I bought a ENOX exhaust for my DERBI SENDA

[@nocconocco69]

Slutade köra moppe för över ett år sedan men kollar fortfarande på kanaler som dina för att få tillbaka minnen från tiderna, nu är det dags för mig att skaffa bilkörkort!

[@CallMeAstro]

Ska du inte skaffa mc?

[@nocconocco69]

@@CallMeAstro ahha alla har inte råd med mc mannen

[@Martonospam]

u should set your air/fuel screw or get one size bigger pilot jet bc your idle goes down very slowly meaning its lean on idle

[@Martonospam]

@@Yalla153 i wrote it down

[@nocconocco69]

@@Yalla153 too much air or too much fuel, play around with the fuel/air screw till it runs good

[@IceMotoSweden]

I tried a smaller main jet and the bike works much better, but my clutch is slipping to much

[@Martonospam]

@@IceMotoSweden i meant pilot jet, not main jet. Pilot jet is for the idle 'circuit' of the carburetor

[@orimkirdud6233]

He have original ignition rotor its too heavy dont worry

[@Thompson_]

Sick dude! your improving level is so fast!

[@theshadowshadow3469]

Nice man, you are improving so fast!

[@Souplmao]

Much better, congrats man❤‍🔥❤‍🔥

[@CarlosRodriguez-ol9fv]

Finally!! Congrats dude

[@t.oik4rinn]

Sick bro ive been waiting for this

[@teun3526]

OMG I AM ON THE VIDEO😂😂 thanks man I love ur vids keep it up

[@IceMotoSweden]

Thanks man😂

[@wes_moto]

Det där är sjukt mannen fortsätt så❤‍🔥

[@melandero]

Better exhaust, mans bought a enox and called it better😭😭😭😭

[@shoruda]

Vad är sjukt? Att han köpte ett nytt rör?

[@wes_moto]

@@shoruda bruh försökte bara vara supportive 🤦

[@rintakarva16]

you need stiffer cluch springs. it slips with stock springs

[@mazzy6227]

😂😂😂 its not slipping u can hear it

[@rintakarva16]

@@mazzy6227 ootko tyhmä vai kuuro vai etkö vaa tiiä miltä se kuullostaa ku kytkin luistaa

[@ksarqu1858]

​@@mazzy6227 it is, you can hear it as he climbs the hill

[@aronflatjord6541]

still waiting for the 70cc kit

[@IceMotoSweden]

😅

[@grbstuntcrew9224]

Sjukt bra fortsätt med det du gör

[@py7re]

I also got enox but i cannot even got the front wheel up in 2nd gear (i have autism)

[@itheprofessional]

YES bro finally 🎉😀

[@kmatekurucz]

Hey man, you should get some protective gear before you spend money on performance parts. At least some motorcycle boots and a spine proctor. I was just like you when i was younger with my senda, i spend my money on tuning parts instead of protectors first, and i broke my leg open. anyways great video, take care!

[@domantaspetronis737]

Did you have to adjust the carburator a lot when you put 92 main jet?

[@charlieellam594]

Du får också dra bort pluggen i föggen om du redan inte har gjort det, även gummi insugs grejen på luftboxen för den stryper också Låter också som din koppling slirar som satan vilket förklarar varför de luktar bränt

[@IceMotoSweden]

Pluggen är borta, men det är något lurigt med kopplingen, när jag släpper på den så fastnar den ibland och då slirar den som fan, men jag vet inte heller om den slirar hela tiden

[@imdovis787]

@@IceMotoSweden yea ur clutch is either slipping or ur gearing too short, clutch might slip cuz of ur clutch cable maybe too tight on the clutch lever u can adjust it

[@RK-yp8zq]

@@IceMotoSweden Rip dina lameller, kan nog va för att du har gjort så mycke wheelies. Kan tänka mig att de sliter en del på kopplingen...

[@IceMotoSweden]

@@RK-yp8zq jag vet, beställde nyss nya

[@RobinBobbin911]

⁠​⁠​⁠​⁠​⁠@@IceMotoSwedenar xtreme 2017. Det går att justera kopplingsvajern om du tar bort gummiskyddet vid kopplingen och skruvar skruven lite. Din verkar vara för tajt, man kan höra det på hur den varvar när du växlar, hade samma problem förut.

[@Angelosp99]

Nice video 💥

[@ville6949]

Sick video

[@Celowrt]

Kung 👑

[@majkutisusernameom]

Might need new clutch plates and springs...

