DAIKIN VRV FAULT ! *IT WONT WORK IN HEATING MODE !?

Thanks for watching 🙌🏼
Catch me on Instagram too 👇🏼
/ hvac_uk
Also always forget to mention you can check out some of the tools I use on my amazon shop 👇🏼
www.amazon.com...
Legends 👊🏼👍🏼

[@RuthieG1]

Bang a magnet on it and confirm that the bad one has power, boom. Good job Will 👏

[@hvacuk8975]

Ruth 🙌🏼 Always handy to carry a solenoid magnet 👌🏼 Some how forgot to mention you should check the board is sending power 😅🤦🏻‍♂️🤜🏼🤛🏼

[@KG-yn9qi]

I worked in oil fields ( 22.5 year son rigs, 5+ years in surface facility’s including refinery as repair pipe fitter.) Can tell you very scary (refinery work) and priority. You are required to label and date and sign all your work in records and on actual pipes/ plumbing / valves where ever you worked! So if something failed you get to go to jail!!! I loved to run stainless steel tubing. Bending, fitting runs in over around in and out of controlled stations and test stations. To and from control valves level controls electrical over air and heat over air and gas /air regulators. Relief valves as little as 2psi up to 6,000 psi.

[@bago49]

Tools don't make the tech, once you know what you're doing often time you can get it done💪🏾💪🏾

[@hvacuk8975]

Exactly mate 👏🏼 Thanks for watching 👍🏼🤜🏼🤛🏼

[@dannyroyles3308]

Always appreciate how you simplify the work. Top man keep up the content 👍🏻

[@hvacuk8975]

Thank you mate 🙌🏼👍🏼

[@MrSanghzor]

I love to see these vids. I mostly only work on residence Aircon so small units. But in the end they all work the same to be honest.

[@Eggnog3000]

Great channel, how come it's just stopped? Just passed f gas and these vids are brilliant. More vids would be great...

[@FrostBlueFire]

I'm a little surprised they didn't have spade connections at the solenoid. Instead of having to create a wiring mess, but nice video man! I haven't worked on these VRFs, they look cool, and I'd love to learn em someday. But I hate city parking for us trade guys, so maybe not. 😂😂, Great video mate

[@christiansommer914]

Excellent work.. True super tech..

[@hvacuk8975]

Nice one mate 👊🏼👍🏼

[@coldfinger459sub0]

👍✋🏻 that hand, with your experience on Daikin and knowing the sequence of operation, put that together with the gray matter 🧠 between your ears and you have the best tool on earth As usual great content great video great learning opportunity

[@hvacuk8975]

Thanks mate 🙌🏼🤜🏼🤛🏼

[@connorjohnston3022]

No service checker or fancy computer will beat the engineers hand and intuition 😂

[@hvacuk8975]

The hand is definitely the best tool in my kit 😅

[@connorjohnston3022]

@@hvacuk8975 which one?, left or right 😂

[@DavE-bh8lz]

Always enjoy watching your videos. Thanks for posting.

[@hvacuk8975]

Thanks mate, appreciate it 🙌🏼👍🏼👍🏼

[@laworder6092]

Thanks for sharing excellent video cheers mate

[@hvacuk8975]

No worries mate ! Hope it helps some people 🙌🏼 Thanks for watching 👍🏼🤜🏼🤛🏼

[@soulmpowered]

Exellent job!!!!

[@phillichillin1716]

Nice video mate! Learned a little

[@hvacuk8975]

👍🏼

[@Clasped003]

Yo, play some Technikal or Gammer tracks in your videos. Cheers from the U.S. and love your videos!!!

