I bought an old Ford Tractor! Let's cold start it and plow some snow! - Vice Grip Garage EP58

I needed a hand around the shop. So naturally, I just bought a tractor instead of paying someone to help. I found a really cool old ford 9n south of town and had to have it. It's got a full hydraulic loader, working 3 point with a blade, and she even has high low! It was left in a tree row, and we fought pretty well to get it home. Let's see if it will start, and put it work plowing some snow!
To show your support:
Have you checked out memberships? Great additional content and behind the scenes!
/ vicegripgarage
find merchandise here:
www.vicegripga...
For daily stuff, follow here:
/ vicegripgarage
/ vicegripgarage
email [e-mail]
SEND ME JUNK:
PO BOX 2088
Lewisburg, TN
37091
#vgg

[@tvoyds7035]

"I'm glad I did that visual inspection" lol It says storage, winter blend" Lot easier than running that snowblower" " Got the delay pop on the hood!" "That's The problem it says Ford on it" lmfao! You are the best KZbinr!

[@ViceGripGarage]

Thank you bud, appreciate you watching

[@Bobcat-xt7uy]

I have been looking for a Ford tractor. Please keep your videos on your repairs coming. Thanks Bobcat 2313

[@matthewbakker8113]

I thought a front loader tractor was an unnecessary luxury until I borrowed my buddies... hope he never needs it back... no going without one again if I can...

[@pv2xeek]

Hey thanks. Don't even need to watch the video now. Got all the ol' one-liners right here in the comments.

[@donaldleavy4379]

T VOYDS Well A Fella Like Me Is In The Same Wheel House As A Fella Like U.. Sooooo... It’ll Be Fine.. just fine

[@chrisadams628]

I'd definitely like to see more of this.

[@07cowboy07]

I second this.

[@dukeman7595]

@@07cowboy07 Me too

[@redneckmexican]

Yes sir lots of this!

[@ViceGripGarage]

🤘🤘

[@grosseileracingteam]

@@ViceGripGarage This Ford tractor video is why I subbed to your channel. I've even watched some of your chevy videos just for laughs. What do Ford and chevy owners have in common? They both want to own Fords.

[@nickhattler8236]

I, too, have stopped midway through a self inflicted disaster to remind myself that "this is fun".

[@TheCanadianBubba]

A fella should make a vidya or two of his ol'sweetie... betja she'd get some likes !

[@andrewkiwi1]

The tyre chains are good. They are holding the tyres together. its a lovely old tractor. LOL

[@aaronhayden1780]

Tire

[@andrewkiwi1]

@@aaronhayden1780 In New Zealand we use the English spelling tyre. Eye kann Spell LOL

[@sykwookiee]

@@andrewkiwi1 Aaron's either 12 or one of those assholes that think that American English is the only version that is correct...I've got a vocabulary that would choke a PhD, but I feel that close enough is good enough for KZbin comments....that, and I feel that people who correct the spelling or grammar of others are the same people that hold in their farts...it just builds up to the point where the fumes are causing brain damage...welcome my friend, I don't care how you write things, most people can usually figure out what you mean, but if I can't, I'll ask...ok? 🤘😎🤘

[@edwardmulder3777]

@@andrewkiwi1 good on ya mate, heheh.

[@thecelticprince4949]

@@andrewkiwi1 They're yanks cuz. Gotta forgive em for not being literate in rill inglush ay !? On ya bike Noddy.

[@vilstef6988]

The eccentric way he speaks of himself in the third-person puts a smile on my face.

[@jrgaston8891]

1950 it'll be an 8n. The 9n came first, then the 2n then the 8n. Go figure. I got a 8n in the back yard I'm working on, sure do love them.

