I Can’t Hear Anything in Pro Tools! (How To Fix)

[@pranklord6191]

Thank you I’m so sick of these tutorials for pro tools from 20 fucking years ago. Glad to see it on the relevant template my god

[@MannyJamesMusicLife]

Thank you. I signed up for you 1 hour course. It been helpful and the template is dope but I still can't hear anything I recorded in Pro-Tools. Gonna shut it down and try again tomorrow.

[@1300rumrillrickey]

Great advice

[@tacitoak8078]

Bro thank you so much! I watched like 4 videos before this and you were the only one that made sense🙏

[@ernestfox4880]

Maybe I'm not asking this correctly...How do I create a mix for a peripheral output device? or HOW DO I MAKE THE SOUND GO TO MY HEADPHONES? 😫😢🤢😵🥺

[@SaintMesus]

26 seconds in and shook my head laughing cause I knew exactly what I did soon as you started to say it😂 appreciate the video👊

[@Dee.Huncho]

Does anyone know why my prefereces won't save? I am trying to enable "show insert assignment gain reduction meter" but it keeps unchecking itself? I'm running Pro Tools Artist 2024.3

[@quincymiller782]

Watched multiple videos but this is the one that worked, the resetting to default in I/O was what worked I think, then selecting the correct output on each track in the edit window. THANKS!!!!!!!

[@quincymiller782]

I had to do it in another project also. Same thing worked to fix it also. I noticed it was only the Bus tab that changed when i hit default. it added my audio interface. weird that it wasn't there originally hmm

[@davonriley]

Man thank you so much, this was really helpful.

[@_tradewinds]

Thank you, this helped me get my first session in pro tools going

[@chadfayrobinson7537]

All a sudden my xpand2 won’t sound but all other instruments play‽ any ideas‽‽‽‽?

[@marzdaniels7171]

Thank you, my brother. I was pulling out my hair trying to understand why I had no sound. I checked the I/O setting on the tracks they were routed to bus 1-2 I had to route to my interface instead and it worked. My man!

[@music_observe]

Can u use your keyboard as a midi controller for free in pro tools?

[@harveysoto]

Never appreciated this video before as much as I should have. This helped today, thank you!

[@MyAudioAcademy]

Let’s gooo! 😂 Happy to hear this Harvey. For me, anytime the audio isn’t working, this is the exact checklist I go through

[@mcgarvey-blair970]

Are use your set up to set up my recording template and it’s good, but now I want to do a proper mix

[@cantrn5937]

thank you so much! You go through the steps slow enough for a beginner to keep up

[@music_observe]

Do you need a midi controller for pro tools sounds to worl

[@MyAudioAcademy]

No

[@Alpha-jh4nq]

thank u bro , first tip was it for me 🔥🔥

[@OscarGonzalez-gy7li]

Still not working im like 3 seconds away from throwing all this shit away nobap💀💀💀

[@derycktaylor3677]

Your suggestions solved my problem. Thank you very much.

[@diamantblanc1559]

Merci tu m'a sauvé la vie ❤❤❤

[@msongs]

installed the free version. no wonder its free. no sound. also kills all sound on everything on my computer til I shut it down. then sound comes back. it offers two sound options windows and realtek and neither of them work and they both shut down all sound

[@ZeeXpanding333]

Thank you man for this video! Question thoughhhh, lets say I have over 15 tracks and that last step of changing the output on the track I had to do them all individually . but it worked thank you! Is there a way to do them all at once?

[@mymozy1]

hey is there any tips on how to fix doubles when i play it after recording there's some kind of delay it doesn't sound more powerful like I want it to be (HELP) any tips

[@simonvandesande2388]

Exactly what I needed, thank you very much!

[@DivineMaster-b4f]

Peace...Thanks..fixed my issue in 2 min!!!

