Get some Tru Fuel ethanol free fuel for storing it since you don't know how long until the next time you need it. The Tru Fuel will last over 1 year and prevent the tiny ports and jets from gunking up. Just drain the fuel you have in it put in some Tru fuel and run it a bit till you smell it then put it away. And I guarantee it will start when you need it next time
@just_inolredneck83193 жыл бұрын
They make bar and chain oil.. and it works better than oil.. just a preference and experience.. I’m interested in seeing this saw work… I’m a Stihl guy myself.. but looks like it works so far! And always use ethanol free gas.. ours sits all spring summer till fall and winter.. we heat with wood! So the key to keeping them in good running order is the gas.. and keeping the chain sharp, and the oiler clean so it don’t heat the bar! Definitely impressed for the price
@ExocagedRC3 жыл бұрын
Yeah I was surprised to see it say just regular 10-30 bar oil.
@causetheplumstasteyum78482 жыл бұрын
If you want to be really cheap for home logging or basic needs , Vedge oil will also do the job :)
@rccrawlersmid-wales6453 жыл бұрын
Great job! I enjoy watching you build and develop the exoplex as well as the trucks, so thanks and keep it up! 😎👍
@ExocagedRC3 жыл бұрын
Thanks!
@MechAnism8203 жыл бұрын
Make sure to drain the gas from it before storing it, and run it till the carb is empty of fuel. The alcohol used in many fuels will attract water and corrode the carburetor and cause the diaphragm in the carb to become stiff and stop working.
@ExocagedRC3 жыл бұрын
Good tips. Thanks!
@RyanRKJ3 жыл бұрын
Thanks for saving me from typing out that important message.
@old-rcplane-phart3 жыл бұрын
Especially nowadays with all the 10%+ (m)ethanol alcohol in our gas. & Yet they STILL charge us the same as if it was PURE gas! 😠
@ryano86133 жыл бұрын
Add MARVEL MYSTERY OIL!!
@treygriffin11763 жыл бұрын
I think you should convert it to electric. Castle🤔
@iaqmaster3 жыл бұрын
Nice drop!
@94SexyStang2 жыл бұрын
actually it was TERRIBLE and UNSAFE......you obviously know nothing.
@bassanonymous49233 жыл бұрын
That first fire up of the Chainsaw reminded me of the first time I tried to crank my 5th scale not understanding how the safety kill worked. After about 45 minutes of yanking I broke the pull cord and turns out the kill switch was not functioning proper after fixing that issue it fired up on the third pull😁😁
@ExocagedRC3 жыл бұрын
😂😂 I went through that too LoL
@RCnurse3 жыл бұрын
I actually laughed out loud watching this! Definitely enjoyed it!
@modzilla743 жыл бұрын
Reminds me of the old nitro days.. lol frustrating... At least the pull start rope didn't break ..lol comedy
@notlrachtron3 жыл бұрын
Envy you having so much land …but your weeding is on a massive scale by using a chain saw and a tractor !!, in the uk anything bigger than a pair of sheers is the next level 🤦♂️
@whistlinlipo3 жыл бұрын
May as well be a STIHL! haha
@CdS2DpWeLZdoZ3 жыл бұрын
Are you using this with one hand as your rc controller ? 😂😁
@ExocagedRC3 жыл бұрын
LOL heck no!!
@1970scout8003 жыл бұрын
I only buy Stihl chainsaws..good luck!
@WreckitRalphie3 жыл бұрын
@exocagedrc I wish I were closer to u I'd come and fell whatever trees u point at.
@rc-daily3 жыл бұрын
Those saws aren't to terrible. If you want it to cut a little better take a file or dremel and knock the tops off of the guide teeth.
@ExocagedRC3 жыл бұрын
Well it was doing good for me.
@rc-daily3 жыл бұрын
@@ExocagedRC after you sharpen it a few times the teeth will get shorter and those guide teeth will have to be knocked down a little bit. You'll go from removing Chips of wood down to saw dust
@redvikinghobbies3 жыл бұрын
Ya know, and I thought you would've done this one handed too...
