I Installed A Flowmaster 40 Series Muffler On My Ford F150! | Sounds AMAZING! | NO WELDING NEEDED! |

[@AndrewDoesLife]

2004-2008 F150 Mods! - amzn.to/3uvY2j9 2009-2014 F150 Parts! - amzn.to/42A6KJZ 2015-2020 F150 Accesories! - amzn.to/3uv75Ry

[@volcombrdr16]

Your issue with the pipe sizes was due to going to 2.75 adapter. If you got a connecter specifically for 2.5 outside dimension pipe (which the existing exhaust pipe and outlet on muffler is) it would have snugged right up.

[@anthonyrippo8518]

All you needed was a band clamp. Dont worry about the muffler smashing you. Worry about your truck with that jack and no jackstands.

[@davidbleyl3163]

The muffler inner diameter is 2.5 and the pipe comming from the truck is 2.5 outter diameter so the muffler should have fit over the pipe

[@Antyperspirant]

16:00

[@arride4590]

Thanks man, I dont know why some youtubers dont go directly to the point.

[@Slowroll90]

Adriano R. Because the ad revenue structure encourages this style of vlog.

[@jlkailua]

Adriano R. This was an instructional video. That’s why it was long.

[@stunbu8958]

Not the hero I deserve

[@capri8225]

Past all the bullshit thanks

[@markcollins5026]

Man, I have a 2009 f150 with a 5.4 engine, I had my local muffler shop replace just the muffler with a flowmaster 50 series muffler and a nice chrome tip it's all welded up no clamp's sound's great !

[@AndrewDoesLife]

Mark Collins I wish SO bad I had a garage or some space to do some higher intensity projects like welding. This muffler sounds amazing though! I got compliments all the time on the sound of the engine

[@dustinstammen8991]

How much did they charge you for that just wondering?

[@markcollins5026]

@@dustinstammen8991 I had it done at a local muffler shop they had the flow master 50 in stock, all welded up with a nice 3 inch chrome tip $270.00 !

[@rndemetro]

I had that original 40 on... took it off after a week and threw on the super 10. Barely any drone on the 40. Tons on the 10. The 10 is extremely loud at WOT. I enjoyed the 40! Great sound.

[@AndrewDoesLife]

Yeah my only reason for not going with the straight pipe on my truck was that I didn't want any loud noise in the cabin from the drone of the pipes. The 40 makes an incredible sound without any nasty drone noise in the cabin of the truck! Great product!!!!

[@lvlndco]

You will need to get some more pipe to get it routed out the side but need to do that ASAP. The exhaust blowing on the tire will likely either cause a blowout or other damage as that is a lot of heat. The new muffler sounds good. I think the pipe fittings they sold you are for welded connections but those cuts look like a good work around so you didn't have to go searching for more parts.

[@AndrewDoesLife]

Thank you Jeff, don’t worry, the flexible exhaust pipe is on its way it just hasn’t arrived yet. Once I get it the exhaust tip will stick out to the side still but will not be anywhere near the tire, the set up I have is just a place holder for now. I am in love with the way this muffler sounds. It’s so crazy that there’s little sound at all in the cabin but with the windows rolled down it sounds low and mean hah

[@dadlovestofish]

When I was watching I thought the same thing. Andrew glad you posted this video! Thank you! And glad you added that extender.

[@frantruck919]

I love this f150 generation. 5.4 is very reliable especially with the updated oil pump.

[@michiganmoto666]

Bro ive had to change coils aloy

[@michiganmoto666]

Alot

[@Marco-fi6gv]

True, love my 2006

[@ceaar1600]

Had a 40 series installed in my 04 expedition & BIG difference!!

[@AndrewDoesLife]

@@ceaar1600 very nice! 👍🏻

[@fightingwolf4249]

How was the interior noise. I'm looking at getting one but with kids don't want to drown the interior out

[@chrisvill54]

It's loud in the cab because your exhaust is coming out right under your cab but if you run it to rear or to the side it won't be as loud inside the truck.

