I Built a VIPER V10 Powered NISSAN 240SX!

[@scraplifegarage]

$100 OFF Improved Racing Catch Cans! www.improvedracing.com/scraplife

[@StormyPyro]

sorry but $350 for a catch can is kinda wild

[@bartmix8994]

I hope that bridge collapse isn’t as bad for you guys as it looks from a distance. The state (with help from the federal government) need to put up some type of temporary bridge that the military would use in a war, maybe some ferries for people with park and rides on both sides of the bridge.

[@scraplifedalt]

@@bartmix8994thanks. It’s not “devastating” as far as day to day to traffic. There are several other ways around. The port closure is the major problem. For both state and national economies. And the local families with workers there.

[@scraplifedalt]

@FatRimTruxmeh. These things are shit boxes anyways. 😁

[@007Knightjp]

What engine oil did you use?

[@danhard8440]

kinda funny that the guy that boosted a Juke would build THIS epic beast🤣

[@alexelrod242]

All jukes are boosted

[@cliby25]

​@@alexelrod242 nope.

[@alexelrod242]

@cliby25 lemme rephrase, in the US, where lee c parts is, all jukes are turbo

[@50H3i1]

He has a long way to clean his reputation . But he's getting there

[@milo5279]

@@50H3i1 what did he do

[@CC281]

6:02 thank God the viper is getting the vitamins it needs.

[@Staying_Dangerous_Official]

This is what I recommended on Lee's video when he asked what to do with the pair out of the truck! Awesome!

[@peterthornton2396]

17:30 I do the exact same thing with the drill and sand paper 👍🏻

[@Margot_est_douce.]

Your channel's commitment and sincerity are truly special. Congratulations

[@acunit1639]

These bots really need to be taken care of

[@fredericoespinoza]

good luck , they multiply almost instantly, its ridiculous @@acunit1639

[@LeatherSanders]

fake ahh boy comment , dude buys views n comments😅 why do they buy the comments tho, as if us and KZbin admins can't tell when you go to request your 100k and 1 million subs plaques! 😅 That's why u see ppl hit 100k then they drop down below the 90k mark cuz admin goes thru their shit and they know what to look for, everybody starts buying subs n views n comments once they pass like the 50k mark😅it's pathetic AF

[@mroberts7519]

That's crazy. When I was in school for auto tech, I had an instructor that got on to a kid for looping his hand through the steering wheel and turning the engine on. He pulled his arm out and turned to everyone and said never do that because the power steering system can have an issue and the wheel will snap around and has enough force to break your arm. I wonder if he had first hand experience...I've heard about it but never seen it in person.

[@LeatherSanders]

damn dude, imagine having to tell EVERYONE you see for a month n they say "Bro how'd you do that?"

[@ASEWorldClassTech]

I went to a fishing and Tackle place years ago and got a kit to make your own fishing weights and used a lead weight jig with the end of of cable submerged...

[@KingJojoB]

Who has the the most projects in the shop right now

[@Idk154]

Me

[@imboard8349]

Me 😊

[@JasonMcCord-qk3yb]

It’s gotta be Dalt

[@Idk154]

@@imboard8349 no ME

[@derekgarcia4417]

😊😊

[@kickit59]

That's what I like about you Guys at Scraplife! Your not afraid to try the wild & crazy! When I was a kid I had a 62 Nova painted Root Beer Brown with a 327 and a straight axle at the time there was nothing like it in my town. Keep up the great work Guys!

[@eg6gsr]

I've been waiting to see this for a while. This is the car that made me sub to the channel so I'm glad it's getting some love and is moving

[@Heartless_Media]

I just saw the video of them announcing the Ram and thought, “hey, lemme see if someone put a viper motor in a 240” and it wasn’t until they showed the Mopar graveyard that I realized it’s the SAME GUYS! You my friend just earned a subscriber

[@JaxxonBlaze69]

I remember seeing the first short about the manual Demon on Lee's other channel, then a few weeks later I clicked on a long form one that was part 2 of that series on this one. I thought it was the same one at the time and didn't realize until I went to find another video and realized I wasn't subscribed yet. Been here ever since and I don't regret a single second wasted watching one of these videos

[@Heartless_Media]

@@JaxxonBlaze69 WAIT YOURE RIGHT, I saw the demon too when it first came out!! Holy shit these guys are amazing at what they do!

