I Built a MINI Combination Safe from STEEL & BRASS - Precision Machining

[@Matthews_Tools]

Many of you guys wrote that it would be easy to take out the hinges. The fact is that it can be pulled out, but the door cannot be opened because it is physically blocked by the internal geometry of the door.

[@amazoniancustodian]

Especially with how meticulously you machined this work of art!

[@RestorationsFOD]

Even the untrained eye can see it’s impossible to lift the door from the hinges, Lovely work

[@Herr..Y]

Not for these German Guys "Kuchenblechmafia" #Safecracker 😉 kzbin.info/www/bejne/eWSWaaGrapdsZ6M

[@notsteve1475]

I would pay a King’s ransom for that.

[@Puppalump]

Till i take that pocket sized piece of metal and yeet it at the ground

[@RANDALLOLOGY]

I have repaired, worked on safer,, made parts for old safes, repaired and installed combos, and have taken ATM safes, modified them to be money safes for 50 years. You have done an excellent job making one from scratch,. The only thing you forgot is on a real safe there are fake bolts that are on the hinge side of the door that when closed they will go into recessed pockets that will not allow the safe to be pried open if the hinges are cut off.

[@mrsaizo0000]

Was going to mention the same. Perhaps it's a "school" project he is doing? When I was in school we made a canon, with wheels and a gun carriage for it. Not stainless steel, but could be treated in an owen so it would give a blue "color" to it.

[@philipinchina]

Exactly what I was about to mention. Dog bolts we call them.

[@RANDALLOLOGY]

@@philipinchina I didn't want to get him confused over generic terms. I worked for Mosler safe company as a service tech for 27 years till they folded, then had my own DBA for 20 years till I had a stroke

[@tomd3540]

@@RANDALLOLOGY sorry to hear bud, hope you're all good now?

[@TG-zd9de]

There is a leading edge on the hinge side. Unless the bolts are open the door won't open.

[@MagnetOnlyMotors]

12:00 nice dial ! 25:12 beautiful movement . Nice to have Dads shop to do all this in and with. Be thankful for this ! You’ve got a huge head start on most of us. Nice to see your NOT using CNC !

[@Matthews_Tools]

Thank you! :) nice workshop, but unfortunately it's not ours, I'm an intern here. I think it's more exciting than doing it on CNC

[@MagnetOnlyMotors]

@@Matthews_Tools sorry ,didn’t mean to be a put down. Fantastic craftsmen, sir !

[@DanielCooper1]

Solid work sir! Very pretty final project.

[@Matthews_Tools]

Thanks sir!

[@patrickretsel7048]

Very cool safe…..your machining skills are off the chart…..dial and EDM wire burning was awesome

[@eddietowers5595]

This is the coolest DIY safe I've ever seen, specially the machining of it.

[@Matthews_Tools]

Thank you!

[@ferencbesenyei7294]

Ment a mentés és a kezecske jó látni Kölyök hogy szuper szakember vagy s hazánk fia a magyar szövegen besirtam!🥰😍❤️👑🥂✌️👍🫂🍾🇭🇺

[@Matthews_Tools]

köszönöm szépen!🙏👍😀

[@BBQandStreetCars]

That's cool. No one has ever shown the top when you loosen it to change the tools. I've always wanted to see it . Thanks 👍

[@JustAnotherCraftsman]

In the flood of hot-glue and poor welding skills welding videos, it is nice to meet some real machining/crafting. Nice job! 😉

[@Matthews_Tools]

Thank you👍

[@c0ldc0ne]

Who built a safe using hot glue?

[@kisgergo99]

Szenzációs meló, jó volt nézni! :) köszönöm a videót

[@Matthews_Tools]

Köszi szépen! Örülok, hogy tetszett👍

[@carnedulce]

Very underrated channel! Bravo!

[@Matthews_Tools]

Thank you! I trust the KZbin algorithm, I hope it will be more popular

[@nicstroud]

You went to all that trouble, making a truly beautiful safe and then put the hinges on the outside. Otherwise, a work of art. Gorgeous.

