I Lost my MIND Building 10,000 Steel /min in Satisfactory

I Lost my MIND Building 10,000 Steel /min in Satisfactory
Satisfactory gameplay today and we need 10,000 steel ingots to craft 7000 steel pipe per minute. That'll mean hundreds of Foundry's and Constructors will have to be built, so we'll be designing some new blueprints to help us out!
🟠 ➤➤ Patreon - / imkibitz
🔴 ➤➤ SUBSCRIBE - goo.gl/47a9J3
🔵 ➤ TWITTER - / imkibitz
🟣 ➤ TWITCH - / imkibitz
🟢 ➤ SPOTIFY - spoti.fi/3NFcOsh
Custom music is COPYRIGHT FREE for your streams and videos!
Available wherever you can listen to music as well, hope you enjoy!
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
#imkibitz #satisfactory

[@marp_625]

Pain is temporary… But Satisfactory is eternal.

[@sakexz]

so what youre saying is, pain is eternal?

[@epiclink_2190]

*HALO MAY BET INFINITE...* *BUT **_DOOM_** IS ETERNAL!* *_Rip and tear until it is done._*

[@benwoodman1496]

And what does that make factorio?

[@kghyeah9032]

Depending on the next update

[@frogbro9031]

I can’t even imagine myself building these factories! I take my hat off to you Kibs!!😂

[@austin.5947]

Hats of what?

[@frogbro9031]

@@austin.5947 sorry, spelling error

[@JayWheeler1981]

Going to miss your satisfactory playthroughs, hopefully you get a new one started soon after you finish up with this one. Maybe you can build a open concept factory setup next time.

[@Scrapy5]

Hmmm Maybe like a full update 8 play trough??

[@yon_monster]

The commitment to following the terrain with your foundation cap is starting to pay off. All these challenging areas of elevation changes are forcing a detailed look at each space; I think that it will really give the final factory set an interesting visual look overall, imparting awe and unease to the viewer through both the natural scale and a chaotic layout of this industrialized, colonized space.

[@thomasomahony4406]

🤓

[@kaileh57]

The way kibz builds at 9:16 is how I build all my factories

[@armanada7600]

if it works, it works

[@fondertoast]

@@armanada7600 "Ehh, good enough" - Mediocrates

[@yodafloats9090]

Same. everything I did in my first Playthrough I made things thinking I wouldn't need as much stuff as I did to complete the space elavater. It got to the point where I'm like ok I don't care what stuff looks like. Just make me 1 million wire

[@finleygrant3867]

"If it's not on foundation, you face no damnation"

[@gwallace5403]

​@@fondertoastahh that was good 😂

[@ultmateragnarok8376]

This is absurd. At the end of this I do hope there's an episode of just walking around the place. No slide-jumping or flying, just a walk through this chaos.

[@iglofiscj]

I really like the new approach of the all consuming ground production instead of another endlessly growing tower. It really shows off the massive scale.

[@Grumm-Nation]

I cannot wait till he decorates the whole area with buildings and signs, making it look like a Factorio meets cyberpunk type of factory.

[@SIGINTprivate]

I’m starting to get a feel of Borg Cube from your desert build.

[@outzymes3636]

Seeing this you push on and on with these super big megaprojects gives me motivation to make a silly 60 steel plate per minute factory. Thank you.

[@johnnytieszen]

Right I never understood the big factories it's called build small and let the game run for a month lol

[@glennac]

Would love to see another episode of you interacting with the fauna like the previous one. 😅 You dying every few seconds was hilarious. And, it was just as nerve wracking for us as it was for you. 😂

[@_aymann_]

Bro powering all that up should be so hard

[@antonyxd5270]

i struggle to build a simple early game iron rod factory, can't even imagine myself building these giant things. Excellent job Kibitz!

[@chrisxd146]

I just recently got back into Satisfactory after being on hiatus since right before update 5. The addition of blueprints and "zooping" has been a massive game changer when it comes to large scale production, as evident by how fast you can lay down a design for producing 10,000 steel. It's also extremely nice to be able to clip into hotboxes without necessarily clipping meshes, which was something that ultimately made me take a break as I couldn't figure out how else to compact my designs.

[@bad-dogz]

ImKibitz; I've watched enough of your videos to know. This didn't make you lose your mind. Because you lost your mind quite a long time ago. And you can't lose something now that you already lost before. 😄 !!!! A great blend of humor and learning. 👍

[@slothchunk]

i really like the camera work in your videos. there's a scene where you're zoomed in as far as possible making it look isometric. very cool! always love it!

[@Md936S]

Also to avoid having the wrong resources sent you your constructors you could always use smart splitters and set the first one in each block to only accept the right type. If something happens then the whole block stops working but all you have to do is empty the main input line instead of every belt

[@johnp1806]

Oh man this biome project is coming along so well! It looks so great! Good call going back to update 7 to avoid the bug world of update 8 experimental, especially for as much as you're building over there.

