Those are not remnants of home made hydraulics. Those are remnants of the factory hydraulics. The tank and valve are the correct ones. All that's missing is the pump and hoses. That's a fuel pump, not a diaphragm fuel shut off. Originally they didn't have a sediment bowl on the tank, just at the fuel pump. Never run in firth gear off road.
@lohiacres465117 күн бұрын
That makes sense. I was confused the diaphragm pump as fuel shut off. Yes, the tank sediment bowl was a later addition. I wasn’t sure about the factory hydraulics. Happened to see a Farmall MD today and it has exactly the same tank, valves and has the missing hydraulic pump Thanks Ty for your valuable information
@very5ick11213 күн бұрын
yeah what he said : Never run in firth gear off road
@paulmurphy596416 күн бұрын
I see why you couldn’t resist. Nice seeing the parts new and old presented the way you did. Good job.
@gonerydin422521 күн бұрын
My Grand Dad had a W-9 when I was a small boy, 65 years ago. In the spring 3 men would take shifts plowing with it 24/7.
@lohiacres465121 күн бұрын
The guy I bought this from has almost the same story. Yes she is a beast
@virginiagraber907017 күн бұрын
WOW Nice. W-9 DAD Years ago, Awesome!!! Thank you. (Naaman ,Indiana)
@Patrick-xd8jv17 күн бұрын
We had a WD9 to pull a 5 bottom plow. For “fun” once, I hooked it up to a 22’ 480 disc and it pulled it fine, but slowly. Best to turn the steering wheel while rolling 😬
@timd534316 күн бұрын
luv them old girls
@rusttrail316 күн бұрын
What a gorgeous tractor, I love this, it's like a Farmall on steroids. 🤣
@wilmamcdermott306520 күн бұрын
I ran one of those thumb wreckers pulling a breaking plow was rough on the fingers at 8 years old. My dads was a WD9 super
@deweydodo669114 күн бұрын
Fuel pump bolt down on our tractor has a plate over. Gravity feed works just fine.
@user-fx5fz3pr5x19 күн бұрын
Nice to see her running!!
@charlesschulz841620 күн бұрын
We had International harvester company set up shop in Australia in 1912 making farm implements later tractors but also opposition company's like fordson, Massey Harris, nuffield, Massey Ferguson , Chamberlain tractors Australia the company was eventually bought out by John Deere
@mattthescrapwhisperer16 күн бұрын
New sub here. I'm an International/Farmall guy myself.
@gilreynolds928218 күн бұрын
Good job cleaning the carb
@brokenwrench116 күн бұрын
what does the large lever do that is to the right of the seat. IH had a W9R made for rice, a hand clutch was installed so the driver could stand up and clutch the tractor
@lohiacres465116 күн бұрын
That lever is for locking the brakes when parked. This one has foot clutch
@trevormitson602610 күн бұрын
You need to leave the subtitle/graphics on the screen longer.. Cheers 👍👍
@lohiacres465110 күн бұрын
Thanks. I have noticed it after the video is uploaded. Will keep a watch on this next time
@trevormitson60269 күн бұрын
@@lohiacres4651 Thanks 👍👍
@davidvogel635921 күн бұрын
what did the fluids look like, engine, transmission, rear end, radiator, gas tank? looks like it could be a good one.
@lohiacres465121 күн бұрын
Fluids are all looking good except the engine oil little murky. The gas tank sediment bowl had varnished gas, so needed some cleaning before the start
@wilmamcdermott306520 күн бұрын
Big enough to do most things on the farm back in its day
@jefferystrange747616 күн бұрын
Nice find and great clean up on those parts. What did you use?
@lohiacres465116 күн бұрын
Regular parts cleaner from Princess Auto. Can’t remember the brand
@wilmamcdermott306520 күн бұрын
Loved the case 932 i had
@lohiacres465120 күн бұрын
The one you see is case 931. She smokes a bit, but otherwise a good runner
@wilmamcdermott306519 күн бұрын
@@lohiacres4651 nice. I did sleeves pistons and heads on mine. 2000 hrs ago 2500 dollars
@lohiacres465119 күн бұрын
@@wilmamcdermott3065 I know, it’s not cheap to work on a tractor
@wilmamcdermott306519 күн бұрын
@@lohiacres4651 less expensive than johndeer . just did the engine on my old dozer D7c17a heads sleeves and pistons. 7000. I need it for fire fighting here in alberta after our communist leader set us on fire
@lohiacres465119 күн бұрын
@@wilmamcdermott3065I hear you. Coincidentally I have a Cat D7E 17A. She needs some tinkering
@jackmill423521 күн бұрын
That is not a home made hydraulic handle.
@lohiacres465121 күн бұрын
You are right. Those looks be all aftermarket items installed after the fact. Edit: Some forums says they are IH factory offered add ons. Not sure
@deweydodo669114 күн бұрын
They look like newer hydraulic parts off a 600/650