[@Matthews_Tools]

Thanks! It was a miskate, but even so, it cannot be hacked due to the thick wall and door. while the lock is closed, it cannot be opened because the narrow space prevents it

[@fugasyn1714]

лимбовый замок своими руками, огонь =)

[@jasonsummit1885]

That's not just a safe, It's a work of art!😃👍

[@Matthews_Tools]

Thank you!😃

[@LU-D1GITAL]

Your smile is art 😉 have a great day broooooooooo!!!

[@jasonsummit1885]

@@Matthews_Tools Especially from a machinists perspective

[@overtheatlas]

More art then a safe realistically. It's a table piece

[@muddyfences5559]

Amazing craftsmanship. That dial turned out beautifully.

[@Matthews_Tools]

Thank you!

[@user-kjncop]

대단히 탁월하고 훌륭합니다. 최고 중에 최고입니다. 좋은 영상을 보여주셔서 감사합니다.

[@Matthews_Tools]

Thank you very much!

[@Anythings0000]

Check my vadios 😢

[@Cocodrilo2212]

My name si , David . Congratulations .

[@Matthews_Tools]

Thanks David👍

[@jerryjohnsonii4181]

Remarkable craftsmanship !!!!!!!

[@Matthews_Tools]

Thank you!!

[@juancarlosromeroguevara3170]

Excelente trabajo. Muchas gracias. Saludos desde Cuba.

[@Matthews_Tools]

¡Muchas gracias! hola desde hungria

[@juancarlosromeroguevara3170]

Es un trabajo genial. Gracias soy cerrajero. Saludos

[@nikolich253]

Игорь Негода и Олег Певцов прослезились бы от состояния Фрезера и точности фрезерофщика))

[@dokep__777]

Декоративный сейф, отпили петли и откроется сразу, а если добавить в двери пару штифов со стороны петель и уже так просто не вскрыть. А так в целом очень красивая игрушка получилась., мастер с руками из нужного места!

[@Matthews_Tools]

Thank you my friend! Unfortunately, the hinge is the weak point, but if it wasn't there, the door would still stay there, as it is physically obstructed from all directions by the wall.

[@Mega37093]

Matthew's Tools👍👍👍

[@9Dekchang]

Nice home factory

[@Matthews_Tools]

I come here for an internship because of school

[@Gollammeister]

Bet this custom piece cost a lot of money but worth every penny

[@Matthews_Tools]

the truth is that they even paid for it. all materials were free when i made this video i was an intern at this company.

[@williamh.mic.8712]

COOL! Side note: I still dont know how combo locks work! Haha!

[@Matthews_Tools]

that's not good! I'm sorry for there weren't enough videos for it

[@elluisito000]

I think is safe to say that you know what you're doing. Thanks!

[@Matthews_Tools]

thanks!

[@amirheydari3246]

Very very good and nice

[@Matthews_Tools]

Thanks👌

[@MdAli-xl2uv]

Excellent vai🇧🇩🇧🇩🇧🇩💖

[@Matthews_Tools]

Thanks!

[@viragovtwin]

Very, very handsome safe. Can only imagine what kind of price such an artful piece would fetch. Well done!

[@Matthews_Tools]

Thank you! the amount of time we invested in it would certainly be worth a lot

[@romeovidalrodriguez7754]

hola el video está muy bueno 🤜🤛👍

[@Matthews_Tools]

Thanks👌🙏

[@imrepolcz3923]

Nice work Haver!

[@Matthews_Tools]

Köszi szépen!

[@Gollammeister]

Imagine a safe within a safe within a safe 3 safes within each other what a feat of engineering that would be not to mention the massive expense

[@Matthews_Tools]

you just gave me a great idea :D

[@ozsebszogeczki5543]

Tiéd a cég? Svarcba biztos nem megy az ilyen 😅 Gyönyörű munka.

[@Matthews_Tools]

Haha jó is lenne.. amikor ezt a munkat csináltam gyakornok voltam és egy projekt munkaként készítettem. Köszi szépen👍

[@Gollammeister]

Very precise engineering

[@Matthews_Tools]

thank you!