[@alexsaxton6187]

Agreed

[@MrJeep75]

This is a 9n or 2n it has the big bolt pattern on wheels

[@metriccrescentwrench1665]

I’m a life long mechanic and tinkerer also. 3 weeks after my wedding 22+ years ago I was changing a batree in a Deere tractor and pulled that same 1/2 wrench out of my pocket and temporarily induction welded it between my new wedding ring, the wrench, positive post, and the batree box. Still have a free scar tattoo on that ring finger today so don’t even need to wear a rubber one like all u guys. Keep up the great old school content, love it VGG!I

[@nolanm7343]

I had slag from a mig welder hit my tungsten ring. I wear the same scar! I now wear the silicone rings .

[@Beandiptheredneck]

That seems like a pretty solid old tractor. My dad does all his snow clearing with a 60s vintage Massey Ferguson 35, it’s got a 6’ blade mounted on the front and a 6’ blower on the back. I love old tractors

[@ThatDumbSchmuck]

I've got a Massey 35, awesome tractor! check it out: kzbin.info/www/bejne/iKLTq42Jn7ZladE

[@davids.9834]

I grew up on old tractors. I just purchased my first new tractor........ a Kubota. WOW..... is all I can say. It is so much safer and easier to run, not to mention the hydro is tits for plowing and bucket work.

[@amber110526]

I learned to drive on an old Massey Ferguson 35 in 1960. God I am old

[@peetduplessis7401]

135 Ferguson with 3 cyl Perkins, best small tractor ever made, i kid you not

[@claylueckemeyer6591]

Really enjoy the old tractor videos! I’m in the middle of resurrecting a 1952 Ford 8N that sat under a cedar tree for 15 years! Look forward to seeing more on the old Ford,

[@vulcan1429]

City folk like me born and raised love love videos like these made by guys like you. Growing up we joke about you but actually we are jealous. God Bless and keep showing us your daily life.

[@chrisbishop7253]

Your dry humour is king!!! That's the key to all this! And i love it! You apparently learned a lot from your dad. I don't know much about that situation... But i have watched your video's everyday. And kinda feel like your quoting him in your own ways. But i could be wrong. "I dont know". ✌,If he still is around, maybe add him to a few vids. I bet he would be a blast! Man he broke the mold with you! I hope you know that!!!!. He must, or had to be a fighter! Cause you never give up! When life hands you lemons, you just add way to much gas!!!!!!! 😆 maybe I've had too many cold snacks!!!! " I dont know" 😆

[@justingarrard]

Hell yeah a VGG video, perfect Valentines day gift just what I wanted

[@lawnfascist4890]

"giver her the onions". geezus. I busted a gut at that. Thank you for contributing to my fun fun Friday in Texas.

[@kenwillis8487]

And a lil bit of batree juice on the old coveralls is just weight reduction lol!

[@Yumatas]

I had a 51 model, when it would start to run like your did it was almost always the carb was gunked up and starving it for fuel. The carb is super easy to work on.

[@Squeejay3777]

I had an old 9n very similar to this one for several years. Probably the best running and easiest starting engine I have ever had! Just don't get the ignition wet when you are plowing snow.

[@RSCRedScreenChaser]

Holy Cow you needed a tractor! Can’t wait to see this one. Hell no, excellent choice, can’t go wrong with the old Ford N series. Happy Valentines Day friend. ❤️

[@ArmchairDeity]

RSC-RedScreen Chaser when I saw it on the trailer my heart lept... grandpa had one that was the yard tractor at the shop. The number of times I slowly walked alongside that bucket dangling a Cummins 444 off it, headed for the next truck we were headed to bolt into some guy’s OTR... memories man... omg...

[@ArmchairDeity]

NOTHING looks like that Ford N-Series bolt-on loader!

[@johnharr9707]

I just bought a nice one last fall. 53-56 jubilee. Forget what year it is. Jubilee I think was only a couple years. Now I have 2 !

[@markcovey2304]

@@johnharr9707 First overhead valve Ford tractor, right? You're right, I think the 600 came out in '55

[@johnharr9707]

Mark Covey yes my dads he left me is a jubilee 600. The one I just got last fall is a 56 or 57 I think. The jubilee came out on Fords whatever anniversary.

