I Fixed The Langstroth Hive (Again) - Bee Barn 2.0 REVEAL!

Bee Barn BUILD SERIES PART 1:
• Bee Barn MAIN HIVE BOD...
This is my NEW and IMPROVED Bee Barn Hive. My bees lived in Version 1.0 for 2 whole seasons. They have have been living in V2.0 since the first week of October and they're all still doing great. Full "HOW TO BUILD SERIES" will follow over the next few weeks.
00:00 - Welcome, Friends!
01:23 - Video Breakdown, Build Montage
02:42 - Bee Barn 1.0 Was a Success for 2 Seasons
03:51 - What Is A Bee Barn? 4 Design Elements!
06:26 - Thoughts on INSULATION
08:15 - Thoughts on VENTILATION
09:42 - What Was Bee Barn 1.0's Big Problem?
13:00 - Changes to Version 2.0
16:27 - Solving the Condensation on the Inner Cover
17:30 - Sealing the Bottom of the Hives
22:03 - Making the Brood Area Larger
24:18 - Glass Observation Box
26:25 - Winter Outer Covers
29:15 - Opening a Hive on a Chilly Day
I AM ON INSTAGRAM: / vinofarm
SUPPORT THE CHANNEL...
FIND GEAR WE USE IN OUR AMAZON STORE!
www.amazon.com/shop/vinofarm?...
--------------
These are products I use and recommend. If you buy something using these links, I receive a small commission from Amazon. Thank you!
--------------
BEE GEAR I USE:
-----------------------
I GOT A NEW HAT!: amzn.to/3uCBp6T
MY SQUARE VEIL - amzn.to/3UyTRuu​
AWESOME MOUSE GUARDS - amzn.to/3eRKlR8
QUEEN MARKING PENS: amzn.to/2WMk3Us​
BEAR FENCE CHARGER: amzn.to/2IduxIt​
MARKAL PAINT STICKS - amzn.to/2TG55A8​
CAMERA GEAR I USE:
--------------------------
MAIN SHOOTER: amzn.to/2WHL3Eu​
MAIN LENS: amzn.to/2WQV8iF​
SECOND SHOOTER: amzn.to/2ayC2Zs​
SECOND LENS: amzn.to/2IaKbo1​
ACTION CAMERA: amzn.to/2Ifu5cw​
MICROPHONE: amzn.to/2FSMTvs​

[@vinofarm]

It's great to be back in the comments section! Keep them coming!

[@timothyodonnell8591]

I'm wondering if you're going to edit the videos to insert "Future Jim" to address some of the concerns raised in the comments (e.g. bees or mice chewing through the sides, the see through top becoming more opaque over time, the use of foam versus wood, etc).

[@vinofarm]

@@timothyodonnell8591 I have an even better idea! And I'm going to try it out pretty soon. I've had the idea and desire to do video responses to comments for years now, but I didn't want to flood my channel with short random videos of me answering questions. I like the idea of video replies because I can explain something on video in seconds, but it takes forever to type out a complicated idea. So I just started a second channel that will be a receptacle for shorts, news, behind the scenes, updates, extended clips, etc. Not so much a "dumping ground," but a lot less curated than this channel and all the videos will be one-take unedited type videos. KZbin Shorts is a perfect medium to reply to specific KZbin comments, so there will be a lot of that. So I'm going to be experimenting with that over the coming weeks.

[@timothyodonnell8591]

@@vinofarm That IS an even better and great idea! I look forward to the new channel and the shorts.

[@arcticbeekeeping]

We use poly boxes here I norway and the bees do not chew on the boxes. Ants can chew if the poly boxes are made out of a softer material. If we have softer boxes we use paint to stop chewing.

[@drrota]

@@vinofarmGreat idea - like the "beekeeping short and sweet podcast by the guy in the UK", Though sometimes he's long and sour" :)

[@FrederickDunn]

Hi Jim! It's nice to see you back and making more bee-related videos. It's always fun to see your innovations. Your barn and workshop are a dream come true. Your craftsmanship is always impeccable! Thanks for sharing, and I wish you a fantastic 2023 with your bees :) I'm absolutely with you on the venting, keep it up, we'll be watching :)

[@vinofarm]

Thanks for stopping by, Fred! The barn really is a dream. Happy New Year to you, as well!

[@FrederickDunn]

@@vinofarm Absolutely! I was getting a little worried when you weren't posting new content. Great update!

