Hyundai Terracan - How to install AVM locking hubs

Hyundai Terracan - How to install Avm locking hubs.
‐-------‐---------------------------------------------------------------
tolls you need:
8mm Allen socket
torx T15
AVM 443 locking hubs
------------------------------------------------------------------------
if one of the hub bolts are ruined - this is the part number
51715H1000
or
51716H1000
-‐---------------------------------------------------------------------

[@bugayev]

excelente video, yo puse los mios de mitsubishi pajero comprados por aliexpress y han salido buenos

[@justfixit5718]

Mitubishi pajero, l200 and hyundai terracan is the same locking hubs. Great to know that aliexpress sell them and they work good 😀

[@bugayev]

@@justfixit5718 si, son una copia exacta de los AISIN, SON IDENTICOS Y YA LOS HE UTILIZADO BASTANTE, SOLO HACE FALTA UN BLOQUEO DE DIFERENCIAL PARA QUE MI TERRACAN SEA UN MONSTRUO

[@luiscanales6466]

Para que sirve

[@Luigi-jr4mo]

hello .... do they work? in what percentage, 100%? at what speed do they risk breaking point?

[@justfixit5718]

They work amazing.. 100% there is no connection to the breaks..

[@gs6273]

Why is it convenient to mount them?

[@justfixit5718]

You put locking hubs when you want to keep your drive shaft, axle berring and more. When it on 2×4 those parts are not moving.. Just when it on 4x4 it's engaging.

[@gs6273]

@@justfixit5718 OK thank you . These hub locks don't take out the vacuum motor, right? If I understand correctly, I also have the possibility of driving with reduced gears only with rear wheel drive, I hope I have not said bullshit ...

[@justfixit5718]

@@gs6273 There is no connection to the vacuum pump. When you put the mode on a 4X4 in a car, you must put a 4X4 at the locking hubs. If not, the differential will work but will not transfer the power to the front wheels. You should know that once you are in 2X4 mode in a Hyundai terracan (in the car) you are in rear-wheel drive. You can change gears regardless of front / rear drive

[@adammotomaniak7312]

@@justfixit5718 Hi ! After AVM assembly, can I drive with the AVM 4x4 blocked, but I have 2H on the knob?

[@justfixit5718]

@@adammotomaniak7312 Of course you can :)