[@JaxxonBlaze69]

@@Heartless_Media oh they're awesome. These guys, Crucible Coackworks and their 60s inspired Porsche boxter supercar, and Death by Boost and the Rail from Hell are what motivated me to ask my pops if I could use his 1998 Chevy Corvette thats been parked since 2018 as a sacrifice for the same type of project. Surprisingly he said yes so now I'm working on that. I'll post about it later

[@Rafinhaguitar]

im so happy seeing fueltech gets recognition in the us market, theyre big for us in Brazil

[@jjmmcds]

Do you guys really think that commenting absolutely everywhere on the internet that this thing is made in Brazil really helps the brand?

[@Rafinhaguitar]

@@jjmmcds its about being proud of something your country does right against all odds clearly by the entitled comment you arent capable of understanding

[@Viking8888]

Love the 240, love the Viper, I REALLY love the combo and can't wait to see it tuned.

[@josephmaldonadojr4692]

I love that at idle it almost sounds like a cammed out straight 6

[@Kris_Si]

I truly love this channel, the fact i work at a shop where all we build is race cars i love all the things i learn here. I’m here to stay!

[@PANTYEATR1]

You guys are living my Fast & Furious, automotive tinker'er dreams. You have earned my subscription 💪🏆

[@TLO7]

so sick of LS swaps. finally a COOL engine swap thats worth watching

[@toddthezondalover645]

So sick of affordable power...

[@redlight3932]

@@toddthezondalover645 let them hate theyll never drive anything as fun as a junky classic with a turbo 5.3

[@toddthezondalover645]

@@redlight3932 Factual. You don't need anything more in the right chassis

[@toddthezondalover645]

@@FatRimTrux You say RB30. Then mention junk..... FOOOOOO

[@toddthezondalover645]

@@FatRimTrux Babe, wake up. It's time to rebuild the RB for the 3rd time this week.

[@OoOoOoOoOoOoOoOoOoOoOoOoOoOok]

Fueltech really make a difference

[@L0000NEY]

It's about time, I've been waiting for this for so long.

[@timothyhervieux5673]

Finally we get to see this car come to life. Thank you !

[@eljordy8224]

Foreal huh jit 👌🏽

[@edwardmatthews5899]

That’s awesome refreshing to see such a build and not a ls or k swap this thing with a little boost could dominate the drift and drag scene easily.

[@Aleknu84]

I like Tim! Also love the "new" Dalt!!

[@gd1996]

I use throttle cable stop clamps for stuff like that... then you can adjust as needed by using an allen wrench. It's how I convert cables to use ls throttle bodies also.

[@Silent_Shadow]

The Viper is the only Dodge I ever cared for, and I love old Nissan cars. This swap is like a Nightmare come true in the best way! Amazing work dude.

[@mjc1177]

Man that 240 is sick!!!!!

[@THAT_WUN_DUDE]

Probably one of the coolest, out of the box idea builds right now. Definitely subscribed to see what happens from here. Also, getting custom valve covers that say ScrapLife instead of saying Viper would be a nice touch.

[@daryl9799]

Such a cool build once it's fully done that car is gonna be a beast.

[@andrewbeetz2196]

You did it man! Thats awesome! Such a cool idea!

[@playboy901]

Great video! Maybe think about getting another throttle piece at the end just in case that crimp comes a loose

[@JDV-ww4db]

I’m from England and I’ve always had an obsession with Vipers, this is by far the best swap in history 🔥💪

[@mrgapp838]

Loving this build!!!!! Even though I personally have 3 LS Swaps, I am pretty tired of LS content everywhere I look.

[@Greg1096]

Am i the only one that thinks Dalton has a radio dj voice? BTW those are some badass seats!