[@julieenslow5915]

Hello Fred - I've been away and I was away from my favorite content hope to be back in it this Spring! Happy New Year!

[@drrota]

Jim, For the sealed insulation term to replace the phrase "all in", it might be better to call it a "Diving bell" or a "Submarine with a bottom entrance". (or for those science nuts, an "upside-down Dewar flask".). :)

[@davidscottboring940]

Discovery and advancements never happen unless someone is willing to sail their ship out of the harbor. You are breaking new ground all the time! Your journey is exciting and keeps it fresh. Rock on, bro.

[@lawrenceweigel4000]

Decided to insulate my 2 hives, first year beekeeper. I basically built boxes of 2" insulation and 3/4" wood that go around my double deep hives. I did not insulate bottom but add 3/4 wood beneath to extend to edge of my insulated box. I then built new top covers with 4" of foam. They sit directly on my inner covers. We have been to -26° F with -65° wind-chill. So far I see live bees at the entrance on warmer days!

[@Palanthon]

I look forward to seeing your results in spring! Nice job!

[@joshbunker9855]

Was so excited to see you back! Thank you for sharing your journey. I really appreciate the openness with which you share your process.

[@Stumper52]

The one thing I have to say about styrofoam hives (made of extruded foam, not the ones made in moulds) is that bees love to chew the foam. While the problem is escalated if they see light through a crack, they will chew it no matter what to make more space. The most problematic area for this is 100% the entrance which I can see you've thought of. I hope you don't have too many problems with this. Also another problem with foam is that waxmoth larva love to chew it and make tunnels into it making it impossible to get rid of them. Where I'm from we don't have hive beetles (thank god) so no clue what those are like in foam. Also having no moisture absorbing material in the hive might be a problem in the late autum or winter. While the insulation will keep the temperature relatively stable the bees still won't keep the whole box warm in the middle of the winter. Hot moist air will raise from the cluster, cool as it touches the outer wall and condensation will form. While as you've said the bees need some water to drink during winter, I'd be more afraid of stuff growing on the walls. Remember bees ventilate during most of the year but when in cluster they don't so some moisture absorption might be better than none. The last thing about foam is you have to put a UV protective layer on it or it will degrade rapidly. I've made about 300 foam hives so far (30mm or 1 1/4 thick foam) so all of this is in good faith and from experience :) All that being said I really hope these hives work out for you :) Now for the solutions to these problems... while your upgrade from v1 to v2 did create better insulated hives I believe that the core hive of v1 is better for all the things I mentioned above. The main solution is a way to protect the foam from bees and waxmoth larvae as well as adding a moisture buffer. And this is also where I'm currently stuck with my foam hives. While making a sort of wood foam sandwitch like in v1 works it takes a lot of material. I'd much prefer a solution that can be applied to the foam and form a strong coat, be cheap and non toxic to bees...

[@twc9000]

Have you come up with a solution yet? The only thing I can think of is to line the interior with thin plywood, but if it's too thin (1/8" or 1/4") it might warp, and it will add more weight and complexity.

[@hot_tunas]

Realistically we have 3 options, wood, plastic or metal. Each of the 3 have pros and cons but I do think you need to protect the inside and outside of the foam from the bees and other wildlife. Moisture wise you could always set up the top part to absorb it with cloth or something during winter(which I feel would cause the most issues as the bees are inactive). So a plastic sandwich could work in that case, but then you have to worry about warping and damage from the sun. Wood has similar issues from getting damp but it might be easier to manage with a coat of paint or oil layer as protection. Metal has the issue of absorbing to much heat from the sun, so I feel like that wouldn't be that good for the bees, but maybe a plastic/metal or wood/metal hybrid protective layer may work too. It would provide much more protection from wildlife. Honestly though I'm not to sure what would be the best option, even if you took the cost of it all out of it.

[@MarianneSandy-wo8yh]

I followed his directions and took a standard hive and covered it with 2" foam, bottom, sides, front, back. I had coreplast and put that over the foam and screwed it in using 3" screws. It worked well. Since the coreplast is corregated, I caulked the top and the bottom and any areas where there was an opening. I took self adhesive vinyl wall paper and covered the bottom, and 1/2 way up the walls. I did the same for the top down. There are no holes or openings. Lets see how this works out. My first hive I have to add the caulk and the vinyl self adhesive wall paper. Of course the wallpaper was pretty with flowers. I know, I know, bees don't care about what the hive looks like. But........I do and sometimes i get carried away. 🙂 Lets see how they do this winter. I wouldn't use the coreplast again though. Home Depot has a thin plastic sheet that might work out better. Or maybe just self stick vinyl wall paper.