[@sincereaubrey2227]

Ay man I connected up my icon g2 and I noticed that yes I still get signal but I've noticed when trying to record or listen back to the audio no matter if I turn off the low latency mode off or I re check the pariphals and I/0ive tried restart and updated drivers all that and it seems like the volume and play back jus isn't loud enough I have a m-audio duo track solo as the interface but I can't seem to see why my signal is so much lower-should I jus re sell this icon or what else am I doin wrong that I just am unaware of I've looked for videos and there's jus nothing I can find to help man could you possibly maybe do a video over this??plz man I need something to reset this problem but even looking on Google I jus can't seem to find the answers especially when it comes to the icon qcon g2

[@belikewaterson]

Thank you!

[@nayway9263]

Omg Thank you! Saved me 🤞🏽🙌

[@vega6880]

Dude! I really need your help, I can’t hear my audio no matter what I do. The beat plays fine but I can’t hear audio I recorded. Or my mic now for that matter, literally didn’t do anything between my last session & this one. It isn’t I/O, nothing is solo & nothing is muted. The track with my vocal & mic has the same audio output as my beat & I hear the beat fine. Protools actually isn’t even recognizing any other track other than the beat. Like there’s no sound being registered into the DAW. I have no clue what’s going on & it’s killing my inspiration / creativity. This is bs. Please help if you can.

[@Theonlytreal]

Same

[@stylesfreeman81]

didd you figure out solutono?

[@JJYoung]

Did you figure it out? I’m dealing with this right now. So frustrated

[@jamenskee2629]

I NEED HELP ASAP IDK WHY MY MIC KEEP CUTTING UP I ALREADY CHANGE THE CABLE AND IT STILL DOES IT AND DOES AT A SPECIFIC TIME LIKE EVERY 35 SECONDS SO I FIGURED OUT ITS NOT THE MIC OR THE CABLES I THINK IT GOT SOMETHING TO DO WITH PRO TOOLS

[@EmilioGutierrez-tl7bu]

I love you thank you

[@rafaelldenault7167]

i cant hear any of my tracks when i put my master fader please help urgent

[@kimerav]

Great video! But I just figured out for me it was a plugin on my Master fader that needed a license update. Check your plugins if this didn't fix it, guys!

[@jalog1169]

HELLO, do you know how to fix audio issue on AVID ProTools using volt 2 UA interface. It's so low I can't record vocals with it. Flat line. both inputs are like that. but when using headphone as mic it works. I/O SET UP right! playback engine choosing Volt 2 interface! I get flat line when recording help!!!

[@MyAudioAcademy]

There's a few things that come to mind. Let us know if these help 😎 1. Ensure Phantom Power (48v) is engaged 2. Give your inputs enough gain 3. Ensure your input is correctly selected (in your Pro Tools Window AND I/O Settings) 3. A common microphone people start with is a Shure SM7B. These mic's basically require a Cloudlifter to get clean signal (in case you've got one of these mic's)

[@jalog1169]

​@@MyAudioAcademy everything is hookup perfect just Microphone issue won't record although using A Headphones as Microphone works records great! Just don't understand how the headphones works & Records, But not the Microphone itself?

[@aydee4705]

Do a mastering tutorial

[@KeithRobTV]

Thank yoU!

[@speaklifestudio296]

We're sending this to all of our engineers now 😅🔥

[@MyAudioAcademy]

Sound will never be a problem again 😎

[@2473-l4b]

Bro Can you mix and master my song for me

[@dijahtrump694]

JAH BLESS ALL 🙌

[@dremketamina]

protools creator biting the curb 4k HD

[@dremketamina]

i love u u saved me from kllng myself

[@matteomatteo3781]

io mio odio per protools è alto come limpedenza del segnale strumentale

[@samkorte2938]

completely unhelpful

[@MyAudioAcademy]

Sorry Sam

[@moronoke]

dude f**k protools. I hate it.

[@2473-l4b]

Bro send my track on Instagram 2 you just a snippet