[@blindbrick]

Cool idea. I just decided that this is going to be my next project, after I get my ejection seat recliner working.

[@Matthews_Tools]

that's serious! take care of yourself, my friend

[@Peter_Wales]

23:00 Looks like an old Sata. I can't imagine how you can make it. Wonderful work! Greets from Germany

[@Matthews_Tools]

Haha you are right😀 thank you! Greets from hungary

[@Peter_Wales]

@@Matthews_Tools 😄

[@shahriar1159]

What a delightful video, thank you for sharing 👍👍👍🙏😎

[@Matthews_Tools]

Thank you so much!😊🙏

[@fahmi9867]

luar biasa , seseorang pekerja profesional ❤️😎

[@Matthews_Tools]

Thanks!🙏

[@vimo2741]

Nem lett rossz. 👍

[@Matthews_Tools]

Köszi👍

[@buescher59]

That is beautiful great craftsmanship

[@Matthews_Tools]

Thank you!

[@Bruno.Bastos]

Parabéns! Você realmente é um gênio da inovação. Fazer essas coisas sem cola deve dar um trabalhão com certeza. E que você cresça no KZbin cada vez mais...

[@Matthews_Tools]

Thank you buddy! I hope it will be as you say🙏

[@epidemikm5525]

Hallucinant,quel travail. Bravo👋

[@Matthews_Tools]

Thank you!

[@wagnermoura7624]

Well done David

[@ninaaguirre599]

Naaaaaaaaa es un crack Don !!, siga así :D

[@ibrahimfanon2839]

Bravo 🍾

[@Matthews_Tools]

Danke!

[@samantafox4311]

Петли - супер, 2 удара молотком и сейф открыт!

[@Matthews_Tools]

the hinges are not durable, but you cannot remove the door from it, as the wall physically blocks removal from all directions

[@hernancoronel]

My OCD: at 1:27 the small drill hole is slightly off the mark. OMG, what a nice video! Thank you!

[@Matthews_Tools]

thank you! I appreciate!

[@dallasgrant]

Simply amazing, no other words needed.

[@Matthews_Tools]

Thank you!

[@jas20per]

All that wonderful machining work second to none, then thirty seconds with an angle grinder all the jewels would be in another persons safe keeping.

[@Matthews_Tools]

all safes can be hacked in some way

[@jas20per]

@@Matthews_Tools That is very true but some safes take much longer to be hacked than others.

[@NoodlesRamanoff]

This was an absolute pleasure to watch.

[@Matthews_Tools]

Thank you!

[@larrykelly2838]

Beautiful work, beautiful safe.

[@Matthews_Tools]

Thanks!

[@dmitrypavlovich8945]

Круто. Очень не обычно. Всего самого наилучшего в жизни.

[@Matthews_Tools]

большое спасибо!

[@subb26]

если не учитывать 50% лишних операция,при наличии "СОДИКа",то норм...

[@danquigg8311]

Were there many 'make overs' during the machining? Are you left handed? The hinges seem to be on the 'wrong' side. GREAT video!

[@Matthews_Tools]

yes i am left handed in some things! this is how it turned out😃 Thanks🙏

[@tophatvideosinc.5858]

great job putting the hinge on the outside, that rivet looks like a nail clipper coud pop it off too.

[@Matthews_Tools]

Thanks! if there were no hinges, the door could not be removed. due to the wall thickness of the door and the accuracy of the door, it cannot be removed as it physically obstructs it

[@LelleKidd]

Nice little gun safe

[@Matthews_Tools]

it can hold maybe 1 hand grenade :D

[@LelleKidd]

@@Matthews_Tools Sorry, it was suppose to say ”little gun” safe… 😂

[@thalesbarbosa8535]

Beautiful work

[@Matthews_Tools]

Thanks!

[@keithb4007]

I really enjoyed this video. But with all due respect, the door was essentially just a modified lock, and I was less than thrilled with your locking bolt mechanism. The precision is awesome and the effort is superb. Keep up the tight work!!!

