I Fully REPOWERED My BOAT!!! (TWIN 200 SUZUKI'S - Repower and Fishing)

[@BashSchroeder]

Clearly the business is doing well, man I love watchin hard workin people do well in life.

[@pqtpat7734]

Solid young mechanics

[@gkny4045]

You’ve gotta love it. There’s hope

[@nischalgosyne8916]

Use a tubing to divert the water from the rod holders

[@tombrown7577]

Looking good Captain! Now go have some fun and catch some fish. I love the sound of wide open throttles.

[@brianvoong7651]

Always enjoy opening KZbin and seeing a new Movin Weight video

[@robertbrander2074]

A LOT of Happy Boys on that boat ! ..... Movin Up and Movin Fish ! ... Cheers !

[@tannermontana93]

I'd be stoked with twin engines getting 2mpg cruising at 30mph

[@RudySegura-t7o]

You are the captain great job

[@TheMotorick]

Hugely entertaining! Thanks for taking us along.

[@tonyv9712]

You made a good choice. Those motor sip gas and reliability at it's finest

[@ericlarson3629]

HECK YEAH ADAM!!

[@offshoreandoutdoors]

Pcy installed my 350, with a power assist, GO check to make sure they installed a 50 amp inline fuse, they didnt on mine and when the pump caught fire it almost burnt my boat down 12miles out. Go Check for a 50amp inline fuse. Plus dometic makees an awesome autopilot pump that mates to the side of the pa pump, elimates extra hoses.

[@thisismov]

sharks are out of control. loving the new zukes

[@sd-pv6it]

Here is an idea, get some big flex tubing and clamp them to the bottom of the rod holders leading to the bilge so they do not get all those pumps wet.

[@kevinpaskovich406]

Lmao i commented what i said then just read this great minds think alike

[@adammcgeorge3538]

Nice work taking the boys out for a fish, the boat looks great and everything was done right by professionals, enjoy that new motor smell ;)

[@tyleralbertfishing]

Lucky dogs gettin to go out fishing for kings with Movin weight!

[@Dink_master_fishing]

That is awesome that will really help with charters and commercial fishing time wise

[@BucktailBilly]

Your boat is friken amazing man🤙

[@ryanlory9193]

Looking good brother. I called my Suzuki dealer getting all info this week. Will be repowering over winter with the same 200s possibly fly by wire. Going to be amazing on the 261 mako!

[@gradybrowning3976]

Congratulations on the repower, sure it will save you on fuel and make the ride a lot better!

[@TheJimCarroll]

Couple suggestions. Run n2k network from engines to mfd and switch batteries to lithium and save some weight. You'll be able to control autopilot from mfd and overlay gages on mfd. I run ionic lithium on my boat. Saved tons of weight.

[@valhallabjj1032]

looking for the same, if you dont mind what did it set you back ?

[@MaeMae11]

Google

[@joster120]

Your a beast my brother! Keep up the work!

[@sterlinghousewashpressurew9594]

Can you run tubing off the bottom of the rod holders into the bilage

[@MovinWeightFishing]

yes i did

[@Grady252]

Nice repower. Did you ever get some performance numbers like top end trimmed out and full RPM? What boat is that and estimate weight? I would like to repower my boat with these motors, but just not sure if I will get the same performance I have today from my 2 strokes.

[@Zwarte-Piet]

Nice Guys! Whats the brand of that Engine Jack Plate?

[@kevinpaskovich406]

Weird idea i may have smoked a little something funky this morning while watching this but if you ran like a short tube off the bottom the rod holder into the bilge to get rid of the water, kinda ghetto but definetly works to move water away from the pump.

[@noahisaacson4991]

When’s the merch coming back?

[@jillian8485]

DUDE SET UP IS PHENOMENAL bro love it i cant wait to visit juipter this summer and hopefully you can take me and my girl out on charter if ur available i would love to catch snapper or grouper what ever really lemme know thanks

[@larrycarr6545]

What happened to that catamaran that lost its bow coming back from the Bahamas?

[@thaisoverthehill]

Sweet job! We'll worth it

[@ibyisabeast]

What reels are those ?

[@roberthorniacek4559]

Nice upgrades.

[@robertandrews4382]

Those guys have more patience than me I can't stand someone looking over my shoulder and asking questions when I'm trying to work on something lol!!! I'm sorry I would have run you guys off they deserve a fishing trip for sure for staying that calm! I can do alot of cussing while working. Hope you love those engines

[@eriklarson9137]

Well then let today be known as the day you figured out everyone isn't just like you.