[@jonathanjones1814]

Can't wait to see the finished product, awsome build guys 👌🏾

[@aarondavis7885]

I been tryna get a 5.3 for my truck while this dude viper swapping a 240🤣🤣 living my dream life dude keep up the content

[@nunyabizznizz7326]

pretty cool.....i usually roll my eyes at things like this, but it is pretty rad

[@Kipu420]

SICK BUILD, AWSOME CONTENT

[@motonvipr]

FINAL:LY!!! THANK YOU FOR GETTING BACK TO THE 240!!! I miss my kouki!!!! Love my Viper tho. Would love to get this! LOL

[@EgTwizzy]

Nobody on this app does it like you guys. Another amazing build 🔥🔥🔥

[@tylertolson8886]

I want to see this car too. You guys are building some crazy stuff

[@kh_trendy]

10:16 is a troubleshooting genius.

[@B_M_A]

Would highly recommend putting some of that DEI reflective tape on the dual master setup or make some sort of heat shield around it and apply the DEI on it.

[@pedrovictor4256]

FUELLTECH MENTIONED, BRASIL NUMERO 1!!!!!!!!!!!!!!!!!!! WHAT THE HECK IS A GOOD GOVERMENT

[@BigBoyz33]

FINALLY ive waited since the last update on this build, its so special

[@Chris.Davies]

Thank you for simply idling the engine after starting it. More than 95% of all engine damage occurs within 15 seconds of start up from cold. It can take 15 seconds for oil to reach the top end of the engine - so it's pure metal on mental until then.

[@pethromorialte1159]

I had given up on you Viper 240.... but yeh, Kudos to you young man!

[@hcolin4165]

FINAAAALLY!! What a build brathaaa!!

[@Andrew_kiwi_AF]

This is one cool conversion 😊

[@dexburwell]

No Hood still All Good - 240sx with Viper engine…. Awesome build guys 👍

[@dailyfb5481]

12:49 sounds like a damn airplane starting up, sounds so good 😤

[@mik3ymomo]

This was an ambitious swap but I love it. Nice work team.

[@ethanbauer-tp6bn]

Even better choice then what I though you were doing one of my dream cars man great idea and great execution of the idea!

[@JakeHughes-oo7gy]

Not usually into cars but this sick build

[@LarryHeagren]

Big engine in a little car makes it fun. I put a ZZ430 (350 cu in 430 hp Chevy Crate Motor) into a 75 Chevy Vega with a ZF 6 speed from a 94 Corvette. There is nothing more fun than driving a small car with too much horsepower and torque. Be careful in the rain. The torque will have you doing 360 degree spins from a start if you hit the throttle too hard. I did that too. This is a car you will need to respect. Oh and that grin on your face says it all, congratulations!

[@LeonBarnes85]

I love what ur doing tonthe car but that beautiful truck has caught my attention...i need more of it

[@IlovemySubaru]

Amazing bro so glad to see y’all get that beast on the road

[@TJRELITE]

Consider some front rigidity upgrades since you now have a Behemoth under the Bonnet lol, nearly 4X the standard Displacement! 👍

[@Reed911c]

I did a viper v10 swap into a 65 dodge coronet with (for now) 48re & winters quickchange rear end RMS FRONT POWER RACK & COILOVERS ,REAR 4 LINK ,,I HAVE HAD IT GOING 2 YRS ,,NEXT IS TWINS & FUEL TECH

[@antho6622]

It’s really a hell of a project that you’re doing there with your 240 sx

[@JbrZee]

I Been waiting forever for this video

[@christopheraustin918]

I suggest people who like this to go and check out the Hemi powered Jeep Renegade. It’s only a 5.7 but still just imagine the smiles per gallon these guys will get with these beast. This is the sickest 240 around and you can’t change my mind. Subscribed. 💯

[@Chriscosner1810]

I can't wait to see more on this build keep Keep the videos coming brother

[@jonathanramoslexusmaster298]

The fuel pump is supposed to have its own relay and wiring preferably you should trigger the pump on by activating the ground on the relay. Essentially. It would be hot all the time if you had the ground attached to chassis ground. But with stand-alone it can energize the coil in the relay through the ground signal it was wired originally too. Risk burning out the ecu wired that way

[@Parker.plays1]

Always a good day when you post 💯👍

[@TheRCDaddy]

THIS IS GLORIOUS.

[@David-uz9qw]

Amazing! Such a cool feeling to finally drive it

[@hunterrichey7963]

That is the best idea ever makes me want to try to build something to

[@Demitri1k]

been waiting on this!