[@richardbartlett6932]

Top work always a good feeling to 'get them out the shite' but , please drop the musick it' such a turn off and unnecessary. either we don't need to see you taking panels off or fill that time with a bit of rambling on about nothing :-)

[@hvacuk8975]

Thanks mate 🙌🏼 Appreciate the feedback too 👍🏼

[@AirsoftColeraine]

Awh man the music makes it. Not my kind of music but it makes the video more of an episode than just a video ✌️

[@bazbillybob4319]

Great video mate 👍

[@hvacuk8975]

Thanks mate 👍🏼👊🏼

[@kcomfortsystemshvac7060]

Hi,,,mate....good video as usual ,,,,😀 this unit it is heat recovery unit ,,,I can see it has 3 pipes ? I am right ? 🤔

[@jessec.9295]

Awesome videos thanks

[@hvacuk8975]

Thanks mate 🙌🏼👍🏼

[@neilvestervictor180]

nice troubleshooting

[@hvacuk8975]

Thank you mate 🙌🏼👍🏼

[@AirsoftColeraine]

Great stuff as always 🤘

[@hvacuk8975]

Thanks mate 🙌🏼🙌🏼🤜🏼🤛🏼

[@sterlingarcher46]

Nice troubleshooting mate , I'm kinda clueless when it comes to VRVs they all seem so overly complicated to me , thank goodness I don't work on them . For the solenoids I like to carry a voltage stick to check if they're energized , then I'll check the ohm value and/or use a solenoid magnet . Unrelated topic : since you know your gear , could you talk about which work trousers and boots you use , I'm tryna find a good confortable pair but its hard if you don't have it in front of you . I bought a pair of Scruffs trousers years ago in London , they're still going strong , hopefully when we can travel again I'll come up and buy me some new ones .Cheers mate , good one 👍.

[@hvacuk8975]

Your spot on mate, I completely forgot to mention you should check you have power from the PCB first and like you say it’s always handy to carry a solenoid magnet in your bag 👌🏼 Yes, I’ve been getting a few questions regarding work wear so I’ll definitely show you what I use in one of the next videos 👍🏼👍🏼 Thanks for watching mate 🤜🏼🤛🏼

[@Str33tF1ght1]

i love your videos i love your work ! How long does these Daikin VRV last ?

[@hvacuk8975]

Thanks mate 🙌🏼 These ones were installed in 2005 so around 16 years old. You could keep them going for as long as spares are available I suppose. Some people may look to upgrade after around 15 years or so 👍🏼

[@joewall2993]

Any chance you could speak about how much engineers earn? I know it’s a bit cheeky but it would be interesting. Cheers

[@angelagosto8327]

Nice video will like always been wanting to ask what boots are those?

[@hvacuk8975]

Thanks mate 🙌🏼🙌🏼 The boots are from a place called Screwfix if your in the UK. They are their own brand ‘Site’. 👍🏼👍🏼

[@jameshendry9906]

What software do you use on your laptop for reading? Great video thanks for passing on the knowledge!!!

[@hvacuk8975]

Thanks 🙌🏼 It’s Daikins own software and service checker mate. You have to purchase it direct from Daikin, usually involves doing the training course too 👍🏼👍🏼

[@truthmatters6719]

​@@hvacuk8975 great video sir! Can we do the training course online and if yes where do we find it?

[@EastDallasKicks]

2:33 yeah all those copper lines maybe that part of the field is billions of years out of mg league

[@OleRazzleDazzler]

could you tell me how to get the setup to hook a lap top to these? perhaps as well could you give me the software or info on how to obtain

[@votrunghieu4099]

can rattling or creaking sound ?

[@JuanTodoli]

No errors on the controllers?

[@manoelandrefilho6632]

Dear friend, i am mechanical engineer and I live in Portugal, your Company os hiring for some position in field mechanical engineer? Thanks and put more videos ok

[@muhammedafsalvayalilakuthe7588]

Hai

[@hvacuk8975]

👍🏼👍🏼

[@nureddinrepairman4963]

how to email you ???

[@KG-yn9qi]

Hello ☃️Mate! , 👋🏻👨🏻‍🦳🇺🇸, 👍🏻👀🎥, ❄️🍻🍻❄️👍😎 “hey new nick name?? Snowman!”

[@kaden4418]

0

[@jonnylilliman2087]

First to watch

[@hvacuk8975]

🤜🏼🤛🏼

[@jonnylilliman2087]

@@hvacuk8975 I love your videos

[@hvacuk8975]

@@jonnylilliman2087 Thanks mate, appreciate it 👊🏼