[@AndrewDoesLife]

That's a good point Chris!

[@nickcox8958]

Ran my 05 straight piped like that for a year or two wasn’t really that bad honestly. It’s much louder now with long tube headers, no cats and a “muffler” which is straight through flow. Your problem with the 2.5 inch adapter would be you didn’t get 2.5 inch ID (inside diameter) which is meant to fit over 2.5 inch OD (outside diameter). Your truck sounds good I’m glad you’re happy with it. This is what started my exhaust mods on my truck😂

[@AndrewDoesLife]

Thanks Nick! Yeah, with the connecting pipes its a learning experience for me and now I know what NOT to do next time haha! I am very happy with the way it sounds now, every time I start it up and hear the low rumble I can't help but grin. I'm definitely considering getting dual exhaust next

[@otnielo.t.manary273]

@@AndrewDoesLife I will try to post some pictures and video of my truck also, before and after.

[@JermxVee]

@Nick Cox i had a friend with your same name back in middle school before he moved away. This reminded me of him.

[@joshm6012]

If it says 2 1/2 or whatever on the connector, it should fit the 2 1/2” pipe. It’ll seem like it won’t at first but it should be a snug fit.

[@sendit2873]

only if it is for 2 1/2 inside diameter there are two different types if it is 2 1/2 in outside diameter it is the exact same size if it says outside diameter it slides over the pipe if you are not a good mechanic you should not work on cars a parts changer is not a mechanic you need to know what things are why and what it affects not just cut the pipe put a cold air intake and because it sounds good you have more horsepower learn before you tear up a good car or truck

[@ΜολονΛαβε100]

That’s awesome! I used to have an old 95 Camaro and had dual flow master 80 series exhausts on it and now I have a new F150 STX and let me tell you the Flowmasters never disappoint. Miss that car dearly. Although I miss my Camaro, I am contemplating getting the 80 series for my 24 STX in the future. Us women love our trucks too! For the love of vehicles, I always say… Be unique. Make it yours. 😊👍

[@themachine81]

Great job.. next mod must be new tires all terrain

[@AndrewDoesLife]

Yes those tires are getting a little bald and I need to move up a size as well. 33 inch tires look great but with the added fender flares they get dwarfed and don't look proportionate to the rest of the truck. Next set of tires will definitely be either 34 or 35 inches!

[@hadenflemming9011]

What sound a little quiter then a flow master super 44

[@kagome122885]

Love it! That deep tone of the Flowmaster reminds me of a racing boat

[@65raven]

Just bought a FlowMaster 40 for my 08 F150. Your video helped me decide. Thanx!

[@AndrewDoesLife]

Good choice! That thing is going to sound great!

[@Ohiocountryboy-se2cn]

Funny how the exhaust is so much smaller than my f250 superduty with the 5.4. It has 3 inch exhaust factory

[@matthewholtz3539]

I have no idea why I started watching this and yet i couldn't stop watching. Sounds great. Skipped the burnout though, but maybe next time. Go get em Tiger!

[@AndrewDoesLife]

Thanks!

[@chriskubond6314]

Alot of really useful information in this video. This will definitely help out people who are looking to do the same thing as you. Nice job!

[@AndrewDoesLife]

Thanks Chris!!

[@roper2234]

Sounds good. I had a muffler shop put mine on. 3" in and 3" duel out muffler dump.

[@AndrewDoesLife]

I really wish I had access to someone who welds haha I used to back where I grew up but where I live now is a different story

[@wesleybrabant3595]

First of all...big shout out to Zoe. Thanks for the video. Flow master 40 might be my way to go to.

