Hypex NC502MP Class D amplifier from Buckeye Amps | Kit Assembly | Full video

  Рет қаралды 11,467

Busy Gadgets

Busy Gadgets

Күн бұрын

This is the assembly of the Buckeye Amps NC502MP kit assembly. Sorry about the low volume when I tested the Klipsch RF 7 III for some reason my mic is able to pick up the sound correctly.
You can find the info of this in:
www.audioscien...
Hypex NC502MP info:
www.hypex.nl/p...
I cannot find a proper review and measurement of this amp but Audio Science Review did review its sibling the NC252MP so hopefully they are not so much different:
www.audioscien...
DAC used:
Topping DX7s
Roon referral program to get 30 days free:
roonlabs.com/r...

Пікірлер: 31
@Imhalfamazing2U
@Imhalfamazing2U Жыл бұрын
Thank you for posting. These type of videos are helpful.
@itisjustacomment
@itisjustacomment 7 ай бұрын
Nice speakers, the RF7-3 's
@itisjustacomment
@itisjustacomment 7 ай бұрын
A 6:28 i had to think twice why you made a loop with wiring , then it dawned on me . Its late , give me a break.
@squared80
@squared80 2 жыл бұрын
Did you push the RF-7 III's? Any issues driving them hard with this amp?
@busygadgets7537
@busygadgets7537 2 жыл бұрын
I cannot push it in the apartment but sounds very clear at loudest as I could without getting compain from the neighbor.
@squared80
@squared80 2 жыл бұрын
@@busygadgets7537 Thanks for the reply. You need to let those awesome speakers BREATHE!! :)
@DarienCharlton
@DarienCharlton Жыл бұрын
How much do you save if you assemble it yourself?
@busygadgets7537
@busygadgets7537 Жыл бұрын
Unfortunately there's no savings. I just did it for fun. 😀
@joaquindominguez3846
@joaquindominguez3846 Жыл бұрын
I feel really dumb asking, but I just got a Buckeye amp and trying to figure out how to connect it. It has 2 XLR channel inputs, but the preamp has 2 RCA outputs. Do i connect both to one channel or does each RCA cable connect to 1 channel via an XLR adapter?
@busygadgets7537
@busygadgets7537 Жыл бұрын
You will need a preamp that also have xlr outputs. Xlr to rca cable maybe works but I have not tried it.
@anandshah71
@anandshah71 Жыл бұрын
Get a rca to XLR cable
@anandshah71
@anandshah71 3 жыл бұрын
How is the sound quality of Hypex what amp were u using earlier Also how much does it heat up Does it go in standby when not playing music
@busygadgets7537
@busygadgets7537 3 жыл бұрын
You can check out my other video in regards to sound quality and heat. I also added how power it uses from the wall.
@anandshah71
@anandshah71 2 жыл бұрын
@@busygadgets7537 can’t find the video that you mentioned can u give the link After a year are you happy is it stable
@Phloored
@Phloored Жыл бұрын
@@anandshah71 hi , the hypex amps are very good and used in very high end systems. They are i think like 94% efficient and run cool when compared to tube or class ab or class a amplifiers. They are a great value. I have a set of active speakers with the older ucd amps from hypex built in and they are 12 years old and still play fantastic. I'm saving up for three new x models that will come out out maybe get the lanai diy model from hypex.
@anandshah71
@anandshah71 Жыл бұрын
@@Phloored yes love the performance have 122mp and 250mp and the 502 but the 502 heats up a lot so I think one should use heatsinks than a thin enclosure as in the video Also even if I away and the amp is on but the music is not playing the 502 remains on doesn’t go in standby and remains hot
@Phloored
@Phloored Жыл бұрын
@@anandshah71 that's interesting. My ucds are built into the cabinets so i don't know if they are getting hot. I'm eager to try the new diy lanai kit that they will release this month. I hear it's remarkable.
@deebeee9218
@deebeee9218 3 жыл бұрын
what are you using to mic the speakers audio?
@busygadgets7537
@busygadgets7537 3 жыл бұрын
Im using the rode wireless go microphone.
@jadan2000
@jadan2000 2 жыл бұрын
Hi do you have to assemble these amps yourself?
@busygadgets7537
@busygadgets7537 2 жыл бұрын
You dont have to. This is normally sold as assembled but I asked the seller that I would like to assemble it myself.
@urtney
@urtney Жыл бұрын
@@busygadgets7537 Was there a huge price difference if he sends you the kit and you do the assembly? If so, what is the price difference he offered between fully assembled and delivering to you as a kit?
@pilingswito4283
@pilingswito4283 3 жыл бұрын
Murag ni balik ka sa imung talent sa una lageh noy hehehe
@busygadgets7537
@busygadgets7537 3 жыл бұрын
Hahaha. Dugay naman ni.
@pilingswito4283
@pilingswito4283 3 жыл бұрын
@@busygadgets7537 🤣🤣🤣
@ExcellentSycamore
@ExcellentSycamore 17 күн бұрын
Lewis Scott Davis Jose Johnson George
@nantrix1
@nantrix1 2 жыл бұрын
taga asa diay sir hehehe.
@busygadgets7537
@busygadgets7537 2 жыл бұрын
Hehehe secret😄
@nantrix1
@nantrix1 2 жыл бұрын
@@busygadgets7537 bitaw unsay paminaw nimo ana nga amp? maayo? dili nipis ug tingog?
@busygadgets7537
@busygadgets7537 2 жыл бұрын
Tibook siya ug tingog. Flat siya ug timgog ug depende nalang unsaon nimo pag setup imo room or mogamit ka equalizer ok ra pud. Di rako kabantay sa tingog kung ikompara sa class ab. Di ko kaborak diri kay naa ko sa apartment gapoyu. Taman rako sa volume 10 out of 80 sa akong dac. Murag mao pud ni gamit sa brand nga McIntosh sa uban nila nga mga model.
Most talked about Purifi Class D DIY amplifier. Discussion / review
13:28
My daughter is creative when it comes to eating food #funny #comedy #cute #baby#smart girl
00:17
Fake watermelon by Secret Vlog
00:16
Secret Vlog
Рет қаралды 15 МЛН
Hypex Ucd180st Stereo Amp Build
29:22
The DIY Audio Implementers
Рет қаралды 4,7 М.
CLASS D SUCKS!.. Oh really? | Starkrimson Review!
10:06
New Record Day
Рет қаралды 42 М.
Tutorial - Build your own Eigentakt Power Amplifier
10:06
Alpha Audio
Рет қаралды 32 М.
Class D amplifier basics for DIY audience designers part 1-6
37:07
Guntars Smits
Рет қаралды 44 М.
VTV Purifi Amplifier - Best Value 2021?
18:49
DIY HiFi Life
Рет қаралды 20 М.
Class d amplifier boards overview part 1
17:20
Guntars Smits
Рет қаралды 10 М.