@ExocagedRC3 жыл бұрын
Luckily I’m not one handed for real! 😂😂
@redvikinghobbies3 жыл бұрын
@@ExocagedRC Lol!
@daniellang61122 жыл бұрын
fun video! BUT... shorts and those shoes? no gloves?
@NCMOUNTAINSbackyardRC3 жыл бұрын
That was so fun. I thought the review was over halfway through. Killer deal I store my chainsaws. And weedeater. With ethanol free. Gas. Mixed I just learned this a few years ago. Ethanol. Draws moisture over time.
@whitsrcleftovers27073 жыл бұрын
Got some vitavon on order for it... haha. This was a fun video.
@JustCallMePCra3 жыл бұрын
Anything with a gas engine or electric motor you put in this channel is fine by me! I love POWER!
@roypennock80463 жыл бұрын
You need to install the logger mod now!🤣🤣👍
@GuyonaMoose3 жыл бұрын
Maaaan think of the power you’d get from a castle 8s 800kv system rigged up to the bar
@ExocagedRC3 жыл бұрын
I almost bought an electric one but for this job I’m happy with the one I got.
@RunninOnCoal2 жыл бұрын
The jean shorts were your problem for why it wouldn't start. Trust me, I'm not a chainsaw expert, but I have some nice saws, and a good bit of experience. Even that Chinese knockoff didn't want to be on video in that situation lol. You made a couple of fundamental mistakes (for instance, the notch on the first tree was way to deep, and you never want an angled back cut under any circumstances), but I appreciate your attitude and approach. You got it done. If you endeavor to cut more trees, I'd recommend the book "To fell a tree" by Jeff Jepson. Inside is everything I know about the subject. It's a great book, and was well worth the read for me. Good job!
@brandonfarner29503 жыл бұрын
That’s why you should have just bought a Stihl
@ExocagedRC3 жыл бұрын
No need to spend that much
@causetheplumstasteyum78482 жыл бұрын
Stihl are decent but really overpriced , you can get a husqvarne 236 for a couple of hundread bucks or a decent echo and still get quality
@joeygodoy5093 жыл бұрын
Cheapest chain saw dont want to start haha
@stephenr64273 жыл бұрын
I think if you don't know how to assemble it you should at least get someone to show you how to use it before you chop a leg off and your meant to use 2 stroke oil
@ExocagedRC3 жыл бұрын
UHHH yeah it had the right oil in the gas mix.
@glennjthompson3323 жыл бұрын
(Hockey Mask) not included,Nice chainsaw, always in good profection in Yard Work.
@robertdahl72913 жыл бұрын
You should use bar and chain oil motor oil don't have the tacky compound to stick to the chain
@causetheplumstasteyum78482 жыл бұрын
The thinner chain oils work better than the thicker ones this is true , if you want to be really cheap and are on a budget for loggging , you can also use Vedge oil and it will do the job :)
@jdsrcs80613 жыл бұрын
Poor Ever Brown!!!! Not to bad for a knock off chain saw. 👍👍👍
@ExocagedRC3 жыл бұрын
Yeah it’s still alive.
@mikej88323 жыл бұрын
Bonfire??? Need video if so...
@jonthomas84873 жыл бұрын
It’s pretty straight. You could make a bridge or ramp on the course
@ExocagedRC3 жыл бұрын
Yeah but that untreated pine rots away so fast.
@teamsargentrc63993 жыл бұрын
🤦🏼🤪😂😂😂😂... Definitely rc related! Building scale log obstacles.
@ExocagedRC3 жыл бұрын
that was a quick comment!!
@bassanonymous49233 жыл бұрын
Definitely reminds me of a few Nitros I've owned in the past🤣🤣
@teamsargentrc63993 жыл бұрын
@@ExocagedRC 🤜🤛👍
@SteadfastRC3 жыл бұрын
You don't chop with a chainsaw homie you cut. lol
@ExocagedRC3 жыл бұрын
LoL I like to chop stuff
@evanedens64063 жыл бұрын
Make more episodes on the DANCHEE RidgeRock
@ExocagedRC3 жыл бұрын
Its right here beside me ready for motors, esc and a new radio.