[@joshuapluim]

So Excited for the how-to series! Thank you, Jim, for all the work you've done. Well worth the wait :)

[@whoppingliar5100]

Fantastic stuff! Good to have you back.

[@julieenslow5915]

Welcome back! You have been missed on KZbin. So excited with V2.0 and what is coming. I'll save my thoughts until after all four videos - if I can control myself. Be well Jim!

[@drrota]

Julie, If you are a "maker", just start building, and experimenting. With insulation (vs wood), its a lot simpler. And instead off plexiglass tops, I've seen people use thick sheets of plastic.

[@Stagixx]

I missed the bees. Crazy how long this journey has been ^^ I was fresh out of school when all of this started. Now the bees have their luxury panorama roof villa and I'm still working to get my two room flat XD

[@66miller]

Awesome you are coming out with the videos in time to build for spring 2023. Thanks!

[@Sandybar15]

Great to see you back. Been watching your build on the gram. Love the hive updates the bees are happy. ❤

[@jkdniel]

Can’t wait to see how the new bee barns work out.

[@drrota]

I love the air gap in the winter top !!! Awesome (a Yurt-like idea). I've built two Barn Hives 1.0+ versions (waiting for deploy in 2023) with some similar changes to the bottom board - sealed, but no screen, solid. I will likely add a drain wick (post build - like they use in masonry). I expect to build 2 more before bee season) (I like how you did that - great idea). One thing about outer skins of just insulation - and ant's - you've said you don't have a lot of ant problems, but once they get into the insulation, it becomes a tunneling project for them, and they will build a home in there. Just like under your bottom insulation. (good idea with chloroplast under your hives too) Be prepared - once there's food in your yard and a warm place to stay - the ants will seize on that opportunity and eventually you'll have a lot more ant colonies around your bee yard. (been there, had that). Just like bees, ants, (and mice too) can smell food, and they unfortunately can operate in colder weather than bees. Might be worth considering some other outer shield method for the insulation, other than just 2 coats of paint. I've used insulation before and have had mice and ants tunnel. There might be a type of paint that is insect resistant (but not an insecticide). "Haint blue" or "dirt dauber blue" that may add copper-in-the-paint or something. Keep up the great work - Looking forward to chatting w/you again. --- Your easterly neighbor 20 miles away. ...Don...

[@melissabeers35]

I've been waiting what feels like forever for this video! So excited!

[@thehturt5480]

You seem to be like a pioneer on this field. People like You are pushing the envelop and so leading to new discoveries. These being said I will stick to my wooden hives for some reasons.

[@vinofarm]

Cool. Thanks. I’m sharing what works for me. If it inspires people to try something new, I’m happy. Maybe someone else gets an idea from me and takes this to another level. I just like sharing.

[@SurlyPlatypus]

Love seeing you Jim. Enjoy your Bee Spring!!

[@gwynmorris5852]

So interesting - love this. The way you reason out the design is fantastic. Thank you.

[@jpb4676]

Hey Jim, spot on regarding ventilation. I have been sliding a polyisocyanurate "sleeve" over my winter colonies for several years (in Connecticut). They are completely insulated top and bottom as well. There is just a short 1 1/2" (diameter) piece of pvc as the entrance. I make a top out of the poly as well, replacing the telescoping lid. So, no drafts at all. I have not seen any problems with moisture, and they use less resources throughout the winter. Awesome and inspiring to see what you are working on!

[@vinofarm]

This is the way.

[@MinnesotaBeekeeper]

The huge problem with polyisocyanurate in northern climates is the foaming agent which starts to fail at 50 F thus losing it's insulation properties. I'm continually taken back that more people don't know that. Great for southern keepers in hot weather...

[@jpb4676]

@@MinnesotaBeekeeper Will research that, but I have been using the same "sleeves" for seven years now, with no issues. Bees have been fine.

[@jpb4676]

I found the info on polyiso below 50, but so far I have had great results with it. May try a different insulation for additional colonies going forward. Thanks for the heads up.

