I FINALLY lowered my G80 M3... NOW it looks like a real M3

AST Lowering Springs: tinyurl.com/mr...
Impact socket set: amzn.to/3OXD6rJ
Impact gun: amzn.to/45wmqOT
Impact torx bits: amzn.to/3swzp4L
Impact allen bits: amzn.to/3YZe7Zm
Strut splitter tool: amzn.to/45QvC0l
Pass through sockets: amzn.to/3EjwQp3
Spring compressors: amzn.to/3QVU7Ff
External torx set: amzn.to/45AIJ67
G80 M3 Mods:
G8X M3/M4/M2 STRUT BAR tinyurl.com/3x...
AWE Track Exhaust: tinyurl.com/35...
Kies Hood Latch: tinyurl.com/mr...
AST Lowering Springs: tinyurl.com/mr...
G80/G82 MST Air Intake: tinyurl.com/2u...
G8X M3/M4 Sport Style Spoiler: tinyurl.com/mv...
G80 M3 Carbon Mirror Caps: tinyurl.com/yd...
Yellow DRL: tinyurl.com/58...
G80 M3 Carbon Mirror Canards: tinyurl.com/ms...
G8X M3/M4 DIFFUSER: tinyurl.com/4d...
G8X M3/M4 DIFFUSER SURROUND: tinyurl.com/3v...
G8X M3/M4 REAR SPLITTERS: tinyurl.com/mr...
G80 M3 SIDE SKIRTS: tinyurl.com/p7...
G80 M3 SIDE VENTS: tinyurl.com/4v...
G80 M3 FRONT LIP: tinyurl.com/ys...
G80 M3 CSL Grill: tinyurl.com/4w...
G80 M3 Air Duct: tinyurl.com/48...
Music by: www.epidemicso...
Burger Tuning: bit.ly/3eCzUkA
VRSF: www.vr-speed.c...
Instagram: @AyyyMan94
#bmw #g80 #m3 #ComissionsEarned

[@ItalianSauces]

Those are some real homies.

[@ayyyman_]

They honestly are

[@BobbyDigital_100]

For real. Even rolled through before work. Real 1’s

[@Xplict]

We appreciate you too Ayyyman 😁😁

[@ayyyman_]

Good friends > nice cars

[@chrisburry8147]

Looks great! I'm assuming you were rubbing before but if not, are you rubbing now? How's the ride comfort?

[@ayyyman_]

Yes, the 15mm spacers in the front were rubbing on the fender liners. They still run after the lowering springs so I might either cut the fender liners or switch to a smaller spacer in the front

[@chrisburry8147]

@@ayyyman_ thanks! Looks very good. I'm not sure if I want to the regular spring route or height adjustable (I have a 24 G80 xDrive). Do you find the ride a lot more harsh compared to stock?

[@ayyyman_]

@@chrisburry8147 in my opinion, it’s not too different than OEM. The height adjustable is nice but I think this ride height is perfect so I would t care for the adjustability. It’ll also be way more expensive and a little harder to install

[@chrisburry8147]

@@ayyyman_ thanks again, appreciate the content!

[@Blendedgrey_]

Bye bye front lip 😂

[@ayyyman_]

Ima enjoy it while I can 😅

[@anthonyboey3210]

Looks good. But the wheels are pretty much right under the fender edges. Looks like it will be rubbing the fender edges under hard cornering.

[@ayyyman_]

Thank you! So far it only rubs on the inner fender liner which I was doing before because of the 15mm spacer

[@Dogeyess]

Love the video

[@ayyyman_]

I appreciate you bro!

[@mjgarage1]

Great video bro

[@ayyyman_]

Thank you 🙏

[@mjgarage1]

@@ayyyman_ I really want to lower mine but I’m afraid I won’t like the ride. I live on a lot of country roads and some of the roads are really rough.

[@mohamadhassan4940]

Hey Ayman, what tint setup are you running on the G80? Do cops ever bother you for it (especially the tinted windshield)?

[@DJ_Wi_Fey]

You get any rubbing in the front now that your lowered with 15mm spacers and the Pirellis?

[@BobbyDigital_100]

Looks solid, man!

[@ayyyman_]

Thank you bro! 🙏

[@CarlosGonzalez-od5mf]

So you did NOT have to disconnect the axel?

[@MikeyyNYC]

Let’s gooo 😍😍🔥🔥

[@ayyyman_]

It was about time haha