I bought a set on the Bay. UNBELIEVABLY cheap!!! I am so glad you made this video because I haven't got them yet but I did see the steel arbors which really excited me. I think that red stand is to use while you remove the arbor. I'm going to see if it fits my Bergeon right hand handle and if it does I'll buy a left hand handle. I'll be interested to see what they look like next a Bergeon. The owner of Bergeon must be a multi billiionare!!!
@gregkeller33015 күн бұрын
🙏🏼 thanks
@gpraceman Жыл бұрын
The biggest issue that I had with the cheap sets was that when I found the right size winder to fit the barrel, it would not accept an arbor large enough to fit the mainspring. My solution was to drill out the arbor holes on some of the winders to accept larger arbors. Still I had some mainsprings that needed larger arbors than the cheap set offered. So, I added the Bergeon #6 and #8 winder arbors for those. Then I made up some brass washers with different inner diameters for when I need a left hand winder instead of right (or vice versa). So far this is working out.
@The_Scienceboy8 ай бұрын
How do the washers help get the other winding (left or right)?
@gpraceman8 ай бұрын
@@The_Scienceboy You know how new mainsprings come in a metal washer? Basically, you are pressing the mainspring into the washer, then flipping the washer over and pressing the mainspring into the barrel. The other way to do this is to push the mainspring into a slightly larger mainspring winder and then pop it into the barrel.
@Grinder-one6 ай бұрын
@@gpraceman Can you confirm the bergeon winders fit into this smaller chinese handle please ?
@gpraceman6 ай бұрын
@@Grinder-one I don't have any Bergeon winders. Just a few of the Bergeon arbors. My guess is that the Bergeon winders will fit.
@Grinder-one6 ай бұрын
@@gpraceman Oh right, I didn't know you could just buy the arbors....thanks.
@alaindrolet_atlt_2019 Жыл бұрын
Hello ! Nice to see your are satisfied. For my part I bought a Chinese set two years ago, the first one I received have some arbor circonference to short for mainspring I try to shorten the center mainspring for help and I broken it. Some arbor hook are different, some too thin some too wide !! Finally I made a complain to the supplier and he sent me a second set for free !! It’s was a little bit better but the problem was the same ! So most of time I do it by hand. Invest your money in a quality set, for sure it’s expensive but you will be satisfy each time you’ll use it !
@DarthSpaceBall8 ай бұрын
Great review, thank you.
@JonSmith-wg8mr Жыл бұрын
Top man, thanks 🙂
@JR-vs4fy Жыл бұрын
GREAT TIP -several winders have the same Outer dimensions-So Loosen the Press-button with Pliers . now Arbers with their eject tabel are interchangeable , bigger, smaller, left ,right winding NOW you can wind a multiple quantety of barrels
@The_Scienceboy8 ай бұрын
You need to do a video 😁
@user-ls8xw2jc7r Жыл бұрын
Hello, thank you for taking the time to show us the mainspring winder set. Any chance you could send a link to the product? thanks
Thanks for showing off these tools. I've been interested in picking up a set but worried I would get ones with the brass hooks. Please post a link to the set you are using here. Thanks!
Many thanks, very useful! Any chance you could give the diameter of which barrels these would fit? Also are these only clockwise winders so wouldn’t work for Seiko for example? Thanks.
@frgner Жыл бұрын
@@boydsargeant7496 Looking at this vid, the pin that hooks the mainspring's hole, is set perpendicularly in the steel rod. That means that it will hold the spring for both directions. This is why the author of the vid has problems unhooking the spring. The unidirectional one have the pin bent or slanted in one direction which makes the un-hooking easier by just turning it in the opposite turning direction and the hole slides over the bent pin. Also with unidirectional winder you can obtain both winding direction by flipping the spring, meaning having the coils toward left or right according to your whishes.
Great review my friend. Could you please share the link?
@davielfingerstyle24572 ай бұрын
Is it possible for all Seiko?
@watchget19722 ай бұрын
Jes it is possible
@pedroleum26 ай бұрын
Hi - Love the video, thanks - What's the diameter of the smallest one
@zinharun70665 ай бұрын
I buy 1set from chines ..same u bro.....i technisen watch
@andyhansen3117 Жыл бұрын
Thanks for the review, I would like to buy one of these. Could you give me the link on where to buy it? Thanks again!
@watchget1972 Жыл бұрын
Here is The linkwww.amazon.de/minifinker-Messingmaterial-professionelles-Uhrwerkfeder-Winder-Set-Uhrenwartungspersonal/dp/B0B63F5DHV/ref=asc_df_B0B63F5DHV/?tag=googshopde-21&linkCode=df0&hvadid=604500375745&hvpos&hvnetw=g&hvrand=13236372577747323369&hvpone&hvptwo&hvqmt&hvdev=m&hvdvcmdl&hvlocint&hvlocphy=9043546&hvtargid=pla-1732323020617&psc=1&th=1&psc=1
@wangbow57553 ай бұрын
One hundred euros? I got the exact same ones of aliexpress for 15 pounds. Same sticker identical
@watchget19723 ай бұрын
Can you sent me the link where do you get buy this for 15 pounds?
@timecorner34218 ай бұрын
How much is cost. Thanks.
@watchget19728 ай бұрын
60€
@zinharun70665 ай бұрын
130 rm
@mintychris1 Жыл бұрын
Can you please advise if the arbor shafts are interchangeable between bodies. Or are the bore diameters a close fit with the arbor for that winder. For example, if I wanted to use the 8200 barrel with a different sized arbor, could I do that?
@watchget1972 Жыл бұрын
Jes,interchangebable between the bodies of the winder
@mintychris1 Жыл бұрын
@@watchget1972 thanks for that. I assumed that the shafts of the winders would be different sizes and would be matched to the holes in the other parts. If any arbor can fit in any barrel, that makes it more flexible.
@watchget1972 Жыл бұрын
Sorry for the wrong information.you cant Change the winders
@mintychris1 Жыл бұрын
@@watchget1972 many thanks. I needed to know before I order these. I reallyvwish that we could find a set of winders like the Bergeon set by size, not caliber. The search continues.
@tommusikauswahl1066 Жыл бұрын
@@watchget1972 Hi, this is a different Set. The one you use in your Video, is the one you recommend under another comment. Do you have own experience with both Sets? Does the one you recommend here (the one with more different winders) also has steele shafts and hooks?
@roccodargenio2939 Жыл бұрын
Hi, thank you for video. Do you know if i can use it for seiko 7009 7002 or 7s26 mainsprings?
@watchget1972 Жыл бұрын
I have Tried on a 7s26 Mainspring.it works
@roccodargenio2939 Жыл бұрын
@@watchget1972 thank you
@roccodargenio2939 Жыл бұрын
@@watchget1972 I bought this set, can you tell me which size did you use for the 7s26? Thank you
@watchget1972 Жыл бұрын
Use the 2235
@theodorkaufman363 Жыл бұрын
Thank you for the video, please send me the link, thanks. Ted
great video thank you, most springs that i have seen in their barrels seam to run the opposite way around.im confused? can you elaborate?
@alexanderkamerbeek9693 Жыл бұрын
Swiss watches wind clockwise and are counter-clockwise in the barrel while japanese watches wind often counter-clockwise with the winders and are clockwise in their barrel. Hopefully this explains it somewhat for you.