@carlmartin25213 жыл бұрын
If you close your eyes and think about it. The 2x speed sounds like a 5th scale gas car or even a nitro lol and when are you swapping the castle 800kv and mamba monster x into the chain saw🤣
@ExocagedRC3 жыл бұрын
lol I'd like to try one of these motors in an RC
@carlmartin25213 жыл бұрын
@@ExocagedRC I would definitely enjoy that lol
@CindyCThys3 жыл бұрын
Can't relieve you wouldn't spend a few more dollars to get a quality chain saw. That THING is a joke
@ExocagedRC3 жыл бұрын
It got the job done just fine
@causetheplumstasteyum78482 жыл бұрын
I've had a saw exactly like this and its still going strong after nearly 5 years or logging and home usage , you get what you pay for sure , these won't last forever but for the price tag they more than pay for themselves
@georgedavall94492 жыл бұрын
This was a very interesting, and entertaining video, and you are a very amicable dude! I am not usually a fan of the use of Fast FWD’g, but the part where you were trying to start it, was hilarious! Having said that, I was relieved to see you finally got it started, and your choice in doing so on the ground! I will often fire up a saw, with the ‘between the legs’ position, but NEVER drop starting it like you first did. That way has a natural tendency to ‘swing’ the saw around, and actually can lead to injuries of the lower body, should the saw fire up, while in motion! Yeah, I know, a lot of guys do it, but it doesn’t make it any safer. And drop starting a spring assist saw will damage it. Nice tractor, and that part of saying you were gonna fall it on your tractor, funny. But please use some basic PPE, because @ 10:34, you stumbled, and these are the many situations that lead to injuries. I’ve been a knucklehead myself, and taken chances in years past, but no more. Please promote safe sawing! Enjoyed your video, and big thumbs up otherwise. Thanks for considering my well intended comments. 👍✌😊
@ExocagedRC2 жыл бұрын
Thanks man. Yeah I shoulda been at least wearing shoes! I should do a follow up as it ran great a while back when I needed it again. For me a great $110 spent. I think that’s how much it was.
@cyrilrcracing3 жыл бұрын
evil dead 2
@1984IT2003 жыл бұрын
Special notes needed....first you had the kill switch off...needed to be up.....second you didn't have the throttle lock on at half throttle
@ExocagedRC3 жыл бұрын
was that the issue? Its been a long time since I messed with a chainsaw of any kind
@1984IT2003 жыл бұрын
@@ExocagedRC yessir that was definitely the issue....choke pulled out with the trigger lock on and kill switch toggle up to be in the run position....now you might not need choke in Florida as it all depends on air temp mainly....here in eastern Canada a saw will not Start without that procedure.....not sure if it has 2 choke positions or just 1 but it you pull and it starts then stalls set the choke to half then pull again
@wildmangeorgesrcchannel69163 жыл бұрын
I look forward to all the upgrades your gonna get for it over the next few episodes. Does treal or vitavon make anything for it yet?
@ExocagedRC3 жыл бұрын
LoL if there are mods I’ll do it!! 😀😀
@The_Privateer3 жыл бұрын
Mount it onto the X-MAXX - RC chainsaw-ing!
@ExocagedRC3 жыл бұрын
I would like to figure out a way to make a snowmobile out of it. That would be awesome.
@Chon-c3 жыл бұрын
JOE ? You should have cut that into 17 foot lengths or something and sold it !! That tree had a lot of good lumber in it. If it would have been me ? I would have took it to a band mil and kept the lumber. Because you will use it. I can’t believe you cut that into short pieces. 🤦♂️ lol. You can rent a stump eater to get rid of that just below ground level and then cover it up. Or just dig it out. But you will find that won’t be easy as you might think . Lol Even with your lil tractor. You’ll be all day and maybe then some. So a stump eater is a better option than you might think. A couple of hours total after cutting it to ground level. Also btw ? Along with heavy equipment operating for 27 yrs . I also cut and sold timber off of our road jobs. My biggest tree I cut was 8 foot through the middle & had 1000 board feet in 1 ,8 foot cut. A big red oak . And that tree you cut up was probably worth a few hundred dollars. At least.