[@ErwinWernerTeichmann]

This car is sick! Congrats guys.

[@ctvette1318]

Great video guys! I thought for sure Lee was going to send it!!!! Lmaooo

[@robert23497]

LOVE SCRAPLIFE!!!!!

[@Razor6On3]

This is the dopest swap on KZbin... congratulations bro.. absolutely sick as F**k

[@BoxFwog]

"Do a lil bit... OOOOOOO do that again" 😂😂😂

[@ThatZenkiS14]

lol i knew what that steering issue was, because i did that stupid ish too. also this vid just made me want to go ahead and get my s14 back up and running.

[@jackcaldwell485]

Hot damn , not another car someone slapped a fregging LS into, I get it part for that gm platform is plentiful, but it gets old watch the same engine into everything! Thanks for sharing man!

[@midwestmusclecars]

What an amazing car! Good job guys!

[@NickyChaos77]

The post I've been waiting months for😊

[@bikescarsandmore6156]

I never clicked on a KZbin notification so damn fast. I see viper, I’m clicking.

[@finnmacleod3774]

Great job! Love this channel. Not a fan of the colour of the car but this build, along with all else you do, is awesome❤

[@SirPickelDic]

I've been waiting for thus!!!!

[@deadmangreedo]

Only time I have ever wanted a JDM car in my life this think is sick

[@lawabidingdad]

You guys got a quick turn around jeez!

[@musikman337]

@4:55 😂😂😂 that was definitely out of the Monty Python comedy playbook!

[@Greg1096]

This would have been a cooler swap if he had put the viper engine in the RX-7, i just dont like for the 240 platform.

[@fpSmoker]

Very cool. Absolutely no business being that good already.

[@psycopaintball22]

That throttle cable giving me some slight ptsd. On my last fox body, I tried to replace the sticky throttle cable with a lokar universal from the pepboys speed shop. It was cut to length with the end piece held onto the cable with set screws. I probably cut it a little short and took it for a first drive about 15 minutes away. On the way home, I got on it and it pulled out of the set screws. Stupid me brought no tools with me and my phone died as I tried to call my wife for a ride. I am proud of my mcguyver hand throttle I made out of the pararcord on my Keychain and some unused old speaker wire that I yanked out of the rocker panel

[@MrRagequitnow]

So I've been watching your channel and many others like it. I have taken inspiration and plan to launch my YT video making by the end of this year. My project, worlds fastest Pontiac Aztek! But wait there's more. I'm full frame swapping it, because the unibody is to damaged to repair, and I want rear wheel drive. Plus it makes it easier to drop a 6.0l LS in it and a supercharger. The thing most I dread is the wiring and engine management. I'm a street sweeper mechanic, I fabracobble bullshit together all day, everyday. The trucks we run very in age from last year to the f'n stoneage. I hope people will like my project and I have success like you. Thank you for your effort and inspiration.

[@deancwhmackinnon6547]

Tim the new guy!!!

[@frankmorain2755]

Awesome job fellas. Love it

[@roymartinez2230]

Best car combo for me wanted a viper and a 240 and having a viper engine in a 240 I’ll take it now build the engine to take off some weight

[@darrylskerman6808]

CONGRATULATIONS! Awesome work. And the Viper motor looks like it belongs in that engine bay.

[@williamdennis4250]

Awesome sleeper😎👍

[@blazendanke]

Good work guys ,great swap sounds amazing 👍

[@Backyard_Racing]

I hate to say it but that’s one of the coolest cars I’ve ever seen

[@deborahchesser7375]

WHOA ! 😳 do that again 😆 man once that car is dialed in it could be a daily, I love it.

[@bobx5400]

Well certainly an interesting choice of a build! I’m sure it’s going to have everyone scratching their heads! 👍

[@sleepervega71hill28]

Everyone has. "The Heart beat. (Yes) Born with. But sometimes. A pace-maker Will be used. Over and over

[@Shane_edites.]

Was thinking right it has a what. V10😮

[@Saabkid900TT]

I have SOOOO MANY questions. I just stumbled apon this and its been my plan to Viper swap my 300ZX for almost forever.

[@mustangjunk6013]

Im here for this! - Meatloaf