[@brucesison5474]

Nicely done Jim. Your dedication to changing the bee keeping game is inspiring.

[@vinofarm]

Thanks 👍

[@pastormickallen]

Thanks so much. Great design! Can’t wait for the next videos!

[@neilsmall6518]

It great to see your back. I have been working on a hive to work in the Caribbean. You have given me some ideas

[@sirwinstonhoneybees1376]

Well, this is very exciting, especially since I don't have a huge trove of woodworking tools at my disposal. I wonder if you'll also have specs for your nucs? Glad you've been watching the Mandalorian during your down time! Question also about propolis or burr comb on the plexiglass?

[@WL7NI]

I am looking forward to see your results this spring. With the version I made off your 1.0 design last year I did notice that the bees chewed into the polystyrene board I used as the follower. Not sure if yours did that too. At the end of the season last year, I thought I lost my colony as I never saw the queen again and there was no brood in the frame. We had a cold, rainy fall so I didn’t disturb the colony after I harvested my honey. I peeked inside in October before our temps dropped consistently below freezing and found there was still a large number of bees in the hive. They took feed up until the third week of October., at which point I filled up my top cover with insulation and haven’t looked again. I have a temperature / humidity sensor up in the lid, essentially in their “attic”, above the inner cover. Even when we had temps below zero, or single digits (F) they have kept that space at almost 40 F. It hasn’t mattered if it is 30F outside or 5F, the temps stay within about a ten degree range. I did see it dip to 30F at one point and was concerned they were done. The next day they had it up to almost 50. The temps rise when the humidity rises. My guess that is when they are working to increase the temp in the hive and respirate more. The humidity inside the hive is completely independent of the humidity outside. It won’t be looking inside the hive until we get a 40 degree day in March. If they make it, this will be my first successful overwinter. I am guessing you will have great success. I may adapt my hive to the plexiglass inner cover too. That seems like a great way to check on them without completely exposing them to the cold. Keep it up!

[@drrota]

The softer follower boards do that. I'm *sure* Jim has solved that already.

[@pattiott4871]

Thank you so much for sharing your ingenuity

[@jonahbrame7874]

I have been anxiously awaiting your evolution of the bee barn, and I've gotta say, you did not disappoint! The clear lid is game changer, as is pretty much everything about it. You are right; this is the way!

[@timhuffman6970]

Welcome back. Not sure you'll ever see this comment in the sea of comments, but maybe others will read and comment. Please understand that I love your creativity and experimentation, and I hope you keep it up. I'm an Alaskan beekeeper, so I'm very familiar with the benefits of insulation, and I've also experimented with plexiglass inner covers. As several others have pointed out, I hope that is high density foam you're using. If it's standard foam insulation for human houses, they'll destroy it in no time flat. My first year I built a nuc out of 2" foam, and it was ruined in less than a week. If I put foam in a hive now (say, a follower board), I cover it with packing tape to prevent chewing. That wouldn't work with a box, because it would also inhibit propolis deposits, which are important to colony health. I've also experimented with plexiglass inner covers. I loved them for the first season, but over a multiple seasons the wax and propolis deposits significantly reduce visibility. You could still estimate cluster size, but could not determine if a frame had capped syrup/honey or not. My attempts to clean them only scratched them up, but maybe you can figure out something I couldn't. Finally, your upper entrance, (overhead) ventilation, and inner cover observations are spot on. It may not matter much in warmer places, but in Alaska, helping colonies retain heat is critical to overwintering. After some experimentation, I only use Reflectix as an inner cover. It's easy to peel off, even then the bees are doing their best to glue it down. It also forms a great gasket for the top box (in winter, it's filled with insulation) and/or outer cover.

[@vinofarm]

Inner boxes are super dense poly hives. Not regular foam. You'll see in the build videos. Thanks for the thoughtful comment.

[@mike_carvalho]

​@@vinofarm Aha! I found it. You're using the Lyson 8/9 Deep (Polystyrene) Hive Body! I was wondering how you had built those frame rests.

[@vinofarm]

@@mike_carvalho 100 Internet points for you. You'll hear all about them in the video on Tuesday.

[@drrota]

@tim, My guess, if you have extra plexiglass covers, you can swap them out and use boiling water to melt off most of the propolis, and wax.