[@marcusfishtanks7395]

@@eriklarson9137 yup nothing wrong with asking questions

[@cesaryamamoto4734]

Put some 1/4 hose on the rod holders over the power assist pump so it’s not dripping directly on the pump

[@aaronveikley1454]

Hell yeah. Get some toroidal props for that bad boy!

[@lesmize8932]

Nice work

[@JWnFlorida]

Tax man needs to be taxed 😂😂😂😂😂

[@johnkowley9314]

Very nice !!!!!!

[@mackmusial6214]

You should head mount the camera and get us some pov fishing.

[@georgeniebergall7074]

How many miles did you have to go out to catch these fish?

[@ultimatejay]

how do you see debris in the water at night when your heading back in like that?

[@Al-oe8ib]

You dont unless you have Flir and watching it constantly

[@ultimatejay]

@@Al-oe8ib that is really risky, especially going fast. Not very wise.

[@no_future9026]

What no new toroidal props? lol She looks great man.

[@fullhizzfishin4969]

those new outboards are sexy brother!

[@fullhizzfishin4969]

oh gawd!

[@theusconstitution1776]

HEY ADAM NICE BOAT🇺🇸 WHATS OPEN IN EARLY 2nd WEEK AUGUST? MAHI MAHI❤️ ANY KINDA GROUPER❤️

[@TheJimCarroll]

Switching to lithium you should save almost the weight of the larger engines.

[@rgutomo8141]

nice boat looks, by from indonesia

[@andricgutierrez135]

i will never forget the day that landshark outdoors shouted u out, now i watch you more than him🤣😅

[@keptoutsideproductions]

do you have to have a captains license to have a commercial sale license?

[@AnthonyC249]

yes lol

[@wakensled]

no

[@TheJimCarroll]

Put drains on your rod holderS

[@abvevo6406]

Looking good man, love the new motors. Actually from Jupiter, now in Illinois with work, brings back memories fishing. 🍻

[@fishingwithmax8248]

Missing the old chestcam footage😤

[@piggway]

you needed twin prop 350's...............he,he

[@MississippiSaltwaterFishing]

What’s up Mr Adam I’m a junior in highschool from Mississippi and I fish every day and got interested in the KZbin stuff and want to start my own channel so I wanted to ask your opinion what do you think a good first camera is for me

[@bgonz3599]

You never confirmed the cost of the motors and install? I have been Nicole and dimming a Suzuki dealer not too far from me. Finally, today we agreed on $41k supposedly that's with the March incentive and the 4-4-2 program. Still have a gut feeling that I'm paying to much? The motors will be 2024 fly by as well

[@kawiman561]

Great video guys. I have the exact same motor on my boat and I'm very happy with it.

[@usmanfalah3431]

if you love to see hard working people fail in life.. Welcome to my life... Adam's the reverse of it.

[@skullhart]

Charter prices will be cheaper now with all the saved fuel

[@leerobinson7086]

You should of built a new boat from scratch. After all the painting and motors you still have a old boat with new motors. And in the long run it is costing more money than if you went all new!

[@MovinWeightFishing]

The only thing that’s old is the hull. And there is nothing wrong with that

[@margaretgauthier4527]

absolutely, you can have an old hull that could be better than some of the new ones.

[@tomjones7853]

Your daddy repowered your boat

[@margaretgauthier4527]

are you jealous?

[@rongeipel7076]

HELL YA u will love them Suzuki there quiet and sipp that fuel I can see more east bound trips to ole bootle bay in the mix can’t wait congratulations on the repower never to much power on a boat cmon 👍💪💪💪💪🏁🏁🔥🔥🔥💪💪

[@merrick-cw1sw]

First

[@MyersJ2Original]

Those engines are about 9500 each, so if you spent 40K you failed.

[@MovinWeightFishing]

So throttle, rigging , gauges, PA pump, new ram, new helm new fittings. U sure?

[@MovinWeightFishing]

And not entirely sure where you see 9500 each oh also, no labor ?

[@natehowell793]

9500 that’s how much a 90 hp cost

[@georgeniebergall7074]

I don’t know why you didn’t finish the inside what you just showed cause it’s disgusting. I would’ve painted that definitely before I put all my stuff back in it. That’s just me though I guess what you can’t see it doesn’t bother you.

[@margaretgauthier4527]

you are absolutely right: It's just you.

[@scary_scat3924]

What happened to the 50 pounder