45 i'm not a very experienced mechanic, but one lesson i did learn is not to cut corners that would take several hours to fix 😆

[@finleypatmalcolm]

Its sooo much easier if you slide the clutch assembly on the input shaft and then button up the clutch once the tranny is installed..

[@keen1957]

Wow what a great vid. Love the cab over design. Keep up the vids !

[@robertpoudrette4483]

Good job! Very nice CL9000 you have there!

[@sadaaromin13]

Glad you’re back

[@fiebre4x418]

great to see it back in the road 👍

[@Alwayssomethinggarage]

Good job, much respect on the work. Good luck on your hualing.

[@the.porter.productions]

O-H-I-O Porter greetings 🇺🇸 A cabover with a Cat engine…WOW! Cabovers Rule! Mine has the Silver 92 Detroit & I still love it! I can’t get over you doing all of this in flip flops. Gotta protect those feet & toes! You plan on repainting the engine? I’m glad that you admitted to taking shortcuts & then doing it right, even though it took you much longer to do it all. A job well done! WOW! Nothing like the sound of a good Cat engine! Thanks for sharing! 🥰🤩✌️

[@joergrudolph7346]

Thanks for the video. A little disappoib´nted bcause you did not clean the parts and repaint the parts before assembling.

[@norcanexs.g.llc.4625]

A good time to rebuild the injection pump, starter, air compressor, a new clutch and so on!

[@robertbabbitt3829]

It's looking good, but after you get it all assembled. Are you gonna clean it and put a coat of paint on it before you put it in?, Along with cleaning the frame rails , all that work, it would be Ashame not to. Back in the seventy, my dad had a couple of them that he used that as lumber yard facility really enjoyed driving them.

[@alangobel8513]

I’m trying to keep that kind of enthusiasm going in Life! Yes, and I too Love My Truck!