Hyundai Getz camshaft position sensor replaced (How To)

[@mynameselle9791]

good video, thank you! timestamp of sensor location is 11:30

[@failingsentulfailingsentul2311]

I owned a getz too. Mileage 122k Kilometers, the engine light turn. Thanks for your tutorial.

[@Carfanatic-kt8rr]

this is very clear and well explained! nice job man and keep doing it right! cheers

[@MarkoAmin]

Very nice

[@dannyblondu23]

The sparks plug you have to change them every 6 months or 1 year. My i do it every 6 months and all the filters. Good video 😊 thanks 👍

[@yannis486]

Thanks for the information and tutorial. My Getz at 122k km has the exact same problem. I think it was caused because of a fuel saver i installed, or an octane improvement liquid i put in the gas tank.

[@Mishaa_g]

Do you have link where to buy the crankshaft?

[@benedekvarga9199]

Hey man i need to chabge this too but i cant put it in because it has some kind of glue in it do you have an idea how to remove that glue kinda thing thanks for the video man

[@MrTesla-ry5du]

What type of obd are using i do have hyundai getz 2007

[@WarpDriveM]

I've used a generic obd2 Bluetooth scanner

[@MrTesla-ry5du]

Tnx sir

[@cudjoeadu4464]

How can i get some of the OBD. i m in Ghana

[@hedpt]

Did you had some problems getting started the engine sometimes?

[@WarpDriveM]

When the camshaft or crankshaft sensor goes bad usually you cannot start the car anymore....or after a very long crank turns....I did had problems

[@hedpt]

@@WarpDriveM Im having problems when i try to start the car after using it for a while, and i have that error code P0340, already bought the sensor now its time to getting it replaced

[@maestro-rcboat9881]

..mine starts to appear everytime i rev hard. There are minimal oil leaks coming from the turbo part.

[@olddognewtricks4804]

Hi, did this work long term? or did the fault return? Thanks,

[@WarpDriveM]

It was long term solution. The error did not came back

[@artorias550]

It is a miracle that your car started with this error. Oil also seem to be very old.

[@WarpDriveM]

I know...but the error was on the dash after I've started the engine

[@kristhiamalvarez]

Thx for the video. I have a Getz 2011 which does not start bc of the Cshaft sensor. But it shows no engine light on. Is that normal?

[@teresalenis9288]

tengo un Hyundai Getz 1.6 modelo 2011.lo tengo hace 2 años no he visto encender la luz de el check engine.alguien sabe si éste modelo no la enciende.?...Si alguien me puede confirmar.muchas gracias...

[@yamato_koizumi2005]

Really Nice 👍🏻👍🏻

[@roomaldosti410]

du hast gut gemacht super

[@WarpDriveM]

+roomal faqirzadah danke dir! 🍻

[@shanetravis2550]

What app did u use ive had a couple but most dint work ?

[@shanetravis2550]

Good video but would u not be earlier taking the leads of just to give your self more room to move

[@WarpDriveM]

+Shane Travis i've used OBD facile app but the premium version. U can buy it from Google play or app store.with the free ones you can't do much

[@henrikschumann5683]

Hi super gemacht hättest Mall noch ein auf deutsch machen sollen da ich persönlich nicht ganz so der englisch Sprecher bin aber super Video 👍

[@carmelcassar5060]

Any one can help, with this problem? My 2003 Getz will not pick up revs again immediately on pressing the accelerator pedal, after easing on slowing down or stopping. It will pick up revs again after flicking the accelerator pedal a number of times, and runs well again, for a day, or even weeks, till it does it again.

[@WarpDriveM]

Carmel Cassar if u don't have any error on cluster it could be some false air or a problem with your mass air sensor

[@metaphor1998]

Try check the plugs, cable plugs and coil plugs..

[@rsbl6664]

Skines minus kabal sa baterije 1min i greska se obrise🙋🏻‍♂️

[@leighgray8537]

My bother said mine revs a bit high and it maybe a sensor,...

[@WarpDriveM]

Normally when it revs high it could be the clutch...its slipping

[@tnamen1307]

@@WarpDriveM please show more videos on HYUNDAI cars particularly i20 2011 model.

[@abuzabuzz6318]

well done...

[@peterwilson5528]

More likely it breaks in half.

[@hoti775]

Bunda bach