How does a centrifugal pump work?

[@ИльнарГараев-ь9ш]

Thanks for the video! It would be nice to have more videos explaining the designs of pumps.

[@JOETV12345]

More videos on pumps and compressors for all my fellow HVAC techs out there please and thank you, super informative and a big help to put what I'm learning into perspective

[@hydraulicandpneumaticsyste3253]

thanks for the comment

[@finn_7306]

This really helps understanding the different pump designs. Good animation as well as narrator

[@nooraldeen_2004]

Thank you very much for the clarification of noticing that the manual transmission becomes very heavy. Also, the 3phase motor should be better than the single phase, because the torque is very strong. Water can rise approximately 1km per minute, depending on the size of the engine. If 10HP, water can rise more than 1km per minute.

[@florentinosanchez3969]

Ive been hors looking for a video as good as this in youtube and this is the only very good one

[@hydraulicandpneumaticsyste3253]

Thanks

[@alirezaasadbeigi584]

Thanks for the video. Really helped.

[@IsaacPrah-dy1vq]

This video is very knowledgeable and I want more

[@hydraulicandpneumaticsyste3253]

Okay, I'll try to make a new video

[@christiancarassai9540]

Man, great animations!!! Waiting for more pump designs. Subscribed right now...

[@hydraulicandpneumaticsyste3253]

Thanks. More videos coming soon

[@beaclaster]

found gear pump video, browsing your channel and chose this, likes your voice from that one better

[@hydraulicandpneumaticsyste3253]

Thanks. English is not my native language, the video is voiced by an announcer. The video about the gear pump was voiced by a person from Latvia, an accent is possible there. It turns out that the announcer who voiced this video did better?

[@amalantony8594]

@@hydraulicandpneumaticsyste3253 Yes, this one is better in my opinion.

[@sheraznasirkhanbhatti5707]

Very informative Information Thanks.😊

[@_P0tat07_]

Hi. Can you do a video on diaphragm pumps?

[@hydraulicandpneumaticsyste3253]

I will try

[@jordanwebster5077]

Thankyou

[@ckdassanayake8092]

lots of doubts and confusion Ares about this pump is now clear. thank you

[@chuckcawthon3370]

Outstanding video presentation

[@mrafra4346]

السلام شكرا على الشرح محتوى جد رائع هل يمكن زيادة المرواح لسحب الماء من بئر عمقه 200 متر وتدويرهها بمحرك سيارة

[@hoseamare]

Excellent explanation with 3D illustration 👍🇵🇬

[@hydraulicandpneumaticsyste3253]

Thanks

[@ToesUpTommy]

How about a video on centrifugal pumps in the fire service? They can be switched from series to parallel. Also, explain cavitation in a fire pump please!

[@THANHTOANPHAN-u2v]

can you descript about pump cavitation. Thank you so much

[@ashna561]

Thank you for such a good video...

[@patrickluswili7258]

I want to know more about pumps..how to fix them and maintain

[@colloupdated]

go ahead and do it

[@kylealexander7024]

Can u do wine pumps specifically?

[@ericpilboue3276]

Bien, j'adore, surtout les animations, sinon, j'en ai démonté plein des pompes mais surtout des rotors noyés.

[@alihosseiniroknabadi4828]

fantastic I love this video

[@stefanov92]

Good job !

[@MarissaPutong]

What kind of waterpump can be suitable for a deep well? How many HP id needed on that pump?

[@QuillénWhitset]

Appreciate the detailed breakdown! 🧐 I have a quick question: 🤷‍♂️ I only have these words 🤔. (behave today finger ski upon boy assault summer exhaust beauty stereo over). Can someone explain what this is? 😅

[@rodolfojrcompleza9021]

thanks for this nice video.... do you have a video about how pressure switch work?

[@hydraulicandpneumaticsyste3253]

I haven't made a video about the pressure switch yet

[@nelj3376]

Welcome to 50N Sub! 🌹❤✋👍

[@bashirshuaibuadam2005]

Good day, I really enjoyed the video, which is very educative. My question is that, can I use centrifugal pump to suck water from 10 meter deep Borewell?