[@samfairchild05]

Yes definitely do more videos on the old girl. Thank you for sharing.

[@kitt7219]

Love this channel! TY to you and your family for always making us smile. Respect from Wisconsin and much love to the VGG family.

[@smokerschuggin475]

More tractor stuff! I love tractors. I dig the other stuff too, but I’m really looking forward to seeing more on this tractor!

[@randynelson4371]

Great episode. Look for a relief valve on that external hydraulic pump. You can adjust to eliminate the engine stall at end of stroke or heavy lifts. Have a great day and keep the videos coming.

[@kb_ehh]

Please do more of the tractor fixing and plowing. That was one of my favs so far. Thanks again for the excellent content. So funny.. the ford battery lol

[@jhutch1470]

First Last. You misspelled batree. LOL

[@kb_ehh]

@@jhutch1470 lol I spelt a bunch of stuff wrong for sure. Damm auto correct

[@jhutch1470]

@@kb_ehh Auto correct. LMAO

[@nrth-ng9sm]

J Hutch just like 1 2 tree

[@tylerramsey7396]

Yesssss finally guy was needing something to watch before the ol valentines day dance

[@elainejansky7904]

im wearing my VGG new Tee shirt, I loaded my groceries in the SUV with a " yeah " get in there .

[@BlueXonar]

"YAHHHHHH!"

[@jhutch1470]

Elaine Jansky. I'm the same way. One of my boys had his blower motor go out and wanted to know how to change it. I told him that I would jump on my laptop confuser 600, bleep bloop the digical interwebs, and find a vidja on how to snag out the electrotronics and snip another one in for a fella. For some reason he just shook his head. Go figure. A guy can't tell a joke around here.

[@reaganwright8209]

I've caught myself doing it quite a bit myself. Just can't help it.

[@jhutch1470]

@@reaganwright8209 Short fun is better than no fun. LOL I'd be proud to call you guys my neighbors. AR-15s, aka freedom sticks, beer, and cars.........not all at the same time though. Life would be even shorter. LOL

[@waden404]

@@jhutch1470 haaaaaaaaaaaaaaaaaaaaa. Love it. My son and I have also adopted Derek's vernacular of the English language. Only took me 82.367 second to do this diddly do

[@miltonbroome9725]

My favorite tractor of my childhood. Born in 1951. This one is newer but great memories.

[@connormeyer1613]

Man's just made watching someone plow a driveway the highlight of our day

[@jasonbarton4035]

A fellar never gets tired of batrys flying through the air! 😂

[@thesmallwoodlot433]

Just let it burn through my carrharts, there cheap anyway! Lol😂

[@SuperGliderman]

Deffinately more follow up videos on your tractor realy did enjoy this one.

[@timwindler408]

"There's your problem...Says Ford on it" lol Thanks for the upload!

[@frankstall1075]

Sweet ! I grew up running that Ford tractor. It was so nice with the PTO.

[@sparky72]

No idea if you still have this old boy but if you do, please bring it back sometime!!

[@axemanfishing2703]

Hell yeah, would love to see you fixing on this tractor for us. This puppy will lift engines, rear ends, transmissions out, move un needed stumps, pull cars out of the garage when they wont run etc etc. Heck, is the best hoist you ever had that is go anywhere, kinda like. Great 20 beer project from a Canadian perspective. Just saying!

[@KameraShy]

But would it lift Oprah?

[@axemanfishing2703]

@@KameraShy That is a tall order LOL

[@josephdavis2607]

And pull cars back out of the treeline

[@joshk.6246]

I like how angry she got after starting once you played with the loader hydraulics. A bonus with the blade and bucket you don't need a factory parking break, just drop them down, turn into the uphill if you're on the steep never hurts either.