[@Matthews_Tools]

Thank you! if I were to make a new one, it would certainly be different, but fortunately it still does its job

[@airgunningyup]

incredible.. Most people would have welded the box assembly , just using steel plate. Making it from one solid block is insane

[@Matthews_Tools]

Thank you! yes, indeed, this was almost the most difficult part of the whole production. I wouldn't do it again😅

[@UmbyWatch]

WorkArt ! 👏👏👏👏👏

[@Matthews_Tools]

Thanks!!

[@Just_Wimski1130]

Nicely done 👍👍👍

[@Matthews_Tools]

Thanks!👍

[@frankierzucekjr]

This is amazing. I've never seen tools like this before, you must have an awesome job. I didn't know half of these tools existed. Just awesome, great work

[@Matthews_Tools]

Thank you! technology is developing and almost anything can be manufactured

[@frankierzucekjr]

@@Matthews_Tools thanks bud, this was amazing and fun to watch

[@lolcec81]

Комментарий в поддержку канала и ролика, а также труда мастера.

[@Matthews_Tools]

Спасибо

[@kulebyakinjoe]

Really good job!

[@Matthews_Tools]

thanks!

[@sashok2505]

Работа потрясающая, но сердце кровью обливается, когда столько металла в стружку

[@Matthews_Tools]

Спасибі! на жаль, так

[@ianfiddes9871]

Nice one

[@Matthews_Tools]

Thanks

[@evelinsanchez9980]

Beautiful work incredible job 11/10*

[@Matthews_Tools]

Thank you🙏

[@evelinsanchez9980]

@@Matthews_Tools 👊👍🏼🤗

[@thomaswhicz8223]

wow, insane job.... really niiice

[@Matthews_Tools]

Thanks!👍

[@paladiumearth7178]

that bazdmeg at 20:25 gave me a good laugh.

[@amazoniancustodian]

Absolutely beautiful!

[@Matthews_Tools]

Thank you!

[@istvancseke4746]

A maszek az megy🤣 szép munka amúgy 😉

[@Matthews_Tools]

Az mindennel fontosabb😂 köszi!

[@3DIYOriginal]

Awesome Build !!! 😎👍🏻👍🏻👍🏻

[@Matthews_Tools]

Thanks👍👍

[@jefferybarnes7817]

you got it buddy.

[@Matthews_Tools]

Thank you buddy!

[@jonbottoms8988]

Excellent job sir.

[@Matthews_Tools]

Thank you sir!

[@wyattselleck7236]

I’m impressed. Liked and Subscribed 👍

[@Matthews_Tools]

Thanks buddy!👍

[@hp9mm]

One basic flaw, hack the hinges away and hey presto, you're in the safe.

[@Matthews_Tools]

this is a big mistake! the hinge is only used to open and close the door. it has no security features. if you removed the hinges the door would jam due to exact tolerances and the thickness of the door. it is impossible to take it off without destroying it!!

[@davidkolman9952]

Gratulálok nagyon jó lett.🍻

[@Matthews_Tools]

köszii szépen kedves Dávid! 🙏😁

[@Gollammeister]

Now this is how a safe should really be decent thick solid walls door etc

[@BelladonnaBB]

Absolutely beautiful work. :)

[@Matthews_Tools]

Thank you :)

[@loricastro3772]

Nice job! Thanks a lot for sharing

[@Matthews_Tools]

Thank you!

[@davidsempires]

Brilliant work😲

[@Matthews_Tools]

Thank you🙏👍

[@grizzlijonov7578]

Вот что с ним не так, невероятный парк инструмента, судя по выполнению работ там опыт вообще зашкаливает. .но блин почему он использует ножовку?! Болгарка это для девочек? Чувак и так себе жизнь усложняет а тут это...триндец. но за видео однозначно +

[@danielshin1984]

That box looks so cute! Anyone would like to have it!

[@Matthews_Tools]

Thank you!