[@gunemdownoutdoors4685]

Glad my 5.4 isn’t the only that crackles and pops 😂

[@Marco-fi6gv]

There are many different connectors out there, you got the wrong one. That is why you had trouble. You shouldn't have to modify the connector with those slots, if you got the right one it would have slipped on. I just had to replace one of my clamps I went to the AutoZone to get the pipe clamp. You definitely need a 2.5 " clamp. They should be labeled with the diameter and an id or od after it. I prefer the flat connectors that have the clamp built-in like the one you showed at the beginning. They conform to the contours and get a better seal. It's also better because you get on either side of the joint, on both pipes. Walker makes a good one, it's called the mega clamp and it is slightly tapered so that tighter fit around the smaller pipe. They are made specifically made for an outside to inside diameter joint so they really work well in my opinion, definitely prefer them over u-bolt style. When I did mine I opted for a cat back system so I replaced the muffler as part of that. Very happy with the results and it's been very durable too.

[@AndrewDoesLife]

Thanks Marco!

[@Marco-fi6gv]

@@AndrewDoesLife thank u for taking the time to make your videos 👍.

[@2010stoof]

Lol. Just get 2.5" ID (inner diameter) connectors. What you got was 2.5 OD (outer diameter) originally. Your pipes are 2.5 OD. You need 2.5 ID to fit over your pipes.

[@ChopsDV8]

Oh I remember my first lesson on inside and outside diameter... Good times

[@tylerlovick6863]

Love the video! Ive wanted to get into the flowmaster mufflers and I’ve decided I would. What else should I get along with the muffler? Cause it’s an old car and I’m pretty sure there’s stuff I should get along with the muffler, but I’m not sure what that is?

[@billmelater9327]

Sounds like it is running rich with all the backfire. Have you done the spark plug swap? The three piece ones need to be replaced. Will make a huge difference. Would have angled that pipe to the ground instead of to the tire. Sounds better than stock. Have the same truck and always love to see what others do to modify their f150.

[@georgew2283]

When you bought your connectors you should be paying attention to the ID and OD of the parts. Two and a half inch ID fits two-and-a-half in od

[@Travis_Manu_Blessed_by_GOD]

Exactly how I felt when I first put the 40 series on my 04 F 150, also cat delete but now I think I have a hole or leak I need to fix but I love it . I might put the 44 series just to see if I like the deeper rumble I hope its as loud as the 40 though . nice video bra

[@scottanderson572]

I’ve had both. The 40 is louder.

[@dentondunn4346]

@@scottanderson572the 44 is deeper but quiet. The 40 is loud and sounds awesome

[@kaptkrunchfpv]

Need a 2.5 ID connector, i imagine that 2.75 left alot of leaks

[@CW_Filmz]

“Super nice v8” Great video!

[@Circlesarebae]

do you have to get the full exhaust pipes too or can you just get the flow master and keep your old pipes?

[@AndrewDoesLife]

You can keep your old pipes and hook them up after installing the new flow master

[@Circlesarebae]

@@AndrewDoesLife So you can just replace the box looking thing and nothing else?

[@bigguy1403]

Sounded best with the flow master!

[@swade6660]

I just put a super 44 on my 08 f150 and did the same thing you did. Went out the side and mine is still under the truck. But freakin sounds so awsome. Love your channel bro.

[@AndrewDoesLife]

Thanks Swade!! I love the way these mufflers sound on our trucks

[@andrewwestphal8130]

I recall you making the comment that you don't want to hear that noise inside your truck when you're driving. What makes you think anybody else wants to hear it outside of your truck.... just wondering?

[@otnielo.t.manary273]

Very nice video Andrew. Gave me some ideas, for sure! And thank you for taking your time, I mean, you and your Papa and put this video together.

[@AndrewDoesLife]

Thank you very much! Only thing better than working on my truck is making memories with my dad!

[@otnielo.t.manary273]

@@AndrewDoesLife - Dude, that's the most amazing thing a Son can do as you together enjoy life doing stuff and creating things. Your Dad is a cool guy. Because of your video (this video) I went straight to your Dad's page and subscribed already; also I did subscribed to your channel. I have a question, if you can help me about my 2012 F150 3.7L V6, what would be the size of the pipe I should get, is it 2.5" or is it 3" ? - When I went to Amazon, and because I had bought many other stuff for my truck through Amazon, it popped up a message saying "this doesn't fit your truck". I searched it on americantrucks.com and in there they said it would fit and is universal; but again, it is listed as 3" pipe. I truly appreciate your insight!!