[@tjbrinker]

"I'll just ignore it until it starts a fire" lol

[@ViceGripGarage]

😅😅🔥

[@williampendleton1554]

@@ViceGripGarage 8

[@jperry1444]

I had a '53 Golden Jubilee...worked that think from dusk til dawn for years. The carb is fickle and needs adjustment throughout the day as she gets hot. Dad would always get on me about "monkey-ing with the carb", but you could make small adjustments and keep the power up all day.

[@galaxieowner6930]

"The bad news is it makes no sense financially." Lmao. I've only watched a few of your other videos and to be honest I like them.

[@jeremyabele4781]

I like watching another guy struggle. It makes me feel better about my struggles. Keep em coming. Love ya bro.

[@ViceGripGarage]

Thanks Jeremy

[@walterkersting6238]

How many people do you know who love their work? That is what I’m learning; your work should be your passion.

[@the845railbuff8]

His shop neighbors be like, “oh look, Derek has a tractor now... DANG IT! “

[@ViceGripGarage]

ahahahah, accurate

[@jayinmi3706]

@@jeffd.8917 I used to have a sticker on my old truck..."Yes, this is my truck. No, I won't help you move."

[@ericyakey-wiley2619]

I can hear him saying “dang it”

[@olerocker3470]

@@jayinmi3706 I had that sticker too on my '99 F150. One of the best trucks I have ever owned.

[@perotekku]

18:50 Almost managed to go the whole vidya without a Ford joke, you Chevy guys just can't help yourself! 😂

[@hawkdsl]

Ford makes it sooooooo easy...

[@westie4ageturbo.749]

Fuck that was funny to see the battery sailing over his shoulder, had me chuckling

[@hudsonhawk0016]

We can't, lol🤣

[@JohnReall]

You're so right.

[@tjlabbee7856]

Easy pickins' really...

[@JjJj-bq7le]

I own one of those stubborn barely 20 hp tractors.. It was my dads.. Been using it to move bees, rocks, and it is still a stubborn tractor in a montana winter i hope i find more vids on this stubborn tractor

[@TheJohndeere212]

When I was 20 years old we had a 1949 Ford 8N sitting for 15 years without running and we decided to get it running and we sold it. It has the exact frontend loader just like yours.

[@5thMarDiv]

15:05 of course she shut down on you. You poured Bud light in there; she's a Coors light girl. Once you move to Not Minnesota, you can do whatever you want. Until then, up here, we got rules, bro.

[@jameybrandon965]

Pfff..Coors light. That's like having sex in a canoo.. FN close to water.

[@tallboy2234]

Jamey Brandon 🤣😂🤣🤣

[@jacktopolinski2475]

Move to not minnesota 😂

[@briancook7632]

Bud light is for Florida

[@gearheadsrus]

I'm a simple man. I see Derek and bad decisions I click like

[@psygn0sis]

Is it 2015 again?

[@gearheadsrus]

Ahh.. 2015. Filled with bad decisions

[@thesmallwoodlot433]

No it’s 2021... we now have other issues to ignore!🤓🤓🤓

[@mdwightj]

you've got to do a 302 swap in that thing!

[@rionsummers5939]

That tractor is like the one my grandfather had on the farm when I was a kid. He had it hooked up to propane rank mounted to the front that he refilled using an adapter to the tank he used to heat the house. He would let me ride over the engine with my legs hanging over the sides like riding a horse while he brush hogged…Lots of memories for me and eventually switched it back to running gas after he passed away. Thanks for the video Derek!

[@Monster404ftp]

I mowed a patch of grass on the farm with my great uncle's 1938 ford 9n tractor today, and I kid you not, this thing runs like a champ and starts right up the second you push the button, only has to pump one piston to get her going when she's warm, but she can be cold blooded if not started in a few days. As always, Great video!