[@mtnmyke]

I'm curious to hear how you like the Styrofoam. I've heard from some Alaskan keepers that they can easily be damaged when cracking the boxes apart or pressing against the sides to center frames, etc. , since they obviously give where wood doesn't. But I love what you're doing. Although it wouldn't work for my goals and climate, I think you're definitely onto something for your area and goals! Excited to hear how things go in the future.

[@blaahster]

It looks like the rim, is protected by that black hard plastic, should last many years of use

[@IndyCarJoe]

Good to see you back, Jim

[@JenniferTacbas]

Welcome back to our favorite bee keeper! So excited to see what’s new.

[@nikolaasp2968]

5:36 There are several types of Layens hives, the most commonly known is horizontal but vertical Layens hives with supers do exist and have been around for a while, they are called Layens pastorale and Layens divisible. These hives were very common in the past and are still used in some regions of Europe today and I know that in the cold regions of France these hives used to be insulated with a thick layer of straw or reeds on the outside.

[@vinofarm]

I was not aware of that. Are they all the typical Layens sized frames?

[@nikolaasp2968]

​@@vinofarm Yes, the Layens Pastorale is composed of a body containing 9 or 10 typical Layens sized frames, and the supers uses 8 or 9 half-sized layens frames. As for the Layens Divisible it is basically made of Pastoral supers so it is intended to use half-sized layens frames but it is possible to put full sized layens frames in two stacked Layens supers.

[@vinofarm]

@@nikolaasp2968 I know a lot of people look at my frames and immediately compare them to Layens frames, but mine are actually about 50% larger. My observation with how the queens are using my frames is that bigger is better for them. Also, bigger frames means fewer frames for the beekeeper to worry about. Fewer frames to pull during inspections, etc. It’s interesting to hear about hives I never knew about and it’s common for people to seek similarities and make comparisons, but I am very happy with what I’ve built. It’s basically an extra deep Langstroth hive. And from what I’ve read about Langstroth, the design is closer to what Langstroth envisioned and built than the typical “Langstroth” thin hives that are used today.

[@jvin248]

Looks really good! Lots of well thought out Ideas. The strap ratchet seems fiddly, how about affixing your strap around the bottom half of the barn and put two D-rings just below the upper lid so you don't need to chase the lower ends, then swing the free end over the top and cinch tight with the D-rings (I'm sure you've seen pants belts made this way). Velcro would get debris stuck to it over time. Integrate your strap foam protectors to the lids.Can the rear tray door be attached to the tray so it doesn't get lost (washers and bolts and/or exterior-grade tape)? How about a wide apron strip of the black sheeting on the stand under the bee entrance slot to keep mice from climbing up the wood base? A couple of tweaks. Looking forward to seeing the build.

[@gregmckay666]

Maybe even a couple of bunjee cords and D-rings would do the trick?

[@lowjkelvin9025]

Happy new year! Greetings from Singapore. Your barn/workshop looks beautiful.

[@ProjectHomeGrown]

Very very well done, I am a big fan of your ingenuity!

[@teachbearcop]

24:00 how does the lip of the polystyrene foam hold up to the weight of the frames? Do you think it will need to be reinforced?

[@HostileTakeover2]

I wondered the same thing. You could trim a little of the foam and add a thin wood frame on top that will help distribute the pressure and maintain rigidity while not adding much overall weight.

[@metooplease9636]

It is so good to see someone working to fix issues instead of falling back on "That's how everyone does it, so it must be the best way". There will always be push pack from people who don't like change, but you're seeing positive results. Keep up the good work.

[@lordmike1627]

i have the same polystyrene boxes he's using and they already work perfect on their own without a million modifications lol

[@michaelbohlsen2760]

Thank you Jim for all your hard work and your dedication to Beekeeping.

[@jdvanallen2907]

I have been looking forward to this video since you learned about the condensation issue. I was about to start building my version back when you announced that this was going to be coming. I finally have time to sit down and watch your videos before building mine!

[@theworldoftrading4592]

After 150 years, someone finally improved on the basic Langstroth for those of us in colder climates. Nice work Sir! I look forward to building them 🙂

[@georgetaylor9154]

and what exactly was their to fix about it??

[@AllanGyllingOlsen]

Remenber, if the bees have a lot of pollen/food when they come out in the spring, they Will swarm for sure. Keep Them “hungry” and they Will swarm less

[@Matty88K]

Or maybe do splits and naturally increase the number of hives in your aviary (if you have the room).