@Houleigan3 жыл бұрын
I bought an electric chainsaw from Princess Auto (Like Harbor Freight) for $50 CDN. Best chainsaw I have ever owned! So do not knock some of the cheap stuff!
@Scale-Crawler-tamiya-Xray-RC3 жыл бұрын
nice job
@ExocagedRC3 жыл бұрын
Thanks!
@joeygodoy5093 жыл бұрын
Love how you set the chain saw on the shelf like a crawler haha
@ExocagedRC3 жыл бұрын
LoL
@joe-mac3 жыл бұрын
Now it's time to put that motor in the megaryft lmao 🤣, great video man. That actually works great eh.
@christopherhoffman25602 жыл бұрын
These carbs have an low end and high end the low end is probably lean and needs to be opened a little
@mauriceprudhomme52963 жыл бұрын
That sped up starting was a hoot! Been there. Maybe a few drop of gas in the cyl would help if there’s no primer. Or plug the exhaust when u pull
@Wannaridebikes3 жыл бұрын
You can make some nice wooden features for crawling with it like tree features easier to make wooden bridge or curve out tree for a tunnel. Just limitless ideas for it.
@ExocagedRC3 жыл бұрын
The untreated pine rots away so fast.
@Wannaridebikes3 жыл бұрын
@Exocaged RC right and yes if you can treat it it will be like a old country cabin build for scale crawling. Just stating to be like making a bridge type could be used. Just ideas to use it ..
@old-rcplane-phart3 жыл бұрын
Too, u can use the wood logs as jump fillers for any/all of the jumps u put down.
@frankmoynagh7423 Жыл бұрын
Don't buy overpriced badly over enginered stihl . husqvarna for long life and reliability or if for occasional garden use a mculloch made by husqvarna cs 35 cc saw will suffice .
@ExocagedRC Жыл бұрын
MAn I've had AWESOME luck with this one. I've got my moneys worth a few times
@misteryz573 Жыл бұрын
Uses a 50:1 mixture of Gasoline /oil
@lornefrancis92313 жыл бұрын
I have one of those friend gave it to me it works fine for what it us had to adjust needles worked great
@alantaylor3533 жыл бұрын
But.. But.. But I was literally just shopping on Amazon for a cheap chainsaw before bed last night.!! I thought it might have been some advertising analytics thing, but then I saw the date & it's just a coincidence... Unless... Are you reading my mind again.? Stay safe out there mate & best wishes from Scotland.!
@ExocagedRC3 жыл бұрын
LoL hey man. I needed something cheap and so far I’m happy with this one.
@JPM7882123 жыл бұрын
Like most of all 2 cycle lawn equipment, you need to hold the throttle wide open with choke closed on cold starts. Once your hear it fire, then move choke to half and then full open, but always with throttle at full throttle while attempting to start it.
@georgecanard26679 ай бұрын
I have been logging for over 30 years and have never heard of this ! I will try it just for the halibut. Usually you start with full choke till it fires. (powersaws/ chainsaws) But some weedwackers have some strange starting procedures
@jano76422 жыл бұрын
1:25 oil is wrong! It is bad for the saw. It will make carbon deposits in the cylinder. Use 1:40 or 1:50 for good quality oil.
@misteryz573 Жыл бұрын
Chinese chainsaw FIVEA bought in 2006-2007 year paid 240 BAM = about 120 euros. It's still working. I've used and used a 50:1 mix. Gasoline 95 octane. 2t oil stihl and now husqvarna 2t HP. Of the failures I only had a starter ignition plastic part. Second time steel wire in the ignition starters. And as for the operation or ignition of the saw 2-3 pulls and the saw falls. 3 years lay in the basement 5 times pulled and chainsaw fired. And before that, she lay there for two years with a full tank of gasoline. I shake it, mix the mixture into a thin and draw 5-6 times and The chainsaw is on fire. Yoooo 😁 😁 👍 Greetings from Bosnia 🇧🇦 Google Translate
@davidtrevino57693 жыл бұрын
Where are your chaps?