[@AutoAli]

“A little barley....”. that was a blue BL can so we all know you were just adding water... 😂😂😂

[@kb_ehh]

Or fuel lol

[@Timbobjr]

Water just helps clean up the spark plugs. Trust me, I read it on the internet somewhere

[@johnhopkins6658]

@@Timbobjr Back in the 60 s we used to dribble water down into the carb with the engine running to de-coke the chamber, there was also a kit you could but on Exchange and mart to heat up water by wrapping a tube around the exhaust and spray into the intake.

[@Timbobjr]

@@johnhopkins6658 I've seen kits nowadays that spray cold water into the intake to cool the engines. Like the opposite almost

[@reaganwright8209]

A little water going into a hot engine flashes to steam, cools the internals, frees up the carbon deposits, and makes more power. They do it intentionally in high performance diesels for race applications. It's not the best for the fuel system and carb itself, and too much will corrode the cylinders, but since he mixed in some HEET in there, the methanol will scavenge up the water and it'll pass right on through.

[@stephencampbell4145]

We had one of those when I was growing up Had to wrench on it. All the time never could understand. That 6 volt positive ground thing

[@Tactical_Arborist_1776]

Love the tractor! Have had many N series. Loved them all. 8n started production in 1948 (hence the 8 in the name) and the 8n had the small bolt pattern on the rear wheels. That's probably a mid 40s 2N. The 9n started in 1939, and the 2N started in 1942. The 8N ran from 1948 to 1952. So with a 2N or 9N rear and front wheels, and an 8N engine block, I'm guessing someone swapped engines? I see it has the Sherman over/under drive, which is pretty uncommon, so no matter which it originally was, I'd say a guy got a darn good tractor! My guess is a 2n swapped with a 8N engine. Keep up the great videos. By far the best channel on youtube right now!

[@markabbott4163]

My experience with a Ford 8 n is ... Water or the main indigtediant of barley beverage will stick the valvalators right now. Clean firemaker is a necessity.

[@BrunerRoughneck]

love them old ford tractors

[@donc29]

Love the old tractor. Reminds me of the one I drove at a golf course years ago. I would like to see you fix it up.

[@Drspeiser]

Well would ya lookit that? Uploaded just in time for a guy's lunch break!

[@reaganwright8209]

Same here! Hooked my peepers in on the ole Ferd while I ate on my lunch today. Best lunch in a long while.

[@bn9983]

Feller buys himself a tractor, makes this feller click like immediately.

[@svenchristofferson2031]

I have a 8N that was my Grandfathers. He farmed with it here in the Willamette Valley from the mid 1950's on. I want to add the front bucket conversion so I was interested in seeing how that one was added on. Also on the tag end of the straps, I roll them and use one or two small bungees with the ball on one end to secure the roll to the straps

[@jessstarkey7626]

This has to be the most detailed and intensive walkaround ever done on VGG. No stone left unturned.

[@AmateurMechanicing]

Looked more like gas

[@robertmcbee4671]

Love your vid of the Ford 9N, actually all your vids that I have seen are great! I used to have a Ford NAA tractor. It was the love child of the 8N and 9N. As soon as I used it for plowing the garden, all of a 30' run, I hit a submerged fence post and broke the ring and pinion. It took me most of the summer working weekends on it to get it fixed. As far as I know it is still running and was a fine tractor. Two things to mention. 1) be careful if you use the PTO with a device that has kinetic energy built up from running as when you go to stop you won't be able too because the kinetic energy from your device will back feed into the PTO and keep you moving. Get a free running clutch for your PTO. 2) My NAA it had a positive ground for the electrical. It looks as though yours have been changed. Also try running the choke closed a hair and you won't have the stalling problem. Have Fun...

[@johnstanek6591]

Love watching your videos. You prob know this by now, A 50 is a 8n. 39-41 is a 9n. 42-47 is a 2n. 48-52 is a 8n

[@geoffkemp7]

I’d pay good money for an auto unload feature as smooth as that one!