[@hydraulicandpneumaticsyste3253]

Thanks. If you want the pump to be on the surface at the same time, then it is impossible, because of cavitation. In this case, you need to use a submersible centrifugal pump and lower it into the well.

[@faisalalghannam1519]

If we have water and oil , the pump start to pump what first and why?

[@jacobmusgrove701]

You should do a video on axial piston pumps

[@hydraulicandpneumaticsyste3253]

Ok

[@vikramraoklvicky2862]

Please make videos on Backheads and its functions

[@florentinosanchez3969]

Very nice video

[@hydraulicandpneumaticsyste3253]

Thanks

[@rohithkumars6539]

What is the solution if the pump is over designed , Pump is tripping frequently

[@rajendrarathi1314]

Can u have video of electro magnetic pump

[@tobiasshifula5486]

thank you very much,it will be a pleasure to have more detail video

[@hydraulicandpneumaticsyste3253]

ok i will try to make it

[@finn_is_red]

Hi, verry good video ! But what's the thing between the casing and the electric motor ? Is it just a place to have some bearings ?

[@hydraulicandpneumaticsyste3253]

The pump impeller is cantilevered. This wheel is heavy. Therefore, two bearings are used. They are installed in the crankcase. There is oil in the crankcase, it lubricates the bearings.

[@finn_is_red]

@@hydraulicandpneumaticsyste3253 okayy !! Thank you verry much !

[@kylealexander7024]

​@@finn_is_redthis is where the break point is as well. Many pumps have a gear looking device here

[@TJBEATSAMV]

Thanks !

[@davidanum7249]

Please can a water pump pumps well without an impeller eye ?

[@hydraulicandpneumaticsyste3253]

Additional hydraulic resistance will appear, but it should pump. The characteristics of such a pump may be worse.

[@sumairanoor4265]

what will be the output of 2 centrifugal pumps if one is attached horizontal and the other is vertical as it seems in the RO water system??

[@hydraulicandpneumaticsyste3253]

In this case, it is important whether the pumps are installed in parallel or in series. With a parallel installation, the flow characteristics will be added, and with a series installation, the head (pressure) characteristics will be added, and it does not matter if these pumps are horizontal or vertical.

[@sumairanoor4265]

@@hydraulicandpneumaticsyste3253 thanku sir

[@sumairanoor4265]

Your videos are amazing n informative

[@yassinramazanamin9525]

thanks Dude❤

[@OsvaldoQuezada-v3e]

Muy didáctico el vídeo

[@oloruntobaoluwadarewasiu8045]

Long life and prosperity

[@quanghungtran3437]

what is the allowable speed of the liquid in the pipe m/s

[@hydraulicandpneumaticsyste3253]

in suction pipes 1 m/s, in pressure pipes 2 m/s

[@quanghungtran3437]

If the valve is locked at the pump discharge line, what will happen?

[@hydraulicandpneumaticsyste3253]

The centrifugal pump will operate at maximum pressure, according to its characteristics. The pump housing will not break, the pump will pump liquid into a dead end. Such pumps do not have a hermetic separation of the suction and discharge lines, which means that the liquid will simply flow from the discharge to the suction inside the housing. The pump will pump the same liquid inside itself. If it works like this for hours, the pump may heat the water too much. This can cause the drive motor to overheat.

[@quanghungtran3437]

@@hydraulicandpneumaticsyste3253 Thank you so much

[@zayyatuscience7764]

ရေအဝင်ဘက် ထက်ဝက် ခြမ်း ဘက်ကို မှန် သို့မဟုတ် ကော်အကြည်ပြားနဲ့လုပ်ပြပေးပါလား Please Sir,Can you show me with half pvc mirror side of impeller cover.

[@Uniqueinventor]

thanks for vedio

[@2002budokan]

Which software do you use for these animations?

[@hydraulicandpneumaticsyste3253]

Cinema 4d, octane render

[@LEGOLAS-xi2ew]

one of the best vedio very good animation

[@widcoshop]

hi can i use this clip in my website?

[@hydraulicandpneumaticsyste3253]

You can embed KZbin player with this video on your website. Under the video there is a button to share, then select the option to embed, and place the code on the site.