[@AndrewDoesLife]

Well, I believe technically the pipe starts out at a 3 inch pipe and then goes down to the 2.5 when you get to the tip. If you’re going for a muffler replacement like I did or something along those lines a 4 inch pipe would be my suggestion just to be on the safe side

[@chrisratliff87]

The one clamp that you thought was extra was the clamp to connect to your exhaust pipe

[@elizabethbrown1264]

When you’re driving on the highway or going 50+ mph, does it create a lot of noise in the cab that makes it hard to hear conversation or radio? I’m thinking about putting the 40 series on my 03 Tacoma

[@AndrewDoesLife]

Honestly the faster you go, the more quite it is. On the highway when I'm cruising at 70mph it's pretty quite.. It's when you are accelerating from a dead stop at a red light that it is pretty darn loud

[@elizabethbrown1264]

@@AndrewDoesLife ok! I just got mine installed yesterday and I love it!

[@AndrewDoesLife]

Awesome! 👍🏻

[@haydenbosarge2023]

It sounds amazing bro I love it!!! Keep up the good work🤙🏻🤙🏻🙏🏻

[@AndrewDoesLife]

Thank you Hayden!!!!!

[@thedankgentlemann]

Has anyone put it on the 4.2 v6 that in the 11th gens? i have one and i want to do this but i want to hear the sound first

[@briancastro4419]

That laugh @ 6:37 when the truck turns on with just the straight pipe, lol!!!

[@AndrewDoesLife]

LOL

[@gamin_draven2878]

Bro that’s awesome! I just got a 40 series delta flow for my 05 2.0L dodge neon! Gotta get a different hanger because dad ordered the wrong size. Otherwise it’ll be on it in a few weeks. Can’t wait for it

[@AndrewDoesLife]

That's awesome man! I've ridden around in some of those SRT4 Dodge Neons and man oh man are those things a blast! So quick and agile!!!

[@gamin_draven2878]

Andrew Does Life oh yeah, still can’t wait in the coming years to get my first truck! (F150) The tough part is saving up money

[@AndrewDoesLife]

Yeah that part is no fun but it makes it so much more worth it when you finally get one and you earned it!!!!

[@gamin_draven2878]

Andrew Does Life True, gotta keep er movin and work work work

[@ryangyori9316]

You should put some wider wheels on the truck. It’ll look better with those fender flares!

[@AndrewDoesLife]

Hey Ryan, I totally agree! Bad part is tires can get real expensive real fast haha definitely will going bigger in the future though!

[@ryangyori9316]

Andrew Does Life yeah I feel ya. I’m in the same boat with my f150 everything is to expensive 😂

[@AndrewDoesLife]

Ryan Gyori dang bro did you jinx me or what? I left work to go to lunch today and one of my tires was dead flat lol

[@hawaiibikekahuna8204]

Wouldn't the collar version of the clamps work better?

[@AndrewDoesLife]

lol believe me, there were more than one mistake I made during this process 😂 but you live and learn!

[@LeadStarDude]

Flowmaster super 40 is the best aggresive muffler for a truck. Has a deeper sound, and the super 40 has a thicker casing than the original 40 or super 44 which allows it to handle a higher flow for higher horsepower engines.

[@AndrewDoesLife]

Very nice!

[@LeadStarDude]

@@AndrewDoesLife Thank you. I put one on my 2005 single cab Daytona edition Ram 1500 and it sounds great. Still the factory y-pipe, but no cats. I got the single 3 inch in with dual 2.5 inch out super 40. Installed a custom tune as well and it really made a difference. Doesn't shift out of 3rd into 4th until 140mph, and still has all of 4th and 5th to go from there. Fastest I have ran it is about 150mph. Love having the speed limiter turned off.

