I broke them both 🤪 Kraton 6s on 8s & Talion DR8 6s

What's up y'all just a couple quick sessions with two little monsters. Sorry I'm a little slow on getting these out lately. Been super busy with work. Appreciate y'all.
KRATON 6s on 8s CRCU- Titanium chassis, titanium CVDs Hexes, Hubs and Shock standoffs
M2C- ZRS shock kit, suspension blocks and captured hinge pins, rear tower support
BASHERQUEEN- servo saver, servo mount, ESC plate
Here's a link to the chassis, if y'all interested.
customrcupgrad...
ESC- Castle mamba monster X8S running on 8S.
Motor- Hobbystar 4092 1480kv geared 18t.
lipo's- HRB 4s 4000mah 60c 👍
Socokin 4s 3300mah 80c 👌
Arrma Talion 6s Seriously Upgraded. I built this car from the ground up started out with an M2C Talion chassis, towers, captured hinge pins, CVD's outdrive cups shock caps and pistons CRCU titanium center shafts. basherqueen steering top plate servo mount ESC plate and of course, her new body and cage system. Vitavon hub's and bulkheads. hobbywing max6 1650 combo Geared 22t rolling on 4s backflips LPs make sure you watch the end of the video I go over the car in detail.
Link to my favorite ESC definitely my go to
www.castlecrea...
Affiliate links
Horizon Hobby : alnk.to/4fQtrft
AMain Hobbies alnk.to/74uDhmG
AS ALWAYS, THANKS FOR WATCHING IF YOU ENJOY CONTENT LIKE THIS CONSIDER SUBSCRIBING 👍 AND RINGING THAT 🔔 RINGING THE 🔔 HELPS THE MOST SO DON'T FORGET ABOUT THE DING DING. CATCH Y'ALL ON THE FLIPSIDE.✌️

[@RcSpeedFreak-kk8wj]

Awesome jumps! I agree if you can drive The arms don’t brake. Unfortunately people mistake bashing for crashing and those are two very different things.

[@AldoLoyal]

Heck, yeah man it’s nice to hear other people agree too many people out there blaming them manufactures for their F ups. Appreciate your time, brother ✌️👍👊👊

[@Chon-c]

@@AldoLoyal I don’t like the rpm for some rigs. They flex to much & aren’t ridged enough. Popping them dog bones is aggravating AF. lol. But I’ll give you both a little hack I use for them & others. You can use a piece of channeled plastic to put over the front or rear side of arms to strengthen them . Just zip tie them on . 3D print them to fit if you can’t find something to work. That helps with the flexing. But not the hinge pin holes cracking . lol. but they are needed ,like with a REVO . The arms RPM made for them flex so easy. For the ones you got that just cracks ? You really should try using super glue ,then sprinkle baking soda on it before it dries. You’ll be surprised how much better & stronger it makes using SUPER GLUE man. I hated that shit & wouldn’t use it before learning this hack. That’s the difference it makes for me. Credit THUNDER RC for that one. Thats who told me about it. He learn it from somebody over at 30-north . It will make you look at using superglue differently from then on. Lol. I refused to use that shit before that.

[@CommanderAstigRC]

That was some longest insane Krispy cream donut 🍩 out there brother LoL 🤣. That Kraton shot out like a damn rocket 🚀 to the trees LoL 😂. Wicked wicked sends brother as always. Bummer on the breakages but they took some hard hits out there all part of the Fun 😁. Cool footage from the event too.

[@AldoLoyal]

Thank you, Cris. Yeah, those were some insane donuts especially the ones on the concrete. I couldn’t get enough of them lol yeah dude if those trees weren’t there. I definitely would have been over the fence or threw it 😂 appreciate your time, brother

[@larryowens3378]

@@AldoLoyal what brand are those batteries?

[@RevelationRC]

Oh man! I love that talion buggy body. I wanted one so bad. If I had a talion, I would have got that kit. Arrma needs to make one. Nice session, brother ❤

[@AldoLoyal]

Thanks dude and yes, that body looks awesome on the talion. Definitely a good looking RC. It would be nice to see Arrma come out with something like that.