[@widcoshop]

@@hydraulicandpneumaticsyste3253 thanks but in my country youtube is filter i should download it..do you allow me to use your video in my website?

[@d.haroldangel241]

excellent thumbs up

[@hydraulicandpneumaticsyste3253]

Thank you

[@rezeenachinthamalla6325]

Super Awesome!

[@hydraulicandpneumaticsyste3253]

Thanks

[@ariflodhi873]

May I use this video for subtitling in Urdu.

[@FarahNuurjibril]

Good lesson

[@physicsbystanprisajny6284]

Dumbledore spell to infinity is ur motor minus a Dumbledore spell?

[@quanghungtran3437]

Can I ask you something ? What does NPSHr parameter mean in pump selection

[@hydraulicandpneumaticsyste3253]

NPSHr (Net Positive Suction Head required) - the required cavitation reserve, i.e., necessary for the operation of the pump - the required pressure value at the suction pipe of the pump.

[@sankarkrishnan1050]

very informative video

[@venkatsubramanian3601]

WHICH SOFTWARE USING TO MAKE THIS ANIMATION VIDEO SIR

[@hydraulicandpneumaticsyste3253]

Cinema 4d

[@allonrasheddelacruz5547]

Create a video for purifier

[@Fourstrokeriders]

explain centrifugal pump with a pressure tank

[@Edalet_]

👍👍👍

[@kazitawhid8190]

Hi. I am Kazi Tawheed. A content creator from Bangladesh. I like your videos. I want to convert your videos into Bengali and make the videos understandable to the people of our country. And if you allow, I will upload you in my video with full credit and channel link.

[@hydraulicandpneumaticsyste3253]

Hello. If you provide a link to the original video, you can do this for Bengali

[@azitexplore]

Two way both together

[@rk4124]

what will happen if we are not going to prime the pump?

[@Jean-vz8co]

En Arabie Saoudite j'ai vu des pompes immergées à 1200m de profondeur... diamètre 25 cm.. longueur 4 mètres ... moteur 2 mètres... 24 turbines.... Moi dis toi!!!!.......................

[@NatalieGrossman]

"The mass of air particles is much lower than that of water particles ..." (3:35)?? That's not right - O2 and N2 particles, which comprise 99% of air, have twice the mass of H2O particles (water). No question you need to prime the pump, but your explanation of why that's true makes no sense.

[@llywelynyllevyn1176]

If those steam turbines were built more like this pump they would be much more efficient and require far less steam to operate. Look at those steam turbines they use to generate electricity, tremendous amounts of steam to make them spin. 5 billion tons of coal we are burning to make steam to get those things to spin. Good water pumps are the future, we are going to have to save our river water and pump it in order to irrigate crops and move water over land. We are going to have to dredge in order to fight rising sea levels. We are going to have to dig canals. We need to stop wasting kerosene in these huge jet planes and use that fuel to dig lakes and pump water. The earth is drying up and the deserts are growing. We are going to have to plant billions of trees and water them. High efficiency pumps are the future. Saving and moving water is the future, reducing our coal consumption is the future. Saving oil and fuel. Driving to the office 5 days a week is a waste. Manufacturing is the future. The office produces nothing but cost. Office buildings are a waste. Stay home save fuel and eat. That's less expensive. Pump water not gas. LLXIIX77

[@dannyo3317]

"Shit Slinger Pumps"

[@jollyscaria1922]

Pump shaifit and inpmalring flwing motor working flwing ruing pump air removring water pasding sooth heavy lord sooth woring pump using disining centry ful pump chil water systusing meany typ stage using sre 2nd stages modes using

[@abdullahaedar4668]

m

[@vickykhan9414]

Sir please remove English wordings we can't see properly

[@hydraulicandpneumaticsyste3253]

You can hide subtitles by clicking the button at the bottom of the video player

[@theskillsguru1476]

HI, I want to use part of this video in my course. Ours is an NGO from India. Kindly send me your email address, so that I can send you official email to seek permission.

[@sharadsonawane8182]

Very nice video

[@hydraulicandpneumaticsyste3253]

Thanks

[@Edalet_]

👍👍👍

[@Edalet_]

👍👍👍