30 year painter here. I use the contour edge for scraping steel tube handrails. Works great. Good presentation on this tool. I got mine on sale for 5.88😁
@rowdy38372 жыл бұрын
The purpose of the roller cleaner isn’t to save the roller but to save the excess paint it holds. You’d be surprised how much you get out of a used roller. Great video!
@NMcCauley11 ай бұрын
Such an underrated tool… it comes in handy every every single time 👍
@MrRollerhoc32 ай бұрын
The wrench is on that tool are for the sprayers taking the hoses off
@KW-jq5je3 жыл бұрын
I just bought one for backpacking. I'll be testing it for: Pulling tent stakes, shaving fire starters, digging hole for bathroom, splitting small sections of branches for a wood stove, cutting cord and rope, removing weeds from a tent site, fighting off gangs of zombie armadillos. It should be interesting.
@TheTruckGuy3 жыл бұрын
That will be great to see how it works out - I could see plenty of uses for it. I think this plus a utility knife could solve pretty much any job out there. Let me know how it works out K W! Also, hit me up with a subscribe if you can.
@sheenanakahira77922 жыл бұрын
How did it go? Was it useful during your canping?
@smirage222 жыл бұрын
@@sheenanakahira7792 I think he's still in the woods
@MasterYoist Жыл бұрын
@@smirage22 the zombie armadillos might have got the best of him.
@pepepepito62318 күн бұрын
Good one, but about the armadillos, it is just leprosy...
@daiiahi34032 жыл бұрын
The concave works well on galvanized pipe railings. Remove old paint and primer.
@practicalguy9733 жыл бұрын
I think I prefer something with less holes in it so it can be used better as a spreader and pry tool. Those screw drivers in the handle are a real stretch from the Husky designers imagination. I kind of like the 3" Red Devil 6251 EZ Grip Multi-Purpose Painter's Tool. Simple and less holes!
@rubiconoutdoors3492 Жыл бұрын
I like the simple folding pocket knife verdion of it.
@dangoss71802 жыл бұрын
Actually would not be bad as hiking/camping, but out bag think. It’s pretty light. A thing you can beat up , instead of your big knife. I’d use it to scrape off bark or split small logs. And other things can be thought up.
@TheTruckGuy2 жыл бұрын
Agree. In my opinion, this plus a utility knife for camping, and you're set for a successful trip.
@dangoss71802 жыл бұрын
@@TheTruckGuy it’s funny how the years go by and we realize what was right before us all along, are really good tools. I bought a Japanese pull saw. Sure enough the thing is a piece of cake. My go to for cutting small pieces when it’s not worth the trouble to pull out a power tool.
@stevejuststuff27792 жыл бұрын
Proudly brought to you straight from China.
@TheTruckGuy2 жыл бұрын
True.
@TheTruckGuy2 жыл бұрын
Please subscribe if you don't mind. Thanks Steve!
@chrisdenney41823 жыл бұрын
If I were abandoned on a desert island and could only have 1 hand tool, it would be a painter's tool.
@matsudakodo2 жыл бұрын
Not a Swiss Army knife?
@justalurkr Жыл бұрын
The concave scraper is apparently for scraping excess paint off a roller.
@donaldbegs651610 ай бұрын
I got it for $4.98 at Home Depot.
@canolacola4353 Жыл бұрын
concave blade scrapes rails and bars . sharper corner gets into trimming, the edge a rough scraper, can opener on other corner, roller scraper to get paint back from roller, the hole in middle is to take out free spinning gyrock screws (missed shots when aiming for strappings)... pull while drilling, the metal butt can be used to close cans or even to indent screw holes after taking screws out to prepare for spackle. and they should have made a paint bucket opener instead of bottle opener. because paint buckets and mud buckets are just hell to open and close by hand all day. and the hex part can be sharpened into more detail dowel scrapers. they might be good for certain tools or to incorporate rods and nuts into your packout but i havent found greatest use yet for them
@canolacola4353 Жыл бұрын
besides metal butt falls off too easy u need to break it out and epoxy it back in
@JoeyAdes2 жыл бұрын
Works good as a scraper. But not good for spackle lol
@Talaramama9 ай бұрын
5:06 u put the hammer the other way round!!! Which means u rendered the tool useless and contradicted wat your talking about!!!
@bobnickett3 ай бұрын
Obviously, you might be book smart, but I doubt you have ever used this or many other hands on tools. Don't review tools you know nothing about. These tools are awesome. Not for folks like you. You would have had a little more pep in your voice if you'd ever actually worked with one. Leave your reviews for real hard working guys who know the true value of this tool.
@TheTruckGuy3 ай бұрын
Thanks Bob! I love you passion, brother. I use my tools everyday, but I'm not a professional contractor. Of course, I've never pretended to be either. Cheers!
