I FIXED The Clone Trooper and Battle Droid Battlepack!!! | How to upgrade your battlepack!!

[@Boricua_User146]

I'm so tired to hear lego fans complain about helmet holes they are not even that bad.

[@CloneCommanderCrater1102]

Agreed. It's such a non-issue and yet Lego Star Wars fans are constantly complaining about them.

[@legogarythesnail]

Ong

[@omarbaba9892]

@@CloneCommanderCrater1102how? They make the helmets look so boxy and warp the print so the clones almost look deformed And the antenna looks comically high up and is really easy to knock out

[@CloneCommanderCrater1102]

@omarbaba9892 They neither make the helmet look boxy, nor do they warp the print. Sure, the rangefinder is a little high, but it's not that bad, and that issue is easily fixed by just getting one of the Clone Army Customs rangefinders (which are shorter than the Lego ones).

[@omarbaba9892]

⁠@@CloneCommanderCrater1102how not? It’s completely lost any of the shaping it had at the top of the helmet. And just compare the new 332nd helmet to the old one, the visor looks awkwardly placed and there’s massive gaps on the top of the helmet. It just doesn’t look good, and it clearly a lot of people think that given how quickly GCC helmets sell out

[@EternalDawn]

You can take 6 gray 1x1 studs and put the stud top into the holes left by the flick fire missiles to both remove the see through holes and make those joints look armored to resist disabling by small arms fire. :)

[@Boricua_User146]

When Mandalorians have holes in their helmets no one bat's an eye, but when clones have holes in their helmets everyone looses their minds!

[@spencerboerboom4043]

Do Mandalorians have molded spots for helmet holes under the actually holes? NO THEY DO NOT!!! That's why people don't like the clone ones

[@OhioSigmaCuh]

The hole is in a natural place in mandolorian helmets, but the holes in clone helmets look ugly since they are not located in their intended place.

[@VaughanTaylor-v4y]

Helmet holes are the absolute best, for me I just like being able to add accessories to clones.

[@Matt..S]

They are....*if* they did them as they do on Mando helmets or any other helmet. But they decided to put the canon ear attachment on, and then, literally on top of that, the hole. It should have been one hole like they do on the phase 1 helmets

[@Randomclone5464]

I am sick and tired of people complaining about the helmet holes. The fans asked Lego for it Lego gives it to them and they immediately start hating on it

[@Fishysalmon02]

If the holes were lower, it wouldn't work with visors or macros

[@omarbaba9892]

They should’ve just made new and better moulds. The visor is 15 years old and should probably get a revamp. The macro binoculars don’t even work with the phase 1 helmet anyway because they just flop around with no grip

[@Fishysalmon02]

@@omarbaba9892 idk what macros you got, but mine work perfectly. And the visors fit the cartoony lego style

[@VicFettOfficial]

If holes were lower then the range finders wouldn’t line up with the visor

[@Batmantheguardian25]

You can make commander thorn with a visor a Kama (waist cape) a mini gun and a backpack from the the 501st battle pack and a p2 shock trooper plus the main reason why the helmet holes are higher is because the normal holes with a visor covers the eyes of the helmet so that’s why the helmet holes are higher

[@NewFerrett]

If you didn't know the lego helmate holes sre accurate to commander cody, the minifigure they where made for. Great video just thought I should mention that

[@omarbaba9892]

They should’ve just made a new visor mould

[@Superdude4001]

​@@omarbaba9892average MandR fanboy

[@BillyBobFerguson]

​@@omarbaba9892 average MandR fanboy

[@omarbaba9892]

@@BillyBobFerguson what, because I have an opinion?

[@BillyBobFerguson]

@@omarbaba9892 yeah basically

[@Pnutbtrsprnkls]

Cool. Maybe I'll be able to use some of these builds when my local stores stock them in a few months

[@drew1427]

Im just gonna say it, in person the helmet holes are not nearly as bad as i thought theyd be. Its not that noticable, however i wish theyd just include some attachments.

[@DisturbedOne-47]

@BearsBricks great tip on the handlebars in this video! I used them on my AT-RT kits (75002 & 75280). Makes them look so much better. I also used them but in gray on the top turret on my AT-TE kit (75337). Great idea that makes the builds look so much better than the stupid bar. Thanks, can't wait to watch more of your videos.

