Hydro Blasting 101

Рет қаралды 17,998

Jason HARDING

4 жыл бұрын

Jetstream 20k

Пікірлер: 48

@LovingIdaho 5 ай бұрын

Yep , I started as a laborer doing that in 1988. $5.50 and hour . In 2012 ,,I was operations supervisor and hiring laborers at $18.50 an hour .

@evanelizalde5518 Жыл бұрын

Shitty job but it pays the bills. Hats off to fellow hydroblasters and vacuum technicians! Rain , sleet or snow we're out there doing it!

@Undiscoveredplans 10 ай бұрын

Any advice? The pay seems decent and I have an interview with one soon and I think the most intriguing part about the job it’s traveling and being away for a week or two at a time doing jobs all over the country.

@evanelizalde5518 10 ай бұрын

@@Undiscoveredplans okay so this is going to be a runoff sentence but here it is. Q: Where are you located at location can mean certain industries also length of seasonal weather . I personally used to travel on a road crew but am at a permanent location at a latex plant . The industries that you could be working in food processing , latex / polymer , oil / gas , wood / paper mills Etc do you have experience in heavy industry you're going to be in places where there is bare minimum safeguards everything's covered in oil or something you don't want to get your hands on you'll be working with chemicals / machinery that can potentially harm or kill you'll have to be entering tanks potentially on a regular basis unless you can clean them from the top or use a 3D everything is incredibly loud from the equipment you use to the plants you'll be at if you're going to be on a road crew then hopefully they'll pay you an hourly wage to drive there and back and give you per diem and expect anywhere from 40-80 hours a week give you an example we showed up to a job 6 a.m. start we didn't get back to the shop until 3 a.m. be safe be aware of your surroundings you will have to trust other people with your life and vice versa it's a nasty job you're going to get dirty a rain suit and a tyvek suit are going to be your friend in the summer you'll be working in furnaces vacuuming in the winter you'll be lansing lines 150 feet up in the air getting covered in ice bring spare clothes ibuprofen and Band-Aids if you're not blessing you're still going to get soaking wet guarantee it be very careful blasting and be very careful vacuuming these tools if you're using them need your full attention but you also have to be aware of your surroundings. Remember what I said about the rain suit well in the summer it's going to cook you alive but other than that pretty good job just don't fall into peer pressure some people in this industry are straight-up hardcore alcoholics oh yeah and those tools like the shotgun Spinners straight tip whatever you're using if it's 10K 20K or 40K never ever point that at yourself or others I've seen those wounds they ain't pretty show up on time every day and you probably not going to have a problem be safe don't do nothing stupid and then just build up seniority.

@suprarose1584 8 ай бұрын

@@Undiscoveredplansdid you ever get on there? I'm on my second day of orientation, and I'm having doubts about me being able to use the blaster since I'm only 133 pounds, and sorta strong lol

@Unknown-gp9lj 8 ай бұрын

@@suprarose1584im 140 and been doing this for a year and 6months aint nun to it just stance, lean forward and put that hose in front and in between ya legs

@OldManJenkins23 Ай бұрын

@@suprarose1584did you stay on? how are you handling the blaster now?

@matthewharmon4802 Жыл бұрын

Good blaster don't need to see, just hear... good job bod

@matthewharmon4802 Жыл бұрын

**bud

@vishnulutchmansingh 10 ай бұрын

What an hour the paye is

@cruz8458 6 ай бұрын

@@vishnulutchmansingh Like 20 lol

@SpeedyP.D. Жыл бұрын

Gawd i loved watching this done that myself many times ,hard to explain what we do this video nailed it thanks

@SakurabaStyle39 Жыл бұрын

One of the most brutal jobs there is. People have no clue

@kobeshaq1320 Жыл бұрын

@@SakurabaStyle39 explain

@kenzellio Жыл бұрын

@@kobeshaq1320 pressure washing with high pressure equipment

@Nigel_DeLaVega 2 жыл бұрын

Going around the circumference makes the middle easier

@wilfredoWilleFaz 3 жыл бұрын

Good old days wheres this at?

@crabmansteve6844 Жыл бұрын

Im assuming this is essentially just industrial scale pressure washing yeah?

@sunobl1112 4 ай бұрын

Yes. Although there are many forms of hydro blasting. This is shotgunning. Theres: shotgunning, flex lancing, stiff lancing, line moling, 3d, automation. A pressure washer could cut you. A 10k WILL cut you. Possible amputation.

@WhiskeySins 3 ай бұрын

@@sunobl1112 and lets be honest, the shotgun is the most fun one to use.

@TonnyMaraisek-te6up 3 ай бұрын

They use the parraguda nozzle to clean the pipe

@diegodebello26 3 ай бұрын

Good afternoon, how are you ? Do you hire employees from other countries to work in your company? I have experience with high pressure pumps and also in hydrojetting. I would like an opportunity.

@sunobl1112 4 ай бұрын

For those saying just use a 3d. It would take way longer to 3d. More than half the time the nozzle won’t be focused on the product.

@Colby-cy7sl Ай бұрын

What about a 2d like a spider

@Colby-cy7sl Ай бұрын

That’s what we use on shells

@sunobl1112 22 күн бұрын

@@Colby-cy7sla 2d would be better but then you have the issue that the pipe is laying horizontal. You’d have to find a way to hang it in the middle. It’s really just easier to shotgun.

@baytownsgreatest 2 жыл бұрын

Why not just put a 3D in there? Ain't no way ill do this job with a shotgun

@HusseinAli-or6lu 2 жыл бұрын

What do you mean by 3d?

@emmanuelmuhd 2 жыл бұрын

Same thing I said. No way

@elihu1l 2 жыл бұрын

It's referring to a 3way directional nozzle, AKA a 3D. There are different kinds and types for different kinds of pipes or tanks known by names such as a 2D, 3D, barracuda, badger, banshee, etc but they all clean with high pressure water.

@Hulkxiliary Жыл бұрын

Definitely could’ve! Seen it done before. You keep the lid on there with some screws then throw the 3D in there, screw the the lid to cover just enough to come out on the sides and let the 3D work.

@cole5111 9 күн бұрын

Facts