[@Daiwie44]

You're amazing! My main source of inspiration atm!! Keep going man! :DD

[@g576758]

ImKibitz is the bob the builder when it comes to this game I have never seen anyone so into 1 game but I'm very proud of the hrs of play time and the magnificent builds he does I tip my hat to you man never stop doing what u do u need a server for this game haha

[@Ampheon181]

i love how spread out everything is

[@user-jg5rr9re4x]

Pain is temporary…But Satisfactory is eternal.. You're amazing! My main source of inspiration atm!! Keep going man! :DD.

[@Taylor_Moon]

hey kibz, when you're building blueprints, you can switch build mode to "blueprint" to automatically snap to existing blueprints

[@isaacmurray8490]

I have got to say that the designers at coffee stain have done a great job at making stuff very esthetic regardless of how it is used. For example, when you put a lift on that foundry, it was like they designed it so it would look like a part of it.

[@zacherykienle8628]

Your factory is starting to get crowded so I suggest that you should have belts go underneath your concrete terrain!

[@bastienpabiot3678]

He built the concrete to fit the terrain so there isn't any space for belts underneath

[@zacherykienle8628]

@@bastienpabiot3678 oh there’s tones of space.

[@2Craft_]

Everytime i get the Magic notification from your channel Playing satis, my day gets better

[@BenRat-cy7rn]

I just always enjoy your videos so much!!

[@Torder]

Honestly the concrete slab was such a good idea looks sick with all the machines built on it

[@kaldeathar3462]

17:16 - that coal belt be clippin!!

[@philippev1136]

Would be cool to see the before and after of the whole base, after the episodes to see your progress!

[@pyromaniacal13]

1:44 Can we talk about how smooth that dismount is?

[@JavierSalcedoC]

Kibitz casually building a Hilbert Factory

[@mweks2531]

Love the look of the chaos

[@tfl.8248]

Kibz: Hideous total chaos, but it works TotalXclipse: Beautiful aesthetics, and it works Scalti: Pure efficiency, and it works

[@philipschmit534]

Basically did a similar build for 7000 steel perm minute. But with the refined power mod that adds a recipe with coal dust. That was just a mind numbing build

[@Geopuder]

the factory must grow

[@antonanton3136]

i feel like kibiz should just take, like, two weeks off of satisfactory and go on a vacation. Cuz MAN he does alot

[@IsotopeInfinity]

I watched a couple vids from your first satisfactory Playlist and you planned to build pretty much the same thing but in the plains biome.

[@eeweazy]

I am currently in my 7th new Factory but still feel like a rookie when I see your videos 😂

[@mytholomania]

I’m just hoping the battery conveyor belt you unhooked wasn’t another important aspect to the build 😂

[@TAiiNE]

The foundries, you could have stacked the imput's and outputs along the front just stack a 3rd splitter then belted them to the back using lifts, easily cram it all into a 1 ina half foundation space instead of trying to run it along the side as you just wasted space with the belt going around the first lift. Plus doing it this way makes it easy to flip and set up more across and connect to the same splitters/mergers, they would just be aligned a bit in a zig zag instead of directly across.

[@jaymorrison2419]

It’s funny, I would have gone SUPER cursed, and gone single line input with smart splitters since the individual input is so small. It will need more balancers off the main material bus lines, but woo compact if you want it to be.

[@tyukogames]

1000 like here, that has satisfaing af

[@kernuba3916]

KIBITZ..Cool design but i revised it a bit by merging the spitters and mergers into the lifts. I have yet to test it. but it'll be some time though Plus i think it might be a tiny bit more compact. I have to thank you for the ideas I keep forgetting to think out side the box when I'm building and using the BP machine.

[@WasCoderman]

jokes on you, im getting this game on my birthday and getting half a million of every resource I PLANNED MY BASE ALREADY

[@pehrljungberg7346]

regarding clipping conveyor lifts. i find snapping the spliiers/mergers directly on the lift looks alright.... ok to be fair i never actually look, i just want to build stuff as fast as possible.

[@mileschaffer3066]

I didn’t know David Cross was this good at Satisfactory!

[@quarklatinum4241]

I must point out the one most important thing that is missing from this build..... the lizard doggo farm. Or, even better, a large monument in the center of the chaos. Make the monument an embodiment of chaos.

[@gp5313]

Love this game

[@WINDEXEIN]

nearves of steel building all that steel

[@charmer23]

Please do a proper captains of industry playthrough once this series is complete. I would love to see what you can create on that game. love you Kibz

[@jaye1967]

Gee Kibitz, I can't believe you didn't want to do all those "adjustments" to get your factory to work in update 8.😄

[@Phobos2085]

11:30 me: "That wasn't too bad. Why is the video title say he lost his mind?" *Sees the video is only half way through* Me: "oh."

[@whatsthisd0]

At 9:50, there was a plastic in your rubber line. Might want to figure out where that went and how it got there.

[@finleygrant3867]

25 minute kibz video? For me? You shouldn't have

[@antonymiller213]

Hey Kibs! Were you aware that splitters/mergers can be mounted to the head of a vertical belt directly? Allows for a fairly compact belt system while also bringing the belts up off the ground.