[@Cryst_the_sweat]

i know i am a year late but what did you have so that it went 85kmh and it had short gearing just wondering becouse my stock drac only goes 55kmh with stock gearing and emptied stock exhaust

[@DKsBedsteRapper]

my almost stock drac does 90. I only got 70cc and carb, everything else is stock

[@cuvh6170]

​@@DKsBedsteRapperallmost stock😂

[@Derbi_50mhr]

My 50cc does 115

[@cuvh6170]

@@Derbi_50mhr glädje mätare

[@rosh4005]

Insane as usual🤯🔥Are you pulling up in 4th gear??

[@IceMotoSweden]

5th

[@SupermotoStars]

@@IceMotoSweden what🤯 that’s insane

[@Mostromstunt]

@@IceMotoSweden du borde nästan kunna på 6an också för min dt går typ lika lätt på 5an som på 6an 🤠

[@felixkunz5458]

where did you mount the exhuast springs? on the cylinder? because I have the same derbi and it mounts with bolts.

[@Bajabojan3]

Behövde du ändra något med motorn eller något när du köpte nya röret för ja funderar på att köpa ett enox evo 2 till min drac vad ska jag ändra i själva munstycken elle nåt

[@IceMotoSweden]

Bara munstycke

[@Bajabojan3]

@@IceMotoSwedenhur stort tror du

[@IceMotoSweden]

@@Bajabojan3 beror helt på

[@mercedes_w211]

hi, did you gain much power?

[@magwol]

Gööött!

[@lucasjohansson3205]

Har du testat köra topphastighet med en gps-mätare på mobilen för att det kan vara att din mätare ljuger?

[@sky-xt8xn]

Vilka växlar kan du stegra på och hur tar man bort pluggen i föggen?

[@IceMotoSweden]

Alla växlar

[@carlnilsson3253]

hur fick du på röret? du hade fjädrar på ditt men det passar inteatt ha några fjädrar på min, dåd en är en exagt likadan modell

[@liampihl5546]

Sjukt bra kontroll på bromsen

[@bentkuppens]

you should get a gianelli conti 10x better en better sound and a good price the performance is one of the best you can get

[@jakobheugl3968]

Is the Enox a good exhaust for 70ccm Airsal Sport?

[@IceMotoSweden]

Yes

[@naikouzzz8417]

Not for power but for wheelies a non ported airsal and enox are porpably great

[@ille.1478]

Om man byter till ostrypt cdi, ostrypt krök och annat drev. Behöver man byta munstycke då?

[@IceMotoSweden]

Ja, men bara om du byter till Ostrypt krök

[@Zajsgarage]

tror inte det. min gick bra utan att byta munstycke

[@ille.1478]

@@Zajsgarage tack så mycket 💯

[@IceMotoSweden]

@@Zajsgarage det kanske går bra, men den kommer gå bättre om du byter till större och det finns inte en lika stort risk att den skär

[@LeNgocXx]

where did you buy the enox?

[@vilhelmdjurstrom4915]

Hur fäste du röret vid cylinder? Org röret har ju skruvar men Enox röret har fjädrar.

[@IceMotoSweden]

Enox har fjädrar och skruvar

[@LarsFolkevWv-ki8xn]

How to you keep your exaust so clean and stop it from rost?

[@ConwayPenn-uy1nc]

Where did you buy it from, I’m struggling to find one for my bike it’s a similar model

[@IceMotoSweden]

Twostroke.se

[@ConwayPenn-uy1nc]

@@IceMotoSweden hi do you by any chance know an English website

[@rosh4005]

Do you think the enox is worth it? Why did you pick the enox instead of leovince x fight, yasuni, stage6..etc?

[@IceMotoSweden]

Its cheaper

[@rosh4005]

@@IceMotoSweden Ok thanks!

[@kullijuusto]

Stock shit pipe for stock shit bike 🤣

[@Szymonsendziarz]

leovince is total shit, thats all i got to say

[@benh5905]

Är pluggen svetsad fast i röret eller är den lös, alltså enox röret då.

[@IceMotoSweden]

Den är fast svetsad

[@benh5905]

så du borra bort den? @@IceMotoSweden

[@IceMotoSweden]

@@benh5905 hamrade med skruvmejsel

[@Daviiddd35]

what size sproket are you on?

[@ConwayPenn-uy1nc]

I’ve got a similar bike and I want to get the exhaust for mine, where did you get yours from.

[@melvinmaikisch5906]

twostroke

[@axelkarlsson3372]

Hi I love the videos but where did you buy the enox?