[@Hungrybird474]

Hoooosa ! 😳. Man , that’s some good distance .

[@AldoLoyal]

Thanks 🤘 yes it was some good 🚀🚀

[@CRAIGMAC-RC]

I was waiting for a diff or something to go while doing those doughnuts 😂😂 your nuts aldo , love it keep it up

[@AldoLoyal]

Thanks, my friend. I keep telling y’all I don’t have problems with diffs very often. I guess I’m just lucky 🤷‍♂️😂

[@m2cracing168]

Killer bash!! NGL, that no handed donuts was wicked!!! Thanks for punishing the parts!!!!

[@AldoLoyal]

Thank you yeah those donuts were insane. Gonna have to get me a little concrete pad at my spot just for that 👍🤩👊

[@jasonh8470]

Every time I get notification from you I instantly think of Aldo Nova which is a good thing. I love watching the hang time on your rigs. From now on I’ll be using my Kraton to clean the dirt off my driveway. The slowmos are just killer.

[@AldoLoyal]

Thanks dude you made me laugh. Not too many people even know who that dude is lol that just goes to show how old we are😂 yeah dude donuts on the concrete with a little dirt is effing insane appreciate your time, brother 🤘👊

[@jasonh8470]

Glad to put a smile on your face. Your videos always make me happy as well. Keep up with the killer content.

[@bigtrev71]

Man love seeing that Talion DR8. Man them rigs killing at the pit. I just knew you was going to go over the fence....lol

[@AldoLoyal]

Thanks, Big Trev yeah brother I agree with you that talon DR8 is an awesome truck looks super cool and handles Awesome with that body. If those damn trees weren’t there I definitely would have been over that fence a couple times. Appreciate your time my friend. Have a good rest of your week 🚀✌️👊👊

[@RC-Closer1313]

Great bash sesh bro… two bad ass trucks💪🏻👍🏻

[@AldoLoyal]

Thanks man. It was definitely fun. Two of my favorite 1/8 scales.

[@BIGALSCRAWLERS]

Them donuts r mad 😂😂😂 I would say I can't believe u landed in the tree but this is u Aldo so I can believe it 😂😂😂 nice runs bro

[@AldoLoyal]

Thanks bro yeah, those donuts were absolutely insane. Couldn’t stop doing them lol and those damn trees are in my way. I’ll have to trim them back a little appreciate your time again brother have a great weekend.

[@BIGALSCRAWLERS]

@AldoLoyal no worries bro always got time for one of the best you tubers on the plant and one of the craziest lol u have a great weekend too bro

[@AldoLoyal]

@@BIGALSCRAWLERS THX 👊👊

[@lyleburns2640]

That was some killer bashing man I thought you was going to clear the fence on that one jump. Keep up the great work man

[@AldoLoyal]

Appreciate it man if those trees weren’t there, I would definitely have gotten over that fence a few times now, but that’s my only privacy that I have from the road so it’s not like I can just cut them down. I wish I could. Have a great rest of your work week.

[@lyleburns2640]

@@AldoLoyal thanks man and you do the same

[@JJ-lu6mg]

I wish I grabbed one of those DR8 conversion kits from Basher Queen. You should ask her if she would do another run of them… Aldo is the donut king 😂. I agree 💯% about the RPM arms. The plastic is way too soft on them. The only ones I sometimes use is the front upper ones.

[@AldoLoyal]

Thanks, dude and yes, I have asked her a couple times now. I think she was looking for some, but that was the last I heard and that was a while ago. I use the top uppers as well, but the lowers the v5 version they’re too hard and break the older version are way too flimsy. I just rather not even mess with them anymore.

