Hybrid Husqvarna 372 xp, comes alive

[@chrisjohnson8124]

I bought a used 372xp off FB market place and can’t believe how well it cuts. Just a new Husky 24” bar and chain. Saves my back from bending over, and cuts like hot knife through butter. Amazing saw.

[@thebradleysoncatbirdhill6849]

I want to start a petition to have Vartan as a guest on a live feed. I think we all need to thank this wonderful man personally for opening up his property for all of us to enjoy. Love you all... ❤❤❤ Lieutenant Bradley

[@martyrutter3630]

Yes my friend,Vartan has an amazing property with some nice cutting and great learning capabilities. Be safe my friend. 🙏👍

[@FTheGlobalists13]

Hey Buckin Billy, my grandpa was the one to put me on to you. I have since become a subscriber. I just want to say that your story about alcohol has inspired me to become an arborist I’m 29 years old and knowing that you didn’t start until you were 27/28 makes me feel like I still have a shot at this life. I used to be a hard-core addict to crack, fentanyl and alcohol. I’m talking homelessness for two years with only my grandpa to support me and he stayed by my side the entire time while I was in and out of detox and shelters. We were on the phone the other night talking about you and it’s made us even closer. He owns a cabin up at Bonaparte lake in the Cariboo interior. My favourite place on this earth. You’re my number one role model right now excluding my dad and grandpa. I just want to say thank you for the inspiration and the positive messages. You are truly changing lives. Mine specifically. I’m looking at old McCulloch saws right now debating on buying my first gas POWERsaw. And will 100% be installing at least a 36 inch bar so I can buck standing up. Thank you for all these videos and thank you for being such a freaking cool dude. Seriously life-changing. Thank you, sincerely. Jase G. Love from Kamloops, BC.

[@lashlarue7924]

You can do it bro. Greetings from Virginia.

[@FTheGlobalists13]

@@lashlarue7924 thank u brother

[@Helga____]

Here we are in the woods on Vancouver Island, getting the saw ready, felling a tree, and I pretty much see what you are thinking, what you are doing, and why 🌳🌲🪓🪵 That is so cool 😎. Before I came here, my world definitely was smaller. Thank you for letting us come along on this journey 😊 I'm really looking forward to the project in Nova Scotia. It's wonderful that the channel is able to help out. There are so many good people here supporting this. I love you all ❤😊

[@timtrax918artisan8]

Thank you for the classics and the modern ....... I think i like the classic 372 and an ole tassie axe of your hanging eh. No really i enjoy all your content, thank you BBR for sharing

[@scottwilson4396]

Great video Buckin ! So happy to see her settling in to your program 😊 Very excited to see what else can be done to improve this build in the future !

[@BuckinBillyRaySmith]

groovy

[@thealbo7168]

Always excited to watch your videos man. Truly appreciated about who you are. Keep on.

[@tome.joyner887]

Scotty Wilson is a good friend of mine and I am so happy for him. He is a genius when it comes to saws and judt about anything else. Buckin bless your heart for giving this wonderful guy an opportunity. You are the best!

[@scottwilson4396]

Brother Tom it is an honor to be your friend ❤

[@michaelnewman-ds3fr]

I like that pipe! That saw is ripping! Great video Buckin love to all!

[@BrandonWeinmann]

Love the looks and sound of that pipe buckin…

[@danreynolds1142]

Good to see saws in the back of the new truck 😂

[@DevonReeley]

Much love Buckin!!❤️🪵

[@GertRupczyk]

❤Buckin I love watching your videos Your always thinking about safety first .Great sounding saw

[@zackjohnson5247]

Great stuff Buckin! Glad you’re feeling good, lookin good too💪🏼

[@BuckinBillyRaySmith]

thx

[@darylpowell4388]

The bar looks awesome!!! I can’t thank you enough.

[@martyrutter3630]

Looks like you are all set for the big day with Buckin ♥️👍

[@darylpowell4388]

@@martyrutter3630 I will be all set, but I will have to see if I can handle it. 🤪

[@martyrutter3630]

Good advice on that cut, never put your trust in a tree always better to go on the safe side. Be safe my friend 🙏♥️👍

[@johnclarke8180]

Thanks for all the good work your doing, keep shining brother!