[@ImaDrummer55]

I had a 1941 Ford 9N tractor in CT for 20 years; some days it would work fine, and other days, it would just SHUT DOWN after 2 hours on a fella !! Tried to restart it, and it would NOT have it !! Funny, unpredictable, quirky... I miss that old girl...

[@jerrycraig6522]

If I was gonna be honest, I'd say I really enjoy the sound of them old tractors!!!

[@porchfrontstudios9476]

Yes! More tractor repair work, that'd be great fun! Great video.

[@pikehunter23750]

Hardly any cheech and didn't even need Cosby in a can! Just loyal. 👌Mint!

[@timberhole1303]

Know who invented the phrase, “if it ain’t one thing it’s another”? Every guy with an old Ford tractor! If you love fixin stuff you’re gonna love that machine!!!!

[@jupitercyclops6521]

Timber Hole My dad use to always say "if it aint one thing. Its half a dozen others" He also liked "they get you coming and going " Ive found his favorite quotes to be right on the$

[@bmacd2112]

He's also going to need a lot more hammers. My dad use to refer to them as "Ford Tuning Forks" or "Ford Adjustment Tools".

[@philsheridan9223]

I'm getting addicted to your videos! I've got a Ford 8N with a six volt system and Walmart wiring. I've got to do some McGyvor (?) fixing on it so I can use it again. It's been 90+ degrees working in the sun and I get burned out at times. I have to put a starter drive on it and hope to convert it to 12 volts with alternator set up. Keep making videos! Lots of us love to watch you and your family turn swine into gold!

[@shawnbeeman8919]

I Rebuilt and painted a 8n in 1985. we used it to mow small trees and high grass for a housing development in Plymouth MN. I'm a mechanic also. 40+ years .

[@thomasbrasse3145]

When you added the beer, I laughed out loud. Love the old tractor. First carb I ever rebuilt was one of these old updrafts.

[@ViceGripGarage]

Cool!

[@surfinsilver]

I did too! Never expected that😂😂

[@georgejulien3286]

Put er in the danger zone! Ole peg would be proud lol.

[@capnhowdy3406]

My grandfather had a 1950's 8n Ford tractor. Seeing your old Ford brings back memories!

[@drow8569]

Do a carb rebuild and tank flush on the Ole tractor that sounds fun.

[@pbrascal37]

Good to see a guy's projects go like mine whenever I get to spinning the old wrenchalator on my junk in all my free times.

[@hondacota4rt]

2:23 as a swiss guy... I felt that. A little too much actually. Everything is so damn expensive!

[@scgoralski]

You had me in stitches when you were performing your 120 point safety inspection! 🤣. Love your channel 👍

[@bobchauncey63]

Gotta hand it to Ford, they built nifty little tractors

[@chrismarks9283]

YES MORE TRACTOR VIDEOS

[@chuck7109]

It's Friday, payday, a three day weekend, and VGG uploads. Makes a guy real happy.

[@justinphillips6136]

Chuck Knollman IV grab a few cold snacks for the weekend also .

[@chuck7109]

@@justinphillips6136 You got that right brother! Cheers.

[@lukebecker1959]

Damn right

[@Rock-Forehead]

4:20 - Squirrel!

[@trclark7689]

Love the tractor, you should definitely do more videos on it!

[@ViceGripGarage]

Ok thank you

[@yesno.idontknow.587]

Your personality is amazing and you seem like a great guy to be around!

[@Mytwocents222]

Really like the comments and the “if it works don’t mess with it” attitude. Keep the videos commin’. I bought a 2N Ford that did not like to start or run consistently. Rebuilt the carb and added electronic ignition. Problem solved. Did the same modifications to friends 9N. He now complains that he can no longer use the excuse the tractor won’t start when people ask him to do their projects. In norther Nevada, I can usually remove the snow with a broom, but I use the tractor to the level the corral, smash horse manure and move hay. Love that old Ford!

[@tphvictims5101]

9:36 this adjustment adds horsepower and aesthetic appeal.😁👍🏻 it’s difficult to keep the women off with a sweet ride like that, I know.