[@emk7132]

I am soooo excited!! Can’t wait for the tutorial series!

[@merpenbeck]

Great redesign! I'm definitely copying this design in Chicago this spring. Keep innovating!

[@dan.vitale]

Superb Jim. Love the passion, dedication and creativity. The new barn is amazing. That plexiglass is super satisfying!!

[@BugFarmerBees]

Incredible job. I can see the amount of thought you have put into this design. This is a game changer for all bees, not just the northern ones. You have created a beehive that mimics their natural environment based on empirical evidence. They will feel safe and secure which should translate into healthier more productive hives. I know the bees are happy as was evident by the 20,000 smiling little bee faces looking up at us when you showed us the inspect-ability at the end on a 40F day. No Cluster, imagine that :-). That is exactly the way my bees behave in their heated hives, they mill around and use fewer resources. You have created the same outcome without heaters. Your bees resource consumption will be cut in half. It's great to have you back in the game. You always have so much to offer and I cant wait to see the frames. P.S. I am extremely jealous of your shop. Two thumbs up!

[@TheRainHarvester]

Heated? Nice idea! What region are you in? Would these get too hot in central Texas?

[@vinofarm]

Woo woo. Thanks, @bugfarmerbees

[@BugFarmerBees]

@@TheRainHarvester I am in Georgia. Forgive for hocking my channel Jim :-) www.youtube.com/@BugFarmerBees That in mind, with Jim's new design heaters are obsolete(ish).

[@rtxhoneybees]

I am in Central Texas and I believe they would actually benefit the bees in July and August because it would cut down on heat gain (both solar and thermal) an would preserve more of the overnight cooling. I would, however give them some ventilation opportunity for the 100 degree days.

[@TheRainHarvester]

@@rtxhoneybees my friends bees beard at 1am in summer. I think the insulation might harm at that time.

[@cochechohoneybees1060]

I really enjoyed watching the build of Bee Barn 1.0 and your reasoning for building these insulated hives. I'm looking forward to the series on Bee Barn 2.0. Thank you Jim

[@Joseph-Colin-EXP]

Good to see you again Jim. I checked back a few times over a couple months, glad to see you're abck at it. No doubt these vids take time to edit and compile.

[@feirmebeardonn4597]

Built my bee barn last winter, put bees in it in early April. Right now we have had weeks of 20F with 30-50 MPH winds followed by inches of rain and wind. I put my ears up to the hive and you can just hear the hum of the bees, they are just hanging out waiting for a nicer day. From my hive to yours, thank you for all your insights and help.

[@broodminder]

Very nice work Jim. I've used clear inner covers for years and I love being able to look in (and show off my bees) without disturbing them.

[@vinofarm]

It's the BEST thing!

[@supportourmilitary4768]

Hearhly Happy and Strong Bees We All Need.Amazing work.

[@blaineparker8733]

Jim, phenomenal design, thanks for sharing, truly out of the wooden box frame of mind 🧐

[@tjjastrem127]

Very cool Jim. Love how you are pushing the envelope and preconceived notions

[@clarkkent7973]

Your bee barn design is so successful that you had to make them bigger/wider. Wow! You have come so far from the single deep box over winter. Great video!

[@spencerpeters8921]

Thank you for coming back!

[@vinofarm]

I never left! I've just been busy.

[@johnbush3610]

Looking forward to the build out videos. I've got some ideas but I'm interested in your thoughts on installing bees from my existing hives.

[@tc9459]

Jim!! So glad your back!! I can’t tell you how happy I am that your back in my beekeeping life, I definitely need some motivation in that part of my life. I’ve changed a lot of my thoughts on beekeeping and I feel like your one of the KZbin beekeepers that I enjoy most in thoughts and entertainment.

[@sirnearlyheadlesnick]

As a Newbie to Bee Keeping, assisting a fellow Bee Keeper now going on my 3rd Season ( Im based In South Africa Season is +-(Nov -April). I Came across your Bee Barn Philosopy and after extensive deep dive of reading all the Theories, Your Bee Barn Resonates with me, and your Data proves its self Right. Looking forward to your Build Video Tutorials to commit to Building my own very first Bee Hive/ Barn in the Coming Weeks. Thank you for sharing your journey and look forwards to collecting my own observations to grow and share your philosophies & |Theories. 👍🏼

[@chrrmin1979]

Happy new year! Glad to see you're back!!