[@AndrewDoesLife]

150?? That aint bad at all! I love the concept of a fast truck. The Chevy SSR, Ford Lightning, and the SRT 10 RAM trucks are all on my bucket list for my dream garage haha

[@LeadStarDude]

@@AndrewDoesLife I would love to have any of those myself. Especially the SRT 10. I bought my Daytona used back in 2007, and with the modifications I've made to it I can run nose to nose with a Lightning. Buddy of mine has one, and he does beat me, but never more than the nose of my truck beside the front of his door.

[@AndrewDoesLife]

I especially love how the srt 10's were manual transmissions. Would've loved to see the lightning with the same set up but in a 5 speed manual

[@JKelly-rh3sn]

Did Flowmaster stickers come in the box?

[@REDRUM-S650]

About to do mine..instead of running the pipe underneath the bed I’m going to cut out a 4in hole slap a bezel on with a 3.5in tip and run a bed dump exhaust

[@AndrewDoesLife]

Dang that’ll be awesome!!!

[@BobSmith-mc7uq]

Fine job there Scooter! One cobbled muffler, ebay ricer tail lights. What's next, 6 inch chrome tip with LED lights?

[@AndrewDoesLife]

Lol! Oh Bobby 😊

[@felipebuenrostro4371]

Good job bro, I installed the same one but had it welded on. Wasn't too happy with the sound then I got 4in long tip with 2.5 outlet and it sounds amazing. Should have waited for this video before I welded.

[@AndrewDoesLife]

Dang Felipe I’m sorry to hear that! I mean, technically you could just cut it off and do the connecting pipe and clamps like I used lol. I’m sending back the extension pipe I bought off amazon, I thought I would use it but turns out I didn’t even need it lol

[@mkowboy13]

The carbureted vehicles were fine to straight pipe but the censors on the new ones lol it won’t work properly to straight pipe a fuel injection

[@Hudson250F]

Did you tune the truck or is that the factory tune

[@AndrewDoesLife]

@@Hudson250F that is a factory tune

[@Hudson250F]

@@AndrewDoesLife well I will be getting a new muffler. And thanks for replying I’ve left lots of comments on people’s videos wondering this and your the only one who replied. Thank you

[@AndrewDoesLife]

@@Hudson250F anytime my guy! I try and answer everyone’s questions.

[@kenfett7070]

Greatest videos on KZbin! Gotta do this to my 2007 Fx4

[@AndrewDoesLife]

Dang Ken I don’t know about that but thank you very much, I put a lot of effort into trying to make y’all fun, enjoyable content!!!! I would 100000% recommend you do this to your truck. It sounds SO awesome when I’m driving around town. I wish I had done it sooner

[@BlueEyedAmerican]

I used to work at the Sacramento branch until they outsourced to China, Shame I loved that job.

[@AndrewDoesLife]

Dang man I am sorry to hear that!

[@BlueEyedAmerican]

@@AndrewDoesLife it happens

[@notarypublic2426]

Great job! I always enjoy your vids. I have the same truck but a 2008 V8. What’s your opinion on the Borla Muffler?

[@AndrewDoesLife]

Thanks! I try and make them as genuine and helpful as possible! I don't have any personal experience with Borla, I have heard that they make great products though.

[@fossilguybmf4210]

I have a Camaro 2SS with 6.2L LS3 , I put Borla S series, the middle agressive ones on from cat back. They are expensive, but when you put your foot in it you hear a big angry motor! I have Flowmasters on my trucks, and one truck has had them since 2004. You can go to the Borla site and hear audio of their exhaust systems, also shop around, prices vary.

[@AndrewDoesLife]

Thank you for chiming in fossilguy!

[@alancarter8573]

Great job. But from my experience from doing that, the right rear tire will wear out faster than the other ones because of the heat that transfers to the tire as you drive down the road.

[@AndrewDoesLife]

Great point! I did eventually reroute the exhaust so it was not directly flowing out onto the tire

[@christopherrenteria2810]

Hey Andrew I just installed a flow master super 10 with a down turn on my 06 f150 what sounds should I look out for for future problems?