[@goodolef1009]

that was super satisfying when he was plowing the snow!

[@goonwop592]

Guess that's the only plowing we're going to see, eh!? lol

[@BricelynTowne]

A feller sure would appreciates some more tractorlator videos.

[@ViceGripGarage]

Thanks Bricelyn

[@leonardpeters3266]

Now that you have a Ford Tractor, I suppose you ought to get yourself a 67 Galaxie with a 428 so you and the little lady can go to town in style. It's a pretty sleek rig.

[@davifcamden7450]

Fold your straps and wrap thin wire around to hold

[@stevebillak1399]

lets see more of the old ford. love me some tractors

[@ArmchairDeity]

*spits coffee* OMG A LITTLE BARLEY 😂🤣😂🤣😂

[@pv2xeek]

The old girl is just unhappy with that Government Motors alternator on it. ;)

[@ViceGripGarage]

haha

[@StonkeyDomp]

Generic Motors! Hell I don't care, long as it charges!

[@FastBowtie388]

Yeah, he should have stuck with the 200.00 6 volt generator ;-) That alternator at those engine speeds is the most reliable part on the damn thing. He needs to add chains every 3rd link and fill those tires though if it's going to be used in the winter. If not filling the tires at least find a set of old weights.

[@Band1..]

@@FastBowtie388 I own a 1950 8n and it starts better than everything else I own

[@FastBowtie388]

@@Band1.. if you have the knowhow and found one taken care of. After 70-80 years many are cobbled and just in horrible shape. I keep my old case in good shape :-) Used it twice in the past week.

[@robertcurts4756]

yeah do some videos on the Tractor. I Love your Videos

[@cspfitch]

Thank you for your your funny take on things that you obviously know. We’ve all started out like that and it was all trial and error.

[@TheHowitz]

“Growin potato’s in the gas tank” hahaha so good. But seriously, do more “first start in 20 years” videos on old muscle cars

[@ViceGripGarage]

coming up! Hard to do in winter

[@16mmDJ]

your winter blend killed me 🤣

[@demetriusnapavon2219]

"Winter, my favorite Mistress..... She is cold, if you touch her, your skin will stick and tear away, if you try to remove your hand. She is bitter and backbiting, you can feel her presence, in your core, in your bones. She shows no mercy, unforgiving and cruel, making every moment a constant struggle. She is relentless, all of your time spent with her, you are wishing, you with one of your other, kinder companions. Plus to boot, she is hard on all of your tools and machinery. Nothing wants to work, when she is around and when she is around, her presence is always known. Oh yes, the 'unfair Lady', Winter....... "

[@thomasrivest5843]

I had a old Ford workmaster and I was amazed how good is started no matter how cold it was .

[@lanttop]

I think this was the first video I ever watched of yours when I was looking at buying an 8N. I subscribed and had no clue how awesome your channel was. Keep up the awesome videos Derek

[@jarrettbellboy]

"I suppose I should at least check on [the oil] a bit... [wiggles fingers in front the dipstick]... Yep thats good." I can't stop laughing. This guy kills me.

[@ViceGripGarage]

🤣🤘🤘

[@Tatertots1911]

0:37 squirrel in the back left

[@droseyz]

Lol how did you see that

[@wesoblander3648]

Mascot

[@bipolerzombie8622]

"Uh oh" lol I'm glad the channel is doing good you deserve it

[@ViceGripGarage]

Thank you friend

[@StapleCactus]

For the straps, you fold them up about 8 inches at a time (or whatever length you feel like that will get the job done) and tuck it into the ratchet handle so the last click holds it. If you made it too long or it's not holding tight, you can simply knot the ends together by putting the loop through the middle of the other loop and pull tight. If you do it right, you can even release the ratchet and keep the extra folded up for next time.

[@chrisao1987]

That tractor is a gem. Im sucker for these old tractors i buy them up when i get the chance.