[@IceMotoSweden]

Twostroke.se

[@axelkarlsson3372]

Thx

[@axelkarlsson3372]

Is it enox evo or just enox that you have?

[@bigpadre362]

Vad har du för bakspegel har letat efter en men hittar ingen som passar

[@ojken7066]

biltema

[@korpi1337]

Hur snabbt går den på gps? Funderar på att fixa större munstycke

[@IceMotoSweden]

Gick faktiskt ner i munstycke och den gick mycket bättre

[@korpi1337]

@@IceMotoSweden Fan har 82 munstycke samma setup men toppsr ba 77

[@gregor_felgitscher63]

could you maybe do a tutorial to change your stock cdi to the unrestricted cdi, please ??

[@IceMotoSweden]

It’s not so hard, you just put it on like the original is on

[@teun3526]

Finally 😂

[@jessekuipers05]

you need to replace the clutch. it is slipping

[@IceMotoSweden]

Yes I know

[@matti1326]

did you take the restrictors off from the exhaust

[@IceMotoSweden]

Yes

[@fits0n173]

how do i take if off?

[@l81x16]

originally there is still restrictions in the enox exhaust

[@IceMotoSweden]

Yes

[@fits0n173]

how do i take it off?

[@barnabasegyed5595]

Did you remove the restrictions in the enox?

[@IceMotoSweden]

ofcourse

[@felixdimartino1257]

@@IceMotoSwedenkan du visa när du plugga ur röret

[@ATPStudios2137]

jestem fanem uwu

[@PointOn3]

Äre värt o köpa till en aprilia sx50 om man också skaffar raiser och 14/65

[@IceMotoSweden]

Ja

[@joaomiguel3866]

14-65 on the transmission, thats why your motorcycle doesn't go faster. with my am6 i use 12-53 but probably going back to 11-48 due to hit the rev ceiling too soon

[@juleslootens]

Is technigas Enox a good exhaust for a 50cc?

[@IceMotoSweden]

Yeah

[@Hogex9]

how much does ur bike weight?

[@hundreyek2056]

front bulb ?

[@florianraszipovits2280]

put more oil in it i think because mine did blow up because the normal oil volume i put in was not enough

[@realtopsa7847]

How big is the engine? (cc)

[@HSMmopedcrew]

Du skulle köpt gamla enoxet me den mindre ljuddämparen för då kan du köpa en blå ljuddämpare eller så skulle du ett annat rör så får du mer effekt

[@neostromgren401]

Om du inte gjort de än så kan du kolla om det sitter en luftstrypning i förgasaren. Så när du ändrat munstycke o tagit bort den så är de stor skillnad de va de för mig

[@IceMotoSweden]

Gjorde det👍

[@ServeraServera0]

If you wanted more peak power you could have gotten one of these exhausts that goes under the bike Only downside is that they give the power on really high revs

[@777Jere]

you can easily get the same powerband with high mount as low mount exhaust

[@UNKNOWN_MOTO.]

A underbody would be too big for a stock moped

[@AuroraMeru]

@@UNKNOWN_MOTO. No it wouldnt if you choose the right one

[@AuroraMeru]

⁠@@UNKNOWN_MOTO. same as high mounted exhaust

[@UNKNOWN_MOTO.]

@@AuroraMeru a 70cc underbody could work but for a stock moped it could be too much

[@simonl9598]

Vad har du för glödlampa fram?

[@JaskaPerkele]

Did you remove the restrictor?

[@IceMotoSweden]

Yes

[@fits0n173]

but how do i take it off?

[@JaskaPerkele]

@@fits0n173 you need to drill it and then take it off with pliers

[@danielvetro7256]

A doppler vortex 50 cylinder could be the next upgrade!

[@kullijuusto]

💀💀 Why not 88br and an actual exhaust not enox

[@T1L3M4]

Please paste a link bevause i want to buy and paste the cheapest site from where you cam buy!

[@tipzyxd2823]

Varför inte leo vinci istället?

[@919kimi]

If you still have stock carburetor maybe get a 17.5mm?

[@nick-nc7ee]

Derbi has 17.5 stock

[@919kimi]

​@@nick-nc7ee me and my friends all had 14

[@nick-nc7ee]

@@919kimi ohw weird, all d50b0 (engines from 2006 and up) has 17.5mm stock.