[@AndrewDoesLife]

I have not experienced any problems after installing my new muffler. I suppose I would be listening for rattling which would tell me one of the connection points/pipe clamps are not secured properly

[@christopherrenteria2810]

@@AndrewDoesLife would you recommend going back to the shop or possibly doing it my self? And I very much appreciate the reply following your tutorial on building my f50 into a raptor style

[@AndrewDoesLife]

I did it myself and had no issues. Just make sure those clamps are nice and tight haha

[@billygoatracer]

Good job and better if you d Turn the clamps up or to the side that way you don't see the bolts hanggang down or snag them on anything

[@AndrewDoesLife]

thanks Billy! Good call on flipping those u-bolts around!

[@brysons9495]

How did you hang hangers I have exact exhaust and truck and can’t figure out how to use the hangers that came with the exhaust

[@brianbowen9024]

Whyd it pop at the end.. sounded soo good then the pop scares me.

[@frantruck919]

Don’t sell this truck you don’t see many of them on the road. They look really good when they are customized. You should also get a Edge programmer for this truck. It’s increases horsepower by 20-30 and torque by around 30-50

[@AndrewDoesLife]

Honestly, if you swap out the spark plugs and oil pump that comes stock, this might be one of the best workhorse engines ever built. I love this thing. I still haven’t replaced the oil pump but I need to badly and I will soon. I’d love to get a programmer, they’re just a little pricey for me to get right now

[@frantruck919]

Andrew Does Life yea same I don’t have one either yet but my friend has this truck with an edge programmer and a few mods to make this truck faster and his truck went from 0-60 in 6 seconds. No turbo and no supercharger. I understand a truck doesn’t need to be fast but it’s always nice to see a truck that can go that fast.

[@AndrewDoesLife]

Man that is awesome! You'll have to send me what all he has done to his truck so I can look into it. I'm all for having a sleeper truck that can go fast if need be haha

[@frantruck919]

Andrew Does Life I don’t have a link but he has a Edge programmer, the one that add 30 hp and 40-50 torque. He has high flow cats, cold air intake, dual exhaust, stock tires, and updated oil pump. I think he has something else but I forgot what it was.

[@AndrewDoesLife]

That's awesome. I would honestly love a programmer for my truck.

[@cris-nb4lv]

I'm gonna use this to straight pipe my truck

[@AndrewDoesLife]

Dude no lie after hearing how it sounded when it was straight piped I was tempted to leave it haha it sounds SO mean!

[@garrettlamb9916]

If your truck is like mine, you won’t need a sawzall! It’ll just rust and fall off eventually!

[@Miguel_aj24]

Good job bro! Sounds awesome.

[@AndrewDoesLife]

Thanks Michael! I'm super happy with the way it turned out

[@Davidcruize4590]

Where can I find your f-150 logo for the sides of your truck?!? I’ve been looking for that one everywhere!

[@lawnsmaster4777]

No muffler was good 👍

[@IDrag]

Would this fit on a 2000 GMC Sierra (v6 4.3l), I was going to get a super 10 but many reviews say there is a ton of drone noise. When I look on amazon it says it won’t fit my vehicle, but I find that hard to believe, any tips?

[@AndrewDoesLife]

I believe it only says that because it’s a universal fit and not a direct, bolt on replacement. It said the same thing with my F150 and it fit perfectly. You should be fine!

[@IDrag]

Andrew Does Life Thanks man! Just ordered a 40 series a couple of minutes ago, first mod I’m doing to my truck, can’t wait!

[@AndrewDoesLife]

Drag that’s so exciting! Can’t wait to hear how it turns out

[@dillontraurig9976]

Yee yee Andrew what up bro!

[@AndrewDoesLife]

Dillon!!!!!!!! What’s up my guy!

[@Velocity556_]

I’ve priced this and if you rent a saw zaw it’s around 300$ to do

[@trentbarrios2350]

Dude that sounds sick! Great job.