@djjinerson3 жыл бұрын
He said “stiff tool” he he he he (Bevis voice) very useful tools for sure nice vid
@edstevens68392 жыл бұрын
I use the edge close to the narrow curve to get the paint out of the gap of gallon paint cans before closing the can back up.
@edmerkel24076 ай бұрын
A few minutes with a benchgrinder, sander or knife sharpener turns this into a highly effective defensive weapon. It's probably not what Husky envisioned, of course.
@rafaelakayuco90423 жыл бұрын
Probably the most useful tool I own.
@TheTruckGuy3 жыл бұрын
Very, very true sir!
@XSwordOfWarX2 жыл бұрын
I can't see many situations where those nut drivers would work. The tool is so big that you likely won't have room to turn the nut even if it fits. Eliminate those and the bottle opener so the tool can be smaller and less likely to poke you when it's on your pants. That screwdriver piece wasn't obvious for me either, funny thing is I can't even get it out without using another tool (maybe after the first time it's easier).
@RETRO-RANEYS-RESTORATIONS Жыл бұрын
It's not for nuts it's for tightening or loosing your spray gun.🤫
@MyUnquenchableThirst Жыл бұрын
I also would like to find one with a lot less holes. I hate that every manufacturer is putting a bottle opener on everything! Hole in the pummel sucks too cause you can't hit nails down
@babywise20963 жыл бұрын
The radius scraper works good on colums and metal or wooden rails, things like that
@TheTruckGuy3 жыл бұрын
Completely agree!
@AereForst2 жыл бұрын
16 in one. Self-defense tool if needed. I’m kidding.
@TheTruckGuy2 жыл бұрын
If need be, you are correct!
@dustinhartley89886 ай бұрын
I just picked up a few on clearance for 3 bucks. Ayoooo. Im hoping theg come out with a new one
@BlessedNess96192 жыл бұрын
For the concave edge I would use for my clothing rod if I wanted to repaint it for my closet. I painted mines.
@papa-grammy Жыл бұрын
Sorry, I like to see examples...show me
@emileo142603 жыл бұрын
Hoping the paint helps you save money on buying more paint
@TheTruckGuy3 жыл бұрын
Good point! I should try to save more paint. Hit me up with a subscribe if you don't mind.
@babywise20963 жыл бұрын
I keep losing the little star inside.. I lose tgese and rebuild them at leat every 4 months. It's a terrible spreader every thing else is ok
@TheTruckGuy3 жыл бұрын
Yeah, I agree the spreader leaves a lot to be desired. I could see losing the star, not my favorite design for the screwdrivers.
@ARusso7029 ай бұрын
💣 I've actually had this tool for a while now and it is amazing. And you are right it has everything you need and I paint all day everyday as well as texture I do everything and this tool is far better then any other 5 in 1 etc out of all the others five in ones putty knives whatever .. This man IS absolutely right!! trust me great tool!! I use it for everyday I paint everyday Etc it's amazing tool don't waste your money on all those other cheap cheap ones like I have in the past and since I've had this one for over a year now and it's still in great sturdy perfect working condition this guy is giving you the gospel
@ebbrown87719 ай бұрын
This was super helpful. I had no clue, I use the tip to rip painters tape with the crisp edge, but that was about it… Thank you so much for this video.
@cola6172 жыл бұрын
Too lazy !! Talking more then action
@MasterYoist Жыл бұрын
Mine has a metal bit driver built into the handle. The nut driver tools on the side of the bladed area are a complete waste. The bottle opener is a complete waste. Other than that the tool is fine and can be really good at shaving and splitting wood when you need to do that.
@attainableaudio4533 Жыл бұрын
Yes if they could have built a slotted (outlet and light switch covers) and standard Philips driver into it...
@michaelbluejay2 жыл бұрын
Even at 2x speed the video is still slow.
@MyUnquenchableThirst Жыл бұрын
I think the older one is better. Do you know where to find it?
@juansaydeflores8903 жыл бұрын
bought one this weekend.. helps to have the rigth tool for the job.
@losmoore33582 жыл бұрын
Is there a couple of areas that could be sharpen?
@MistikButterfly Жыл бұрын
Awesome video. Thank you. 😌
@GoodLaw2 жыл бұрын
Thank you for explaining the last 4 tools. I was so confused by the metal part on the handle. The worse part is I needed a flat head to take it out. Such a useless inconvenient tool.
@TheTruckGuy2 жыл бұрын
Completely agree! Thanks for watching, and please subscribe if you don't mind.
@bradleyr34 Жыл бұрын
I think the intention for the flathead blades is for switchplate screws. Gotta remove them to paint around the box, right?
@attainableaudio4533 Жыл бұрын
@@bradleyr34ust got one and tested the slot screw driver on a Philips and it does work on a pinch, on they can't be in that tight, and you wouldn't want to take out a long, or even a medium length screw, lol