[@papipiibuilds6788]

​@@nick-nc7ee 2004 and models before have 14,5mm

[@domenzaloznik848]

My stock yamaha dt50 does about 80kmh with stock echaust. Could i reach higher speeds if i just buy an enox exhaust? And how much kmh could i reach with it? Any cheaper alternatives to enox or will just enox help me reach higher speeds? Thanks for any information

[@mercedes_w211]

i have yamaha dt50 too, and i have 80cc with stock exhaust, but mine even doesnt reach 80 kmh, it goes max 75 with 11-53 i think, so now i will get 15-53, i suggest you too because exhaust will give you more power, not speed

[@whats230]

i also bought an enox exhaust and it didnt really give me a higher top speed but it did give me a lot more power so i could reach top speed faster. hope this helps you!

[@delallish123]

@@mercedes_w211the stock exhaust restricts your power and rpm very much, thats why its so slow

[@ooheureka]

vart har dvt stjern köpt sitt sadelöverdrag?

[@msclstarme1948]

Stjern har köpt Sadelöverdraget på bold ”onegripper” ;)

[@Bajabojan3]

Du sa att innan toppa den 70 kmh stock hur?

[@IceMotoSweden]

Ostrypt cdi

[@deitosity]

can someone tell me, i dont understand why he ran and went on the bike path, does he like not have a license or what

[@IceMotoSweden]

I had no license plate on the bike

[@deitosity]

@@IceMotoSweden why lol?

[@theshadowshadow3469]

What is your rear sprocket?

[@IceMotoSweden]

65

[@aski1529]

you should remove the rerstrictor to get more power and powerband

[@IceMotoSweden]

I did

[@legacyalone343]

Where did u buy the exhaust?

[@IceMotoSweden]

Twostroke.se

[@tortuga5264]

Sjukt snygg moppe! Tycker dock du borde sätta på crossplatta och ledramp istället🤟

[@IceMotoSweden]

Satte på en nyss

[@niklasneumann-f7d]

which year is that bike ?

[@jontyo3198]

2017

[@jaki1126]

Will it fit on my yamaha dt 50 rsm?

[@IceMotoSweden]

Probably

[@Wutman]

Var det lätt o montera?

[@IceMotoSweden]

Ja

[@emilhallberg239]

Va har du för Setup?

[@emilmarce6073]

är enox röret pluggat?

[@IceMotoSweden]

Nej.

[@fits0n173]

guys how do i take off the restrictors from enox?

[@todensarg]

Drill a hole into the restrictor and tear it out with a screwdriver. Thats what i did

[@PedroPimentel-gf6td]

Post a video os your crashes

[@hepis9563]

is this 50cc or 70cc?

[@IceMotoSweden]

50cc

[@eriklook2189]

äntligen

[@Zajsgarage]

I have a 50cc derbi senda drd xtreme 2016 with 13 52 gearing and enox. I topped 90 - 92 km/h den värme nöp efter 1 timme

[@IceMotoSweden]

Vilket munstycke hade du?

[@sanderooyt1135]

Kan någon länka avgasröret han hade

[@lorac4460]

Can i buy the old silencer

[@IceMotoSweden]

how much

[@lorac4460]

​@@IceMotoSweden how much do you want for it

[@hdankan1697]

kör du utan plåt nu ?

[@IceMotoSweden]

Givetvis

[@aidshasse]

Blir det lätt mc för dig?

[@IceMotoSweden]

Jepp

[@aidshasse]

i år?

[@IceMotoSweden]

@@aidshasse nästa säsong

[@Adam-oj8hj]

Hahha vilka kungliga poliser

[@lauritervonen6507]

get a lot bigger main jet, and tune it before it feeels good

[@IceMotoSweden]

I don’t need bigger main jet, but I do need a new clutch

[@erikbond3541]

hello i have a 70cc bike that goes 110 not so good acs

[@erikbond3541]

is it hard to wheelie with it?

[@IceMotoSweden]

@@erikbond3541 not really, but you can get a lighter gearing maby

[@vituhelarimukula]

with stock excaust is easyer to wheelie

[@Bananek3496]

Fix Ur clutch MEN or is it cvt or some shi

[@teun3526]

I feel kinda guilty for commenting that much and making you buy a new exhaust but I hope it’s worth it

[@IceMotoSweden]

It was worth it!

[@teun3526]

@@IceMotoSweden nice 👌 enjoy it

[@linus7231]

70cc next?

[@IceMotoSweden]

Maby Maby

[@yes-wl2yn]

70 kubbe snart?

[@tobiastorgersen7614]

I got the same on my beta rr track 2018

[@Filip-bk9it]

NEW TURN SIGNALS PLEASE

[@IceMotoSweden]

I dont need Them