@ExocagedRC3 жыл бұрын
LoL what’s a chap?
@davidtrevino57693 жыл бұрын
@@ExocagedRC chaps are protective leather pants Incase of a chainsaw accident.
@prestonsrc3 жыл бұрын
That was entertaining for sure! 👍🏼
@rcmaniac985963 жыл бұрын
Any video that has you in it, we will watch! Great content by the way
@chadlunsford67303 жыл бұрын
I'm excited to see the racetrack.
@bobt2193 жыл бұрын
Reminds me of the time I was trying to start a brand new 20cc gas motor for an RC airplane. I could see through the clear fuel tube that it was not pulling any fuel to the cab. I took the carb apart and found the rubber diaphram (the rubber fuel pump thingy) in the carp was stuck. I gently pulled it loose, and reassembled. It started almost immediately. I wonder if that's what was wrong with yours.
@ExocagedRC3 жыл бұрын
Don't know, it starts great now
@danwoodruff43233 жыл бұрын
Just in time for Halloween 🎃
@SwampersRC3 жыл бұрын
Great review Joe! You really ran the piss out of that thing. Alot of the Chinese stuff is really good and you can't beat the price!
@ExocagedRC3 жыл бұрын
I’m happy with it
@jonthomas84873 жыл бұрын
If the rest of the saw breaks but the engine runs you could build a chainsaw powered RC boat. I think the outputs on the engines are good for boat applications
@ExocagedRC3 жыл бұрын
Oh for sure. I’d like to put one of these motors in a car.
@markvasseur9613 жыл бұрын
Holy crap Joe, think I would have had a coronary or stroked out before I got that one started
@ExocagedRC3 жыл бұрын
It was a pita on that first start.
@ashleyconnelley5563 жыл бұрын
Nice job my man
@ashleyconnelley5563 жыл бұрын
Yes sir
@CM-ig2pf3 жыл бұрын
I would have thought you would have gotten an electric chainsaw! Lipo power! Also could have stolen the motor for a project! Easier to start also😂👍 good job though
@ExocagedRC3 жыл бұрын
I almost did but this was a big tree
@CM-ig2pf3 жыл бұрын
👍😁 ya it’s kinda big for electric
@WillB.67593 жыл бұрын
Kinda like a rovan 5th scale review vroom vroom lol.
@ExocagedRC3 жыл бұрын
Yeah I bet this 52cc would run one good!
@everythingoff-road66373 жыл бұрын
Love the daily videos no matter what they are. Gotta say I really want to see a trx4 with a lift kit and the ottsix sticky’s or the proline mambas. I’ve got the mambas the sticky’s are on the way and I gotta put the lift kit on still
@ExocagedRC3 жыл бұрын
That would be too tall and floppy. It would just fall over.
@everythingoff-road66373 жыл бұрын
I’m still going to give it a try I know it’s gonna be tall but if I don’t like the lift I’m gonna swap it back to stock and just get some ottsix 1.9s
@Slaters_RC3 жыл бұрын
I had a lifted trx4 and about the only thing it was good for was mud. Thing would just tip over looking at a hill or rocks. You can make it work with a lot of tuning but it’s best as a mud truck with the lift.
@mikebird82903 жыл бұрын
HI JOE EVEN THOUGH THIS WASN'T REALLY RC. I ENJOYED WATCHING THE VIDEO. THANKS FOR POSTING SIR AND HAVE A GREAT WEEKEND.🇬🇧🇺🇸🕊️👍
@mikep.93383 жыл бұрын
Was wondering for a second lmao
@ExocagedRC3 жыл бұрын
LoL
@old-rcplane-phart3 жыл бұрын
Y not buy an electric chainsaw? Personally, i know id end up swapping the junky battery over to a rc pack, so i can fast charge it in minutes, not hours! 😁
@CindyCThys3 жыл бұрын
Good drop, but that chainsaw is embarrassing for you