[@marnixkars539]

the slap is gonna look like a surcut board

[@opertwan1]

Look up totaleclipse’s foundry design. He puts all the splitters and mergers up front and then uses the conveyor lifts in the back to get the inputs to go around the smoke stack.

[@nickevison391]

I Love the Spahett

[@JudgeRightly]

Kibitz, what if you were to rotate the foundries 90degrees and had the splitters/mergers/belts in the space on top of it next to the smokestack?

[@gabrielahrndsen5734]

short Question: how do i add multiple custom swatches (colors), normaly its just one and i always have to get my saved colors from the list and its actually quite time consuming. And since kibitz got like 5 or 6 i wanted to ask here, bc reddit couldnt help :)

[@doesitmatter4293]

Ahhh, 15:06 the passing of the Nuclear Kart

[@116yony]

Are these videos in a playlist? I would love to watch it from the beginning :)

[@angelojasonsukowijoyo2679]

Hi kibz next season's oil plant should be an oil rig for processing a factory

[@patmalloy3569]

Kibitz put the game on hard mode for himself

[@krx7864]

and here i am nearly done with the space elevator quest and horrible 60 steel a minute

[@kelathos]

Future Kibs is going to look at this, and nope right out of the map.

[@rcreccomendationsforpeople3906]

i wonder if you'll ever make your save available for download, would be awesome to explore your impressive, and absurdly large factory.

[@Shy_002]

He did

[@rcreccomendationsforpeople3906]

@@Shy_002 where?

[@smarty265]

This kibs guy loves steel

[@jadengranek7477]

Leave it to kibiz to make one of the hardest factorys completely rid of space efficiency by making it a bumpy slab and refusing to overclock 😅

[@The_Lunatic_Toad]

This is insanity

[@CreamingManny]

how did you do the all black? i did all black and mine does not look like yours

[@zukato_mkrnkt]

Hey, i got some questions for you because its freaking me out how long satisfactory takes to save and its just taking longer and longer, the more you have built. How long does is take for your game to save? How long is your autosave interval? And does your game crash sometimes?

[@zeherath]

4:47 How about belts underneath the foundries? so lifts down?

[@phatJ662]

Bru I still have no idea how people build so cleanly in this game

[@jotunn2396]

try automating refining plant that uses 19260/min iron ore (all iron from desert) and makes +33000/min iron ingots

[@gh0zt286]

I love ur videos

[@CostelloDamian]

How do you get all those nice resource icons on your map?

[@ShadowedAssasin]

I'm definitely a fan

[@jameslocke3069]

Someday try the Magic Splitter Mod. It'll change everything for you!

[@RooSnBert]

Maybe a Factorio playthrough next?

[@TereusHecatonchires]

I love how the Advertisement appeared just as "errors" of experimental branch were ending Kappa

[@SeedlingNL]

I made a blueprint that fits 8 foundries per layer, in a 32x32x9 block. 9 are technically possible, but the shape of the foundry and the position of the output make it nigh impossible without outright clipping through the buildings themselves. My 8-layered one is tight as a button, but with no clipping (or at least, nothing notable.) I also have a 24x assembler that fits within the blueprint designer (2x780 input, 2x 780 output) I really like the puzzle element of cramming as many factories within a 32x32x32 box :D Manufacturers are too big though... I think I can get 4 within a blueprint, but it doesn't look as good as just making a modular setup for a single one.

[@FreddyBensin]

The party’s only just begun let’s continue wow 😂

[@epicwarding]

need to build in 2 tiles? Elevators , and do splitting and merging stuff under or above the building of choise

[@penguincuber1]

21:04 he made an undertail refrain e

[@klokworkkro]

"Welcome back to... Sadist Factory!"

[@MuzafferKrkkalp-hu9xs]

Place power poles under conctete platform so use hover packs

[@danyael777]

I'm not playing the game myself but perhaps you should optimize your blueprints to be stackable vertically.

[@homevids]

The new factory game Techtonica is arriving soon. Hope you play it :)

[@The_Dragon_Bi_dot_jpeg]

kibs how does your game not unceremoniously close without a crash prompt with how much youve built

[@aggiedudesa9206]

Watching at 2x speed only added to the insanity. Strongly suggest a rewatch at 2x speed ;)

[@RatKing56]

My factory would give him an aneurysm.

[@lolmao500]

Damn in factorio you can build way bigger factories... but satisfactory is cool

[@leanschohaus]

bro in the momet you said update 8 is laggy a pop up opened i was extremly scared

[@MarijnRoorda]

If you'd put the belt below the smelters it could have been a even smaller blueprint...

[@nickstephens4918]

Seen a random plastic on your rubber belt 9m 50sec plus 23m 41s u have to on same belt iron and steel on same belt.

[@NewAndImprovedOnSteam]

Mqn i struggle to build a small mettle sheet factory how are you this good?

[@Dude29]

The spaghetti monster is rising

[@finnkas7796]

Crazy? I was crazy once. The put me in a factory, a steel factory, and the steel made me crazy