[@hisimagenme]

I'm not shocked at all!! I knew you were brewing up a new hive and it would bee worth it! I still want to see all you've done in YOUR barn though!! Go Vino bee's!! See you in the spring! Smiles and blessings...

[@InsideTheHiveTV]

Yes!!! Insulation is key! Bees completely take care of themselves with FULL insulation!!

[@Robertsons4848]

From flow hive to a Langston replacement. This channel is someone going from an interest to doctoral level understanding of the bee keeping. Welcome back and I'm glad you are back!!

[@vinofarm]

Very sweet, but I’m nowhere near doctoral level understanding of bees. Just observing and following what they tell me.

[@trishapellis]

@@vinofarm I mean if you look at doctoral theses and what goes into them... it's observation, hypothesis, experimentation, and confirmation or rejection of the hypothesis. That's exactly what you're doing. The bees die in winter. The signs show that it may have been cold, may have been hunger, may have been both. The comments also suggested some possible causes at the time (like the cluster being so small they could only warm up a bit of honey above them to eat, they can't move sideways because of the cold). After a lot of thinking about our observations and possible hypotheses to draw from them, we follow the hypothesis that the cold is key and insulate the beehive - experimentation. Next winter, the bees survive better than ever - observation done, hypothesis confirmed, problem solved. (I also love the little tidbit that they plugged up the vent hole and you just went "Okay, no vent hole then") But now there's moisture. Hypothesis: the top cover isn't insulated enough, draws the cold in, and that causes condensation. Experiment: attach some foam to some of the nucs to see how well it survives the weather to make sure we can use it for the whole hive design. Observation: The foam is fine, so we build the new hive, and we put the bees through another winter... bees are better than ever. Observation complete, hypothesis confirmed, problem solved. How many times will you go through this process before accepting that what you're doing is definitely worth some kind of academic merit? 😉

[@vinofarm]

@@trishapellis Now that you mention it… ha ha! You make great points.

[@DM-wb4jv]

Love watching smaller keepers like myself finding ways of battling our northern winters. Took some tips from bee barn 1.0 with some changes and been working great this winter. We had a bit of warm up in southern ont. and they were out flying and a higher population than normal! Missed the videos .

[@jarmanley4605]

love your videos, as a new bee keeper i try to incorporate what i can from these videos.

[@twistin140]

Very cool! i started watching you when you brought home the 2 hives from your neighbor. I knew then you cared for the bees and the things you did for them. This is just above and beyond. Are we going to see a bee dance again? Glad to have you back, you were missed! GO BALBOA!! (if you cant tell I love how that hive survives.)

[@tommullarkey7372]

As a double deep beekeeper in Western Mass, my back and I are really looking forward to your upcoming videos - i'm ready to build some Bee Barns. Congratulations and kudos for thinking outside the box and for being so generous with your thoughts and ideas.

[@movieswithshannon]

Good to see ya back i have missed your content. sadly i am allergic to bees so this is as close as i can get to them without needing to go to the hospital. so thank you for that!

[@jasonnull2248]

Love it. I’m glued to my seat…

[@Enkrod]

You gotta respect the amount of work going into this, not just the bee barns, but the videos too, scripting, filming, cutting and production is a hassle. And Jim could easily just keep all his ideas and solutions to himself, maybe capitalize on it by selling educational videos or stuff like that, but he's obviously dedicated to sharing, open-sourcing the bee barns and advancing bee-keeping as a whole. And you can still capitalize on some of those things by offering convenience, don't want to build your own frames? Maybe buy them from Vino Farm. Need hints on where to buy some stuff? Vino Farm has affiliate links. That way you don't need to pay Jim, you can do everything he does and he'll tell you how in a number of well produced and easy to follow videos, but the option to make your life easier and send some money towards the person who shared his ideas is always there.

[@vinofarm]

This is very sweet, but just watching the videos is really awesome and always appreciated. Next best thing is SHARING them. I'm just happy you're all here! Thank you.

[@bethechange4173]

Not me with the biggest smile on my face the entire time I was watching this. We’ve so missed you the past 6 months!

[@jeffhamilton8641]

Great job looking forward to next videos so I can build mine

[@robertmathurin739]

Was Patient waiting too See what You Had in store for Us My Friend,,, All the Best For the New Year,,🇱🇨👊🏼👍🏼♥️

[@dalefgrooms1812]

WOW! I love it! Great work

[@simonwinstanley1105]

Fantastic Jim!