[@xavierc8383]

Clean cut on that alder. The saw sounds so good, it seems fun to run.

[@petemayea5368]

Just picked up my new walkerized 572 today. Going out Friday to feed it some wood. Love your channel 👍

[@newman7610]

That 86er is one more bodacious saw. Bound to be a pleasure to run.

[@HairlipButcher]

I have a cup of tea with a splash of milk and tabble of honey almost every evening!

[@CrumbsQ]

Good Luck in Nova Scotia. Stay safe. 👍

[@danbarth9421]

Man that sucker looks like she pulls...you can see it pullin ya in brother!!! Man it would be cool to have that circle of people❤❤be blessed brother

[@davidhuffine5084]

Sorry I don't do lives , but I watch videos . Good job helping the man in Nova Socia . Scia

[@manueldelbusto725]

That thing is making WAY more power than stock. Just by the speed and noise I would say around 8 HP.

[@harliesheltra9093]

That saw sounds so good !!

[@ishure8849]

G'day Buckin, The old Ishman had a birthday today Rams 🐏👍.

[@Atomic9t9]

Hey Billy, love the channel, thank you for all you share. I was curious why you pull up just a bit on the pull start before shutting off the saw. I know there’s a reason behind everything! Stay well friends. 2 months into my power saw journey in residential trees in NC, US.

[@lanceevans688]

Saves wear on the starter components. The motor will turn back a bit as it shuts off and it pulls against the starter pawls when it does. If you pull the rope out some, your hand absorbs the tug.

[@Creekr313]

My guess is to keep parts from slapn? Idk. He runs modified saws.

[@BuckinBillyRaySmith]

if yer rope doesnt pull back on yer model then dont worry about it friend

[@LIF1395]

Buckin mentioned it a while ago I think he said A safety trick. So it starts easier next time with the pull rope at the right position

[@stevenlaxton3618]

Buckin have you ever tried the Lordco bar oil? I had to use it this past winter until a few weeks ago for my winter job and I must say I was impressed it seemed to have nicer tackiness than the husqvarna stuff and I liked it being dyed red. Hope everyone out in Buckinland is doing amazing!

[@Alexhulk]

That powersaw is wonderful

[@wonkyburn4278]

awsome camera work

[@UncleMattysGarage]

Just got a gallon of dgp oil in the mail yesterday!

[@Why2why]

Ok before making any scarfing or cut in a tree you CLEAN around the tree first any trip hazards any court up branches clean around the tunk of tree then make your scarf and back cut

[@Timberjack.loggers]

That saw is definitely alive in the cut . Looked like in the video you shown the 500 I was ahead in both cuts a little bit . Interesting love watching !!

[@BuckinBillyRaySmith]

indeed it was , this saw is stronger than the one in that clip

[@haroldhodge7770]

Great video Buckin

[@jamesbeeman8192]

When do you wear the eye protection you have? 🤔

[@rickstafford5316]

Nicely coming around

[@beerbuzz62]

Another Amazing video from Buckin,thanks and keep em coming

[@Alexhulk]

I think if you get the gullet.. It cut bit less but stronger top plate..so cut longer time

[@cheapsmoke4096]

bucka roninskins hahaah love it

[@proforest1]

Power good, exhaust is brutal😂

[@R_Wyatt545]

Should come out like gold; that’s what it takes to buy it 😉

[@haroldhodge7770]

Very nice saw I would like one of them

[@radleytube]

Are you going to be filming in novia Scotia ?

[@BjornVandewalle]

What kind of helmet do you where and what brand is it?

[@deweyfischer1809]

Quick question Buckin, I have a young man working for me cutting brush and firewood. He’s helping clear my property and is a good worker. He graduates high school in June and I would like to buy him a power saw. He’s good with a saw and is very safe, what saw would you recommend for a beginner but not a novice? Thanks my friend

[@BuckinBillyRaySmith]

ive been super impressed with the husky 562 mark 11 and the 572

[@darrellmills6458]

going to nova scotia my friend . thats home for me

[@Poolguppy101]

It sounds like she'd use an 8 tooth sprocket nicely if there isn't one on it!

[@smarine4]

Is this a 372 regular or a 372 XTorq???