[@AndrewDoesLife]

Thanks Trent! I'm super pumped about this. I think it sounds awesome

[@SteelBelted]

Is it tuned or are the phasers locked out?

[@timsoutdoorshunting4469]

Needed a 2.5 OD connector. That would of slid over each peice of pipe

[@KevinSoupy]

Are your cats loose or have a hole in it? Jw that put put “wastegate turbo” like raffle lol but you have no turbo

[@fossilguybmf4210]

I would leave a review on Amazon about the 2.5 inch pipe. Just to inform others of possible misfit on the suggestions of purchase together. Also as usual great job! I answered a comment to one of your comments, not trying to be intrusive, I just happened to know about Borla.

[@AndrewDoesLife]

I will definitely be doing that once I process the return on Amazon. It's funny to me that they would make it into a bundled deal on their website if they aren't even the right fitment! Bad advertising. Thank you for the kind words! I don't mind you answering other people's comments and questions at all, I would rather this be an open, community discussion than just me rambling on

[@bobbatman3338]

Which 40 series muffler -- the original 40 series,; the 40 series or the 40 series delta flow?

[@AndrewDoesLife]

This is the exact one I got -- amzn.to/342TaCC

[@TheZombieboy22]

Unfortunately I don’t know as much about this stuff as I wish I did, so this may be a dumb question with an obvious answer that he may have said and I either missed it or didn’t understand. But if I was to get this muffler and install it without doing anything else to it, would i get that same sound?

[@AndrewDoesLife]

Jake DiLonardo if you have the same engine as me, yes you should get the same sound. Most V8s should sound really good with this muffler so if you have a Chevy or a Toyota truck with a V8 it won’t sound exactly the same but it will sound good

[@-Legions-]

What brand of wheels do you have? I’m looking for a similar type

[@cris-nb4lv]

Why does your truck make those popping sounds?

[@Juliuscaesar69th]

Most vehicles do that especially without a muffler

[@josephdargerjr9766]

Gonna do this to my 05 f150...gonna be cool.thanx for the video bruh

[@AndrewDoesLife]

No problem my man! Glad I could, good luck with your project!

[@josephdargerjr9766]

Actually someone gave me a 2005 f150...he said it lost oil pressure and died...didn't knock or nothing just died and wont crank...he says it needs a motor...I haven't gotten a chance to look at it hopefully it's just a senser or somthin stupid like that...yall let me know if yu know what it could be?

[@AndrewDoesLife]

Joseph Darger Jr is it a 5.4 triton?

[@josephdargerjr9766]

Yes it is

[@AndrewDoesLife]

Could be a timing chain issue due to a sub par oil pump. Pretty common with these trucks and that engine

[@Scorpio_1974]

WOW! Ok. I think I know what I want now...I have a 2006 Ford F150 CrewCab 4 Door XLT Triton v8 4.6L I have that HUGE ass Muffler to replace lol!

[@AndrewDoesLife]

Lucky Underwood lol! Happy to help 😎 I love the way my truck sounds with this muffler

[@matthewa6966]

doesn't this heat up the right rear tire excessively , brake lines and fluid , rubber , ??...have ya had any problems with blowouts and longer drives ?

[@AndrewDoesLife]

Hey Matthew, I had the same thought and rerouted the pipe to where the outlet was nor directly facing this tire area. I did take a 6 hour with this set up with no issues too.

[@matthewa6966]

@@AndrewDoesLife thanks i appreciate your response , im a worrier , safety first , good luck with the truck

[@AndrewDoesLife]

@@matthewa6966 thank you!

[@orangepeel2223]

My 2013 150 5.0 has bigger stock exhaust....and get some godamn tires!!

[@warpoet6977]

Yup I’m gettin a 40 series... great video thanks 👍🏼

[@AndrewDoesLife]

Right on!

[@davidalley7270]

I put a Flowmaster super 10, one muffler 2 in 2 out.... on my 2005 F150 4.6, sounds awesome...