[@noorulhudakhan964]

We appreciate your hard work 💯💯

[@Matthews_Tools]

Thank you!🙏

[@Teroitin13]

Király! Nem is tudtam, hogy van ilyen magyar csatorna! Szép munka! Milyen huzal az amelyik víz nélkül dolgozott?

[@Matthews_Tools]

Köszi! Egy egy Japán gép, ennél a típusnál állandó huzal van és menet közben oda-vissza feltekeri magat. Azt nemtudom megmondani miért megy víz nélkül

[@adnanshaukat2656]

LOVED IT, simply awesome the whole video was very very informative..❤❤❤❤❤

[@Matthews_Tools]

Thank you!❤

[@TheWolfster001]

Loved it.. Lots of skill & talent there.. you just earned subscribing...

[@Matthews_Tools]

Thank you my friend!

[@adriankohli4870]

Top Job, Sir👌 Versuche, das Schlittenspiel an deiner Maschine zu überprüfen 🤔

[@Matthews_Tools]

Vielen Dank! Ok, ich werde es machen!

[@LUIZRCMACHADO]

[@edb4456]

this was posseted on my b day

[@Matthews_Tools]

what a coincidence

[@dronenuts1156]

Very cool

[@Matthews_Tools]

Thanks!

[@quakxy_dukx]

Those are some serious machines. What are they and how do they work? 17:10 and 27:55

[@Matthews_Tools]

These are EDM machines. very nice machine, you can cut all shapes in 2D

[@Matthews_Tools]

tension cuts the material and the machine adjusts the appropriate strength depending on the material

[@quakxy_dukx]

@@Matthews_Tools so it’s kinda like an industrial hot wire cutter for metal

[@samuelfellows6923]

🤨 - “EDM”, water for cooling and electrical conduction?

[@peterwooldridge7285]

A mighty fine effort. Now for your next project can you make a 1:12 mortice lock?

[@Matthews_Tools]

thanks! it would be possible, but I don't think I'm doing it

[@NineteenEighty8]

amazing work.

[@Matthews_Tools]

Thank you!

[@haluksipahioglu2613]

Amazing👍🏻

[@phillippe.cai.]

Этот замок легко вскрыть! Я делал все сложнее - мой вскрыть невозможно!!!! ( 64 узла и механизма, на каждый полный оборот рукоятки - делают более 1 тысячи посторонних щелчков, а сам механизм лимба, не издает щелчков при обороте. Поэтому на слух вскрыть его невозможно 😁

[@Matthews_Tools]

this also requires a lot of patience to be hacked, but then how much is needed for yours :D

[@dokep__777]

Можно проще гораздо, спилить петли и всё, он даже элементарную защиту от взлома не предусмотрел.

[@phillippe.cai.]

@@dokep__777 Я делал не згораиваемый вертикальный сейф и монтировал его в пол. Петель нет снаружи, а дверь сейфа утоплена в корпус сейфа. Вариантов несколько и оба подразумевают только варворский способ, а это займет не час и не два! Сверлить тоже не вариант ( дверь толстая и в первой полости, я заложил штуки, вроде керамики, они используются на "тайфуне" в лобовой части, не горят, не сверлятся) При желании и наличии нужного оборудования, его можно вскрыть - но я не тот человек, к которому могут прийти такие спецы, а остальным он не по зубам, не успеют выкарчевать 😁

[@jamesfield5346]

Wow.... just wow...that's all I got, lol

[@Matthews_Tools]

I appreciate 🙏

[@mojtabajamal3457]

very nice job

[@Matthews_Tools]

Thanks!

[@tinaliebe5118]

Nice work it makes me want a mill more than ever or even a metal shaper would do me

[@Matthews_Tools]

Thanks! now is the time to get one

[@tdasogood8720]

Это практическая база вашего учебного учреждения? Спасибо за видео!

[@Matthews_Tools]

я ценю это! Да! работа над собственным проектом. мне очень понравилось и я многому научился

[@bunkerhunter75]

Bravissimo 👍

[@Matthews_Tools]

Thanks!👍