[@RC4us]

keep killing it brother

[@TpPartsRcXtreme]

1 (one) word!!..You made my day my dear friend with this freekin killer awrsome bashing, and its only 7.55am here. That Kraton on 8s was def on the fence 😅..talk bout hang the eff time🥳🥰. DR looked good as few Aldo❤🎉 Arms,arms and arms..nothin wrong with the stock arms i never had any issiues with mine..if i broke one it was 99% my fault😂. Anyway ya have a superb day, im charging 2 bricks now.❤

[@AldoLoyal]

Thank you so much, my dear friend Thomas. Definitely an awesome day of bashing here. Both cars did awesome for the most part. The damages were all my fault. Can’t blame anything on that. I just wish everybody would own up to their mistakes when they have damages. I understand 100% that shit just breaks for no reason, but when you’re pushing out so many parts like these manufacturers do you’re gonna have a few bad ones from time to time if not, then this world would be fucking perfect absolutely perfect and we know that’s not the fact. Anyway have awesome day bash hard my friend 🚀💪🤘👊

[@SleekHobbies88]

Aldo heck yaa brother,get you some!

[@AldoLoyal]

Right on dude I try every time I go out. Thanks 🚀🚀🤘👊

[@paulrakis]

awesome bash my brother. yes sir your def the front flip queen Yes i know bad landing most of the time your gonna break something. Still Arrma tough. bASHER QUEEN, should make a body like that for the kraton 6s or the XL. that talion body is awesome.

[@AldoLoyal]

Thanks, man and thanks for the laugh😂 that comment about the arms I’m just tired of people always blaming Arrma saying they have shitty Arms. They do get brittle in the cold but honestly, I don’t have that problem in Florida so for me they are a lot stronger than say RPM that flexes too much or they’re so stiff they crack. And I’m with you. It would be nice to see some more of these body options on the other cars. Have a great week, my friend.

[@chefbeardsly]

Awesome sends man

[@AldoLoyal]

Appreciate it, brother still waiting on that mega video😂😂

[@chefbeardsly]

@AldoLoyal was charging the batteries for it today and my charger blew and I think it took a 6s with it

[@AldoLoyal]

@@chefbeardsly that sucks dude sorry to hear about that

[@cyclonerc1625]

All hail King salami ✌️😎

[@AldoLoyal]

Thanks bro🚀🤘👊

[@seancollins5162]

Its me against armma 😆

[@AldoLoyal]

Yeah, dude, I don’t know where that came from. It fits though 😂😂

[@jagergerg9771]

How far is it from the ramp to the trees? That’s a crazy ass send🎉

[@AldoLoyal]

Thanks man from that angle and that jump about 160 to 180 ft but from the big jump, I can get out to around 250 feet. I haven’t made it that far yet but that’s the kind of distance I’m trying to get to. The best I’ve done is around 200 to 210 feet.

[@Chon-c]

It would be no problem to make them T-bone bumperskids Salami ! Kydex thermaform sheets . Make ya a jig to drill them ,heat and bend 💁‍♂️. Hell. Man could make 50 in a hour with a water jet cutter doing 5 or 10 at a time . Be something to make a few dollars with . Want me to make ya Some ? That plastic they used is great for the design they used.

[@Chon-c]

That is exactly what they used .

[@AldoLoyal]

Thanks man I got a drawer full of those T-Bone products when they mentioned they were going out of business. I bought a bunch of stock and still haven’t used it all. I’ll be good for a while though. Good idea you should start making them. I’m sure you could sell them.

[@Chon-c]

@@AldoLoyal . Lol. Ya got a few ehh. 👍. I might look into that … what will they go for nowadays ya think ,like 30-35 $ ? 60 for FR & RE both ? I would actually turn up the very ends on the sides just a little. About a 1/2 inch of it at 45 degrees or something & round off some of the shape edges to get rid of the Plain look /design of it . Like as in for the style like you got on the Bash Q rig I mean. And I would do some a little more narrower & shorter to stick out less (like for the sledge) but similar design. Just more well rounded uniformed design. The t-bones are/was great. But I always thought they was a little gaudy & plain looking when it would be easy to make them less strait & without the sharp edges /corners. Know wutta I mean ? Everything I do ,I try to make it better even if I copy . Lol It’s a curse in my brain lol I can’t help from doing.