[@shemwayman1146]

I HAVE BEEN WATCHING YOUR PROGRESSION, I THINK YOU ARE ON THE RIGHT PATH, MAKES LOTS OF SENSE.

[@bradgoliphant]

Hey Vino! Great job. Wow!!! We all know by now that these pine boxes we keep bees in needed an upgraded decades ago. So well done. I’m a firm believer in double-deep frames, as well as no upper entrances. Bees will tell you they only need one bottom entrance. And speaking of helping the bees regulate temps and humidity-I just learned about the HiveGate. Great job.

[@louiseallen355]

very exciting!!! thank you and welcome back

[@point305]

Can't wait for next week's series 2.0 review do it yourself! Jim nice having you back in social media KZbin. You are truly missed! 🐝🐝🐝

[@graemediesel2936]

You have a lot of good ideas here. I am probably steal some of them to redesign the wraps I build for my beehives. 😀

[@vinofarm]

That’s the idea!

[@robertling9872]

Thank you for sharing you information and video's.

[@billb.2673]

Hey Jim. Great to see you in action again. We were out near Red Apple Farm and I realized it's been a while since I've seen one of your videos. Really missed the content and glad to see you're "ok". Kudos for recognizing the potential thermal bridge issue and creating the air pocket, effectively making a thermal break.

[@seeyouonthemountainbeekeeping]

You are the bee barn champ brother! Thank you for your great work!!

[@Boise30]

Hell yeah brother! Thanks for your hard work and sharing.

[@framcesmoore]

Great job thanks for sharing this I cant afford to buy new hives but its got me thinking how to insulate my hives in a better way it is going to be great seeing the other videos have a blessed day

[@nickford5549]

Love it! Cause of your videos I’ve been working on a design for something similar. I settled on a layens size in a lang config

[@vinofarm]

Cool! I’m hoping people get creative. The goal is happy, living bees and less work for the beekeeper. I can’t wait to see what people come up with.

[@honeybeesinjapan]

Wow Jim! What a wonderful design. My name is also James/ Jim. I'm a beekeeper in Japan. I have just started to make all of my own equipment including the frames mostly because of the cost of equipment here in Japan. I can't wait to watch your construction videos for BB 2.0. I WILL be making them for my bees. I'm also really excited about your usage of polystyrene. That is so much cheaper than wood but still keeps the bees warm and happy. Thanks for sharing! God bless!

[@bgdddddd]

Happy new Year great to see you 2.0 box see hou next week!

[@RusticByNature]

very nice, I am up in Alaska. I am looking forward to seeing how they do this year.

[@Littleraptorland]

I’m super excited for your future videos and how to. I’m so happy to have you back. I am only concerned about the bees chewing the foam as I know they might please enlighten me.

[@Digger927]

Lol, every vented structure I have ever put on a hive, the bees always plug them over with propolis. Design looks good Jim, glad to see you back.

[@davidrichards4304]

Welcome back have missed you, happy new year

[@curzon176]

i love your ingenuity dude, welcome back.

[@driftingsoulsisters]

So glad to see you back!!

[@bwigren]

Awesome update, thank you. Can't wait to see the next 4 videos, and how these hives do over the winter. Would love to see how you feed with these hives, and looking forward to watching you add honey supers in the spring. Are the honey supers insulated too? Thank you for sharing your lessons and insights, very helpful!

[@vinofarm]

Just wooden supers like the old bee barns. No need to insulate the supers.

[@bmbirdsong]

30:48 Unexpected Mandalorian reference! Loved the video. Can't wait for more!

[@MCCRITTERS]

Welcome back and Happy New Year to you!

[@skyhighactiondrones5453]

Fantastic video

[@beesandtractors]

Glad you're back Jim and nicely done! I'm looking forward to the next videos. You really seem to have covered everything and your attention to detail really shows. Thanks and welcome back!

[@StephenBiggers]

Nice to hear that the hives survived and had brood early; would liked to see you keep an old hive to compare.

[@tonybaker1295]

I was only thinking the other day that I hadn't seen you for a while. Glad your back.

[@CrazyIvan865]

Wonderful. People say I don't know what I'm talking about. But replicating a natural environment as much as possible usually tends to work out better. Glad to hear it.