[@Sasquatchflow]

Buckin how come you don’t wear safety glasses? ✌🏻🇨🇦

[@BreakOutOfTheAlgorithm]

Love your channel brother!👁️💓🤠👍🔔

[@andrielrock]

Good evening, What is this song that plays at the beginning of the video? Where is the meeting?😙 Nice song!

[@CalebBrown-nz7gh]

What muffler is that?

[@AaronMorgan-g9h]

People think you need thick tack in bar oil. You do not. It only holds stuff. And makes more wear !!! Just like you never grease your tips !!!!

[@hchalmoepas6544]

How many people from the BBR army is going to help this man and family in N S.

[@Dunlap-uj5zl]

👍

[@Alexhulk]

Wouhouhou PAVAROTTI ❤❤❤❤

[@williamcarpenter2126]

Hey buckin, how you been doing, I'm fixin to order a 500i from the ripsaw boys, what is the best chain to run on that saw for cutting oak with a 25 inch bar

[@BuckinBillyRaySmith]

full chisel

[@paulgreco2188]

💪✊

[@justinwalker9178]

Hey buckin where does a guy find that muffler for a 372 husky

[@Thejohnmullen]

Soupakoolsaws

[@Alexhulk]

Love the enterprise pipe Hihihihi

[@nateolmsted899]

I would love to see it in some Michigan hardwood

[@jeffroberts760]

Agree, I don’t watch any chainsaw guys that cut hardwood, so I’m curious how my saw compares to others who cut hardwood Do you know any channels where the guys cut hardwood?

[@carlzirk]

I cut through very solid oak with 372. I'm in MI. The chain could have been sharper, but cut no problem.

[@nateolmsted899]

@@jeffroberts760 Charlie Briscoe

[@robertblacksmith4355]

Howdy Buckin 😊

[@BuckinBillyRaySmith]

howdy

[@jacobkemp1183]

Nice saw 👍

[@1944chevytruck]

BE KIND

[@JasonBlanton-g1j]

Anyone got a carb or big bore kit for 371 xp ?

[@brp333]

What kind of files are those? Boy they remove material!

[@BuckinBillyRaySmith]

could have been Oregon

[@brp333]

@@BuckinBillyRaySmiththen 12 pack ordered! Thanks for all you’re doing for us God bless

[@marcduclos9789]

Me too

[@MATT.MAN-PEACE-LOVE]

iiiiiiiiiiiiiit’s tiiiiiiiiiiime!!!! ✌️❤️🌲🪵🪓🐝

[@Alexhulk]

I stay whot what you showed me firt Get the gullet ❤

[@Alexhulk]

How far is nova Scotia from where you live buckin ??

[@Thejohnmullen]

Probably about as far as he can go and still be in North America. He’s on the opposite coast

[@jonmccormick6805]

3600 to 3800 miles. Northwest of Washington state to the Northeast of Maine.

[@Alexhulk]

@@jonmccormick6805 wow that is serious HELP

[@Timberjack.loggers]

Ruffly 4500 km if he flies an 6300 km if he drove

[@Alexhulk]

@@Timberjack.loggers awesome dude that Buckin

[@aussiehardwood6196]

Anyone else notice the Sasquatch in the background #10:38. I know what I saw...! 🦍

[@critterg8493]

Hi friends

[@Impeach44]

Hey Billy this may sound dumb but I notice you and Tinman and some others pull your starter cord a bit just as you shut your saws down what’s the reason behind that?

[@jethroboorer2860]

Hey mate. As the flywheel slows the pawls swing in and catch the starter. It yanks the cord in ya hand like a shock absorber instead of making the rope and handle hurt. That clunk you hear every time you stop your saw. Try it :) you'll see

[@FabAcres-Blackcat]

Internet cool points is the only reason

[@jethroboorer2860]

@@FabAcres-Blackcat it's standard mcculloch shut down procedure. In the book

[@d.ahwooomazenkas8075]

Ahwoooo get one 👍

[@anthonypryor2852]

Cool

[@Alexhulk]

No more get the gullet... Hihihihihi

[@Alexhulk]

Strange pipe😂

[@abrahamjimenezgarcia7135]

🪚🪵💪🏼