Husqvarna Z254F Blades Not Engaging

  Рет қаралды 11,019

Carpenters Self Reliance

Carpenters Self Reliance

Күн бұрын

Пікірлер: 80
@thecarpentersselfreliance
@thecarpentersselfreliance 3 ай бұрын
The repair video Husqvarna Z254F Blades Not Engaging - The Fix kzbin.info/www/bejne/gpjEnKeAe658ma8
@Level3YoyoMaster
@Level3YoyoMaster 2 ай бұрын
The video is private. Can you make it public or tell us what it was?
@thecarpentersselfreliance
@thecarpentersselfreliance 2 ай бұрын
@@Level3YoyoMasterno longer private, thanks?
@Level3YoyoMaster
@Level3YoyoMaster 2 ай бұрын
@@thecarpentersselfreliance working now, thanks a ton!
@AnneHeyns
@AnneHeyns 8 ай бұрын
Hope you get it sorted.
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
Working on it 👍
@adamhuegel
@adamhuegel 8 ай бұрын
Take the mower deck belt cover off an make sure the belt is not broken. Get the wiring diagram and start testing the circuit with a volt meter. It sounds like you aren't getting 12V to the PTO.
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
Thanks, I will check all the belt pulley and the belt. Equipment electrical is not my strong point
@MURCHISONCHARLES
@MURCHISONCHARLES Ай бұрын
12v to the PTO
@jeffwatson5626
@jeffwatson5626 5 ай бұрын
I've been fighting the same issue for a couple weeks now. Finally figured out that there was a short in the ignition switch. It would start the mower but the PTO wouldn't come on. Wiggled the key around and the PTO would click on and off. $14 switch at our local mower parts store.
@thecarpentersselfreliance
@thecarpentersselfreliance 5 ай бұрын
Great you got it fixed!
@jacko377
@jacko377 8 ай бұрын
if it has an electric pto, the drive belt should always be under tension.
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
Drive belt is tight it’s not connected to the pto clutch
@PandJsHomesteadAdventure
@PandJsHomesteadAdventure 8 ай бұрын
Hi Jerry! We had the same problem, different mower. We had a emergency off for blades in case your butt comes off the seat. Our wires needed some work, and poof all good! Maybe same problem? Hope its a easy fix either way.
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
I’ve checked all the wires, I’m stumped
@PandJsHomesteadAdventure
@PandJsHomesteadAdventure 8 ай бұрын
@@thecarpentersselfreliance Ah ok, ya our safety switch and wire under the seat was our problem. Good luck!
@69ztang
@69ztang 8 ай бұрын
Maybe it’s the switch not the wires. You can unplug and short the wires to bypass the switch.
@PandJsHomesteadAdventure
@PandJsHomesteadAdventure 8 ай бұрын
@@69ztang Yep we had a bad switch. Bought a new one poof no issues. Was hoping the same for Jerry. Easy fix.
@NoneyaTexasontheback20
@NoneyaTexasontheback20 8 ай бұрын
Clutch or switch even if new don’t mean it’s a good part…. Check with ohm meter continuity both switch and clutch …. Check wires maybe blew connection loose.. mine will engage clutch with engine off so I can hear click and know it’s working. Definitely new belt…. Nothing bound under mower in blades. String wire etc
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
Thanks Jake, my mechanical abilities when it comes to electrical is not good at all. I’ve never understood how to use ohm meters and testers. I’m going to next week remove the blades and check all that out, but the blades do spin freely. I forgot to and wish I would have included in the video that when the mower is off and key on the pto clutch does click. So I’m thinking it’s getting power. Thanks for the input, I’ll work on it next week when schools back in and maybe do a follow up video of every thing I have checked
@NoneyaTexasontheback20
@NoneyaTexasontheback20 8 ай бұрын
@@thecarpentersselfreliance if it’s engaging then only other thing is belt…. But also just because it’s new don’t mean it’s good….maybe bad (new) Chinese clutch….👍. Good luck
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
@@NoneyaTexasontheback20 thanks my friend
@pearldrops2278
@pearldrops2278 4 ай бұрын