[@Poison_Paradise]

ayo someone that doesnt hate MandR let's go

[@liamis199]

great video👍

[@Stanley_baker]

the speeder looks like a 4+ build and the original battle pack speeder looks better

[@JoeWuhPuh]

If the helmet holes were lower it wouldn't work with some of the accessories, in reality they should have extended the side bits up to match where the holes are now.

[@sinisterisrandom8537]

Solution to fix Set 75372 replace the post with lego set 7655 emplacement. Or design the one from 75372 to look closer to the original.

[@RK_Bohne]

At the back of the speeder you could have put a light grey republic box with a blaster inside

[@EternalDawn]

The box both perfectly fits AND makes sense for the speeders to be carrying for in field ressupplies!

[@snipershot6014]

I've gotten an extra tiny gun from 2 of those sets so you technically can just stuff it in with the grenade box and figure out where to put that box in the back of the speeder.

[@blade9657]

To be fair: Even if it looks better without attachments on, having holes at the place where people want it will make the attachments look so goofy on the clone because of the shape of the helmet itself and the printing. It just doesn't line up as people would think it would. It's really not that big of a deal anyways, if you don't like the holes then just grab those 2013-style clones instead.

[@ThomitoK]

The modifications are very good i like them very much

[@lIIllllIlllllIIIl]

The best speeder bikes were in set 7128. Lego seems to be cutting corners on some of these builds.

[@brickslingercoop9533]

Great job man

[@sethburke2626]

You missed the most important part of the speeder upgrade! You gotta flip around the fins. I think that’s a genuine mistake by Lego, every other speeder that uses those they’re flipped the other way. I thought it immediately made it less stumpy looking, and plus it just makes sense to have the point of the triangle pointed at the front for air resistance reasons.

[@eliasverbeek4892]

W upgrades

[@Legostarwars2.0]

I think they shuld of put 2 shock trooper and 2 basic ph2 clone trooper

[@pedroj234]

nice video

[@Nitrogamer_]

Haha minecraft waiting disc music playing in the background 😂

[@FreedominChristtheLord]

Fans should be complaining to get a Magnaguard Droid Battle Pack. LEGO is over due to upgrade all their droids. We need new molds. The Dark trooper feels n looks great. And it does toward over like the super battle droid. Its time they double the articulation in Lego minifigures.

[@RoostFN]

amazing mods

[@henryborba5921]

I'm so sick of the helmet hole complaint. If you are going to buy aftermarket parts why even buy the battle pack at all? It's pointless if you don't like the official lego version

[@spencerboerboom4043]

Because sometimes customs are better than Lego

[@Superdude4001]

Noice

[@Darthmiral]

The main problem with the holes are that they are misplaced

[@serventium4049]

and if they were in the right places, the accessories would be placed too low. The problem isn't the holes, it's the helmets.

[@h24manu]

Y'all always complained that clones like Crosshair or P2 Rex couldn't have an antenna attached to their helmets. Now it's possible and you're still complaining. Make up your damn minds

[@FreedominChristtheLord]

Lego really should UPGRADE the battle droid and super battle droid for new molds. Battle droid n super b droid should have a regular lego minifigure torso and legs like C3P0 n Dark Trooper. The battle droids feel like ur playing with sticks n they dont stand well. The Super battle Droids also feel cheap and overly tall. They even lack a backpack to mount their guns. A droideka would of gone a long way in this battle pack instead of a speeder bike. The best droid are Dookus body guards. The Magnuguard. The set would of been perfect. & even that droid needs an upgrade ane new mold. Lastly Lego should consider clones having articulating bending arms and legs or at least different arm n legs posing. China already has bend down postions minifigures.

[@bett_is_insane]

bro killed playability or the set 💀

[@babymanter0936]

GIVE ME THEM. GIVE ME THEM NOW. NOWAAAAWWWWW.

[@schreck1]

Its good enough as is stop complaining the helmet holes looks fine and your "upgrades" look worse than the actual set

[@kevinl6856]

3:40

[@Ibens_Inferno]

That turret design is ripped straight out of the Snowtrooper Battle Pack. Stop taking credit for a stolen design.

[@katesandoval9451]

It was good before 😡

[@cleb8700]

Where’s the difference