[@AndrewDoesLife]

That’s awesome! I was a little nervous to use the flow master 10 since it was advertised as having such a crazy aggressive sound to it.

[@gregperez5831]

Got the same truck and now I’m going to do this... was thinking welding but this works as well

[@popeyeandstraussmx4165]

I heard that noise, you got gutted cats or high flow cats😉

[@AndrewDoesLife]

😎😎

[@stevengonzales2238]

Got to get rid of that resonator then you'll hear alot better difference

[@dreadsire5086]

And here I am wishing my truck was quieter lul

[@machinistmikethetinkerer4827]

Doing a super 40 on a 2014 150 5.0L. Thanks for some ideas n tricks.

[@AndrewDoesLife]

Heck yeah that’s going to sound amazing

[@machinistmikethetinkerer4827]

@@AndrewDoesLife you need to tell dad he needs a lift in one of those stalls! Either that or you get a proper creeper! Lol

[@matteliano454]

I have a nephew with a loud ass Chevy Silverado. How many times I've wished I had a RPG to take that fucker out when I can't even hear my own tv in my living room LOL.

[@AndrewDoesLife]

😂😂 goodness!!

[@bryanbiltoft8141]

It looks like you could use some new tires.

[@AndrewDoesLife]

Oh believe me at the time I needed new ones badddddd haha

[@dexterthompson1809]

didn't see a jack/axle stand in video. very safe...

[@tacomafia9889]

do you still have the resonators ?

[@MetalRocker94]

When the 2.5 exhaust pipe wouldn't go over the 2.5 inch muffler. You could've used a butt joint clamp.

[@AndrewDoesLife]

I think that would have been the easier option to go with. If I had known what I know now going back I'd go with the butt clamp for sure

[@nicholasross8551]

Man I love your channel! Just found it as I just upgraded from a ranger to my 06 f150! So stoked that theres a decent channel to learn how to do some mods to my exact truck on youtube. Any chance you can show a demonstration of the GOTTS mod?

[@AndrewDoesLife]

What’s up my man Nicholas!!! Welcome to the channel! I’m familiar with the GOTTS mod and how to do it, but I doubt I’ll be doing that to my truck. I already tried installing a cold air intake on my truck and I didn’t like the outcome so I went back to the stock intake. I’m nervous about changing the intake system from the stock without adding a tune to compensate for the difference in air intake

[@johnvandewater9576]

Sounds like shit

[@raulmichel7630]

My next modification to my 10 Gen.

[@bobr7206]

Hey bud Just put a straight pipe piece inplace of muffler sounds alot better. And not to loud

[@AndrewDoesLife]

I was actually surprised that the straight pipe sounded as good as it did haha but I need it to be quite in the cab of the truck when I'm driving around. Straight pipes would be so annoying for me when I take those long drives

[@bobr7206]

Suprisingly there not bad in cab. I initially just remove the muffler and put a single piece of straight pipe in drove with it like that for a while and really you don't hear that in the cab at all. Then I took it to the muffler shop and had it true dual straight pipe straight from each cat back and i love it. These trucks are pretty well built so no droning or anything. I like mine loud and proud ! But sounded good keep the vids comin

[@AndrewDoesLife]

Bob R thanks Bob! Not going to lie, I LOVE how loud it sounds when I first start the truck up. It sounds sooooo mean and aggressive

[@gregoryratliff73]

can you imagine this guy drunk or even worse on dope??? lord have mercy he’s high strung!!!!!

[@AndrewDoesLife]

:)

[@maniacalmonster2293]

still sounds like there's a soda can poppin around in there

[@razorfrank37]

Awesome vid bro I got the same year truck been wanting to make some upgrades thanks .

[@AndrewDoesLife]

Happy to help, Frank!

[@zaneseligman1313]

O6? Man gotta have 200k+ miles- I’d be more concerned with all that standing water by the house- most likely a drainage problem related to an improper land grade. Reposition the dirt to get the proper run off or bring in a mid size ballast to assist in a timely absorption rate.

[@AndrewDoesLife]

Lol this guy