I just finished repairing a similar problem with my PZ60 commercial grade 2016 mower. Finally traced it to the plug on the wiring harness side of the clutch wire. Plug looked good but on further inspection, found the male/female pins inside the plug were loose and not making contact. Cut it out and wired in a new plug. It's always helpful if you can get a wiring diagram to trace the circuits on whatever part has failed. The diagram will always lead you to an electrical problem if there is one. Owner's manual has the wiring diagram.
@thecarpentersselfreliance
@thecarpentersselfreliance 4 ай бұрын
Mine was the spring, the fix video soon , thanks!
@OurTreasuredHome
@OurTreasuredHome 8 ай бұрын
Hi Jerry well i dont know about lawymowers lol but I know you can figure it out have a great day stay safe
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
Thanks 👍
@jcox8730
@jcox8730 5 ай бұрын
mine doing same thing as of today. every belt system has a tensioner pulley , and evey one of those has a spring on it somehow. likely just a separate spring, which has probably broken and fell off of the pulley. it almost has to be that, like You the chutch is engaging but with the spring gone it cannot get tight to the belt, so the blades cannot turn.
@thecarpentersselfreliance
@thecarpentersselfreliance 5 ай бұрын
Check all the springs, that was our problem, runs great now
@APlace4HER
@APlace4HER 8 ай бұрын
Hope you get it started it. Let me share this with my boyfriend to see if he knows what’s wrong with it.
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
Please do, still have not figured it out
@bryandrums32
@bryandrums32 8 ай бұрын
I wish I could help bro,,,,,,, 😡😡😡😡😡that kind of stuff makes me mad
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
👍
@bryandrums32
@bryandrums32 8 ай бұрын
@@thecarpentersselfreliance 🙏🙏
@charlesraythomas
@charlesraythomas 8 ай бұрын
What did you find out? My lawnmower is doing the exact same thing and I have the same model. I just get a clicking noise when I engage the blades.
@PaulKn
@PaulKn 8 ай бұрын
Same issue. Belts came loose and fixed that. Now it clicks like the clutch did engage but still not turning the blades.
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
When Pto clutch froze it threw the belt tension spring off. It was just hanging there. My son found it when I gave up, reattached the spring and I’ve cut over 6 hours since !
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
Check belt tension spring
@TheBuddFiles
@TheBuddFiles 8 ай бұрын
Sending my support
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
Thanks my friend
@amylewismayer
@amylewismayer 8 ай бұрын
dont know but interested in finding out what you find out
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
I’ll let y’all know
@SolidShotGolf
@SolidShotGolf 4 ай бұрын
Where was the tension spring located? Just ordered a new switch
@thecarpentersselfreliance
@thecarpentersselfreliance 4 ай бұрын
Email me at jlcmail99@yahoo.com. I’ll send you the fix video
@mcconn746
@mcconn746 6 ай бұрын
Maybe I am missing something but I suspect you have to activate the seat switch and deactivate the parking brake to turn on the belt PTO shaft. Have you checked your safety switches?
@thecarpentersselfreliance
@thecarpentersselfreliance 6 ай бұрын
All were fine, belt tension spring fell off, all fixed! Thanks
@jacko377
@jacko377 8 ай бұрын
check for bad routing of the drive belt or a spring left off from changing out the pto.
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
Drive belt nice and tight, deck belt loose. The Pto will click but not spin
@DamYankeeOutdoors
@DamYankeeOutdoors 8 ай бұрын
@@thecarpentersselfreliancesounds electrical then. All your safety circuits need to be functioning properly to allow the blades to be turned on. Both drive bad safeties, seat, parking brake, reverse pto kill switch if it has one
@DamYankeeOutdoors
@DamYankeeOutdoors 8 ай бұрын
@@thecarpentersselfreliancealso, the blades shouldn’t turn on unless you have both drive bars closed.
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
@@DamYankeeOutdoorsthanks, fixed. Pto clutch was locked up and when it did it popped the belt spring. Son found it and repaired this morning
@oilsmokejones3452
@oilsmokejones3452 4 ай бұрын
My Husky 2452 had recurring bad contact at the ignition switch plug...took a few times but just good ol' WD40 and unplugging and replugging fixed it for couple years now..
@thecarpentersselfreliance
@thecarpentersselfreliance 4 ай бұрын
I got the the fix video uploading soon
@bobthomas1209
@bobthomas1209 8 ай бұрын
U need to pull ur handles in to hit the safety switch’s to engage ur pto
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
Pto clicks, mower will not start if handles are right
@bobthomas1209
@bobthomas1209 8 ай бұрын
Yea I believe so
@JerryWilliams-fg2qi
@JerryWilliams-fg2qi 3 ай бұрын
Is deck spring in place
@thecarpentersselfreliance
@thecarpentersselfreliance 3 ай бұрын
At end of vid, all springs in place
@carol07643
@carol07643 8 ай бұрын
I ask my husband
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
Ty
@juanluciano401
@juanluciano401 8 ай бұрын
Could your spindles be both seized?
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
All spin freely
@williegreen6605
@williegreen6605 6 ай бұрын
having the same issue with the same mower trying to find out the problem myself
@thecarpentersselfreliance
@thecarpentersselfreliance 6 ай бұрын
Check all springs, tension spring was off on mine
@lenamaner4227
@lenamaner4227 4 ай бұрын
Check safety switch
@thecarpentersselfreliance
@thecarpentersselfreliance 4 ай бұрын
👍
@jrrhodes75
@jrrhodes75 5 ай бұрын
Can you show what you fixed? What spring did you adjust/reinstall? Help!!!
@thecarpentersselfreliance
@thecarpentersselfreliance 5 ай бұрын
I’ll try to get back out there in next couple days, and let you know
@jppcps
@jppcps 5 ай бұрын
I had same problem with my husquavarna. All it was the connection was loose and almost completely unplugged. Plugged it back in and wa-la it worked. Visual check of everything will find the problem.
@thecarpentersselfreliance
@thecarpentersselfreliance 5 ай бұрын
👍
@historylooker7
@historylooker7 8 ай бұрын
Wish I could help ya ,man ✌🍀
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
👍
@APlace4HER
@APlace4HER 8 ай бұрын
New sub here to support from southwestlivingwith Val channel. 😊
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
Welcome to the farm
@dustinwilson7954
@dustinwilson7954 6 ай бұрын
Wiring.
@thecarpentersselfreliance
@thecarpentersselfreliance 6 ай бұрын
Ended up being a belt spring
@theadventuresofkennydebbie
@theadventuresofkennydebbie 8 ай бұрын
Plugging along on #11 of 17
@thecarpentersselfreliance
@thecarpentersselfreliance 8 ай бұрын
😃
@lenamaner4227
@lenamaner4227 4 ай бұрын
Electrical issue
@craigw2874
@craigw2874 6 ай бұрын
least helpful video I have seen in a while
@thecarpentersselfreliance
@thecarpentersselfreliance 6 ай бұрын
Not about help🤣 for you
Husqvarna Z254 Will Not Start
16:12
Johnson's Small Engines
Рет қаралды 53 М.
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
Mom Hack for Cooking Solo with a Little One! 🍳👶
00:15
5-Minute Crafts HOUSE
Рет қаралды 23 МЛН
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН
How to fix a riding mower whose blades won't turn on. (Electric PTO)
13:46
Metal In Motion Shop
Рет қаралды 183 М.
TRY THIS HACK IF YOUR BLADES WONT COME ON!
3:50
THEMOWERMEDIC1
Рет қаралды 116 М.
Husqvarna Z254F review Not a good review!!!!
7:09
mccannenator11
Рет қаралды 34 М.
Husqvarna Z254F Blades Not Engaging - The Fix
2:51
Carpenters Self Reliance
Рет қаралды 471
Zero Turn Blades Won't Engage:  Why
18:59
doublewide6 Repairs LLC
Рет қаралды 103 М.
How to change blades and grease a Husqvarna z254
5:03
3GuysGarage
Рет қаралды 17 М.
Diagnosing a bad starter solenoid
7:29
avarageerod
Рет қаралды 221 М.
Zero Turn Blades Not Engaging
15:15
JOE